Hao Zhang¹, Yongqi Zhou¹, Huaxin Zhu², Dragoslav Sumarac^1,3, Maosen Cao^4,*

Structural Durability & Health Monitoring, Vol.15, No.3, pp. 183-206, 2021, DOI:10.32604/sdhm.2021.018247

Abstract Digital twin (DT) can achieve real-time information fusion and interactive feedback between virtual space and physical space. This technology involves a digital model, real-time information management, comprehensive intelligent perception networks, etc., and it can drive the rapid conceptual development of intelligent construction (IC) such as smart factories, smart cities, and smart medical care. Nevertheless, the actual use of DT in IC is partially pending, with numerous scientific factors still not clarified. An overall survey on pending issues and unsolved scientific factors is needed for the development of DT-driven IC. To this end, this study aims to provide a comprehensive review… More >

Mingyu Lu^1,*, Kaige Zhu¹, Qiang Wang²

Structural Durability & Health Monitoring, Vol.15, No.3, pp. 207-225, 2021, DOI:10.32604/sdhm.2021.017720

Abstract The increasing use of ultrasonic guided waves (GWs) has been shown to have great potential for the detection of fatigue cracks and non-fatigue type damages in metallic structures. This paper reports on a study demonstrating an energy-based damage imaging approach in which signal characteristics identified through relative time differences by fatigue crack (RTD/f) through different sensor paths are used to estimate the location of fatigue crack in steel plates based on GWs generated by an active piezoceramic transducer (PZT) network. The propagation of GWs in the original 10 mm-thick plate was complicated due to its thick geometry, wave dispersion, boundary… More >

Mahmoud Fakih^1,*, Jaafar Hallal¹, Hassan Darwich², Hala Damerji³

Structural Durability & Health Monitoring, Vol.15, No.3, pp. 247-260, 2021, DOI:10.32604/sdhm.2021.015174

Abstract Seismic earthquakes are a real danger for the construction evolution of high rise buildings. The rate of earthquakes around the world is noteworthy in a wide range of construction areas. In this study, we present the dynamic behavior of a high-rise RC building with dynamic isolators (lead-rubber-bearing), in comparison with a traditional shear wall system of the same building. Seismic isolation has been introduced in building construction to increase the structural stability and to protect the non-structural components against the damaging effects of an earthquake. In order to clarify the influence of incorporating lead rubber bearing isolators in the seismic… More >

Nadom K. Mutlib^1,*, Muna N. Ismael¹, Shahrizan Baharom²

Structural Durability & Health Monitoring, Vol.15, No.3, pp. 227-246, 2021, DOI:10.32604/sdhm.2021.010725

Abstract Structural health monitoring employs different tools and techniques to provide a prediction for damages that occur in various structures. Damages such as debond and cracks in concrete-filled steel tube column (CFST) are serious defects that threaten the integrity of the structural members. Ultrasonic waves monitoring applied to the CFST column is necessary to detect damages and quantify their size. However, without appropriate signal processing tools, the results of the monitoring process could not be crucial. In this research, a monitoring process based on a Multiphysics numerical simulation study was carried out. Two signal processing tools: short time Fourier transform (STFT)… More >

Omar A. Saraereh^1,*, Luae Al-Tarawneh², Ashraf Ali¹, Amani M. Al Hadidi³

Intelligent Automation & Soft Computing, Vol.31, No.1, pp. 607-619, 2022, DOI:10.32604/iasc.2022.020216

Abstract The frequency range of the terahertz (THz) band is usually defined as 0.3~3.0 THz, and some scholars have also extended it to 0.1~10 THz. THz technology has the characteristics of low photon radiation energy and rich spectrum information, and the THz band contains the vibration and rotation resonance frequencies of many material macromolecules, which can realize fingerprint detection. Therefore, THz technology has great academic value and a wide range of applications in basic research and applied science. Application prospects, such as THz spectroscopy technology provides a new means for studying the interaction between electromagnetic waves and matter, and its application… More >

Abdelrahman H. Hussein, Qasem M. Kharma, Faris M. Taweel, Mosleh M. Abualhaj, Qusai Y. Shambour^*

Intelligent Automation & Soft Computing, Vol.31, No.1, pp. 661-675, 2022, DOI:10.32604/iasc.2022.020132

Abstract Recommender systems act as decision support systems in supporting users in selecting the right choice of items or services from a high number of choices in an overloaded search space. However, such systems have difficulty dealing with sparse rating data. One way to deal with this issue is to incorporate additional explicit information, also known as side information, to the rating information. However, this side information requires some explicit action from the users and often not always available. Accordingly, this study presents a hybrid multi-criteria collaborative filtering model. The proposed model exploits the multi-criteria ratings, implicit similarity, similarity transitivity and… More >

Nongnuch Saengsura, Saowanit Sukparungsee^*, Yupaporn Areepong

Intelligent Automation & Soft Computing, Vol.31, No.1, pp. 635-647, 2022, DOI:10.32604/iasc.2022.019997

Abstract In this research, we propose the new mixed control chart called the mixed Moving Average-Cumulative Sum (MA-CUSUM) control chart used for monitoring parameter changes in asymmetrical and symmetrical processes. Its efficiency was compared with that of the Shewhart, Cumulative Sum (CUSUM), Moving Average (MA), mixed Cumulative Sum-Moving Average (CUSUM-MA) and mixed Moving Average-Cumulative Sum (MA-CUSUM) control charts by using their average run lengths (ARLs), the standard deviation of the run length (SDRL), and median run length (MRL) via the Monte Carlo simulation (MC). The simulation results show that the MA-CUSUM control chart was more efficient than the other control charts… More >

Noha E. El-Attar^1,*, Bossy M. Moustafa², Wael A. Awad³

Intelligent Automation & Soft Computing, Vol.31, No.1, pp. 325-338, 2022, DOI:10.32604/iasc.2022.019970

Abstract DNA sequence classification is considered a significant challenge for biological researchers to scientifically analyze the enormous volumes of biological data and discover different biological features. In genomic research, classifying DNA sequences may help learn and discover the new functions of a protein. Insulin is an example of a protein that the human body produces to regulate glucose levels. Any mutations in the insulin gene sequence would result in diabetes mellitus. Diabetes is one of the widely spread chronic diseases, leading to severe effects in the longer term if diagnosis and treatment are not appropriately taken. In this research, the authors… More >

Ibrahim Atawi¹, Sherif Zaid^1,2,3,*

Intelligent Automation & Soft Computing, Vol.31, No.1, pp. 449-469, 2022, DOI:10.32604/iasc.2022.019959

Abstract Transformerless inverters have become an important integration of the modern photovoltaic (PV) grid-tied systems. Unfortunately, it has a general safety problem regarding the earth leakage current that must be less than the recommended standards. Lately, the H7 transformerless inverter, which is a three-phase inverter with an additional switch on the DC side, is introduced to mitigate the earth leakage current. Different modulation techniques and controllers are proposed to optimize its performance. This paper proposed the application of model predictive control (MPC) to grid-connected H7 transformerless inverter supplied by the PV power system. In modeling the system, the grid inductance has… More >

R. Kingsy Grace^*, K. Induja, M. Lincy

Intelligent Automation & Soft Computing, Vol.31, No.1, pp. 279-296, 2022, DOI:10.32604/iasc.2022.019947

Abstract Strong associations exist between the crop productivity and the seasonal, biological, economical causes in natural ecosystems. The linkages like climatic conditions, health of a soil, growth of crop, irrigation, fertilizers, temperature, rainwater, pesticides desired to be preserved in comprehensively managed crop lands which impacts the crop potency. Crop yield prognosis plays a vibrant part in agricultural planning, administration and environs sustainability. Advancements in the field of Machine Learning have perceived novel expectations to improve the prediction performance in Agriculture. Highly gratifying prediction of crop yield helps the majority of agronomists for their rapid decision-making in the choice of crop to… More >