Open Access

ARTICLE

Construction monitoring and finite element simulation of assembly support for large cantilever cover beam

Chen Qu¹, Han Fang¹, Qingxing Feng²

1 School of Civil Engineering and Architecture, Zhejiang University of Science and Technology, Hangzhou 310023, Zhejiang, China
2 School of Civil Engineering and Architecture, Zhejiang University of Science and Technology, Hangzhou 310023, Zhejiang, China

* Corresponding Author: Qingxing Feng ()

Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 2023, 39(1), 1-7. https://doi.org/10.23967/j.rimni.2023.01.001

Accepted 26 December 2022; Issue published 12 January 2023

Abstract

The study on the assembly support for the large cantilevered cover beam was carried out by conducting real-time monitoring on the assembly frames’ strain and displacement development processes in the actual project. Modeling of the support and numerical simulation for actual working conditions were presented. The monitoring data and analysis results show that the overall stress ratio of the support was less than 30%. And as the concrete structure being supported hardened, the support frame was unloaded. When the stress ratio was then reduced to less than 10%, it was the most appropriate time to remove the bracing frame. The maximum strain from the simulation did not exceed 66.26% of the theoretical maximum strain of the rod. The actual construction conditions and the spatial form of the support affected the force situation, resulting in the deviation from the theoretical maximum strain at certain phases. The analysis results and trends reflect the low utilization rate of such framing rods. The results of the study can be used as a reference for the topology optimization of assembled support frames for large cantilevered cover beams.

---

Keywords

---