Jianqiao Hu^1,2,*, Hengxu Song¹, Xiaoming Liu^1,2

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010554

Abstract Material wear between contact surfaces with relatively sliding can be related to the failure of elevated asperities at small scales. The asperity wear depends on various factors, including material properties, interfacial adhesion, and friction velocity. In this study, using a series of materials characterized by the modified coarse-grained potentials, we studied the rate effect of adhesive wear at the asperity level over a wide range of plowing conditions. The results showed that increasing plowing velocity leads to the transition of the wear mechanism from plasticity-induced asperity smoothing to the formation of fractured debris and thus… More >

Liuyu Yang¹, Peng Jiang¹, Tiejun Wang^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010538

Abstract Air Plasma Sprayed (APS) Thermal Barrier Coatings (TBCs) have been widely used in land-based gas engines for enhancing the high temperature performance due to their outstanding thermal insulation and high durability. Introducing the segment cracks into APS-TBCs to enhance its durability has been quite attractive approaches nowadays. Qualitative conclusions have been drawn to explore the mechanisms on segment crack formation in the past decades. This article acts as a quantitative study of segment crack formation and crack density regulation mechanism in APS Yttria-Stabilized Zirconia (YSZ) TBCs with experimental observations and analytical calculations. An in-situ stress… More >

Qiumeng Ouyang¹, Ge Kang^1,*, Pengwan Chen^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010514

Abstract Impact phenomenon is a complicated mechanical problems frequently encountered in our daily life, especially in the military field. Numerical manifold method (NMM) is a novel numerical theory which is proposed based on dual-topology to solve the continuous-discontinues displacement field in both static and dynamic mechanical problems. In the present work, the 3D-NMM program framework enriched with the cover-based contact theory is developed to simulate the impact mechanical problems. Classic Taylor rod experiments with different length-diameter ratios and hitting velocities (150-250m/s) are systematic conducted with ourselves code. The simulation shows that as the impact speed increasing, More >

Lifeng Gan¹, Baoyin Zhu², Chao Ling^1,*, Esteban P. Busso¹, Dongfeng Li¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010397

Abstract Heat-resistant austenitic stainless steels are widely used in the final stages of superheater and reheater in in the new generation of fossil fuel power stations, due to their high creep strength. Similar weld joints, fabricated using gas tungsten arc welding, for connecting different components made of the heat resistant austenitic stainless steels usually suffer from premature failures at elevated temperature [1]. Experimental studies showed that cracks may nucleate in the heat affected zone or weld metal of the similar welded joints under service conditions. In order to reveal the physical origin of unexpected failures of… More >

Zhenan Zhao^1,*, Weizhu Yang^2,3, Lei Li², Shouyi Sun², Yan Zeng²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-2, 2023, DOI:10.32604/icces.2023.010342

Abstract The hot section components are usually in service under cyclic loading in an extreme working environment with high rotational speed at high temperatures, which is prone to fatigue failure. It is reported that fatigue related failures have accounted for over 50% of all failures of hot section components. Consequently, fatigue related failure at high temperature is one of the most important factors that shortens the service life of hot section components. Ni-based superalloy GH4169, similar as Inconel 718 (IN718), is a γ′′ and γ′ precipitation strengthened alloy. For decades, GH4169 superalloy keeps being an important… More >

Chunxiu Ji¹, Dan Xie^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010329

Abstract Blade flutter is a complex phenomenon that can lead to serious damage or failure of turbomachinery systems. Predicting and mitigating blade flutter is therefore an important aspect of the design and analysis of these systems[1]. In this paper, we present a comparative study of two representative methods for blade flutter predictions: the energy method and the computational fluid dynamics/computational structural dynamics (CFD/CSD) coupled time-domain method. The energy method is a decoupled approach that uses a simplified model of the blade and fluid-structure interaction to calculate the stability boundaries of the system[2]. The time-domain method, on… More >

Shichao Luo¹, Yinan Cui^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010223

Abstract The responses of metals subjected to super high rates of deformation (> 10!/�), as shocking loading, is an area of active research. At such extreme loading rates, subsonic, transonic, and even supersonic dislocation (compared with the shear wave speed in metals) play a crucial role in plastic deformation. The behavior of high-speed dislocations is much more complex than that of quasi-static dislocations under static loads, as their self-force is history-dependent, and their evolution of density is rate-relevant. However, the fundamental questions regarding the self-force and evolution of high-speed dislocations in impacted materials is largely unknown.… More >

Shi Dai¹, Yanping Lian^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010175

Abstract In recent years, metal additive manufacturing (AM) has gained increasing attention from various industries. However, there are few studies on the thermal deformation behavior of additively manufactured metallic components, which is vital to pushing its applications’ boundary. In this work, we first experimentally investigate the mechanical behavior of AlSi10Mg produced by laser powder bed fusion under different temperatures and strain rates. A crystal plasticity finite element model is adopted to provide insights into the intrinsic deformation mechanisms. The model is validated by comparing it with the flow behaviors and dislocation evolutions observed in experiments at More >

Enzoh Langi¹, Liguo Zhao^2,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010163

Abstract Additive manufacturing emerges as an innovative technology to fabricate medical stents used to treat blocked arteries. However, there is a lack of study of underlying microstructure and mechanical properties of additively manufactured stent. In this work, additively manufactured 316L stainless steel stent was investigated, with electrochemical polishing being used to improve the surface finish. Microstructural characterisation was carried out using optical microscopy, scanning electron microscopy, and electron backscatter diffraction. The hardness and elastic modulus were measured using Berkovich nanoindentation, with an emphasis on the effect of grain orientation. In addition, spherical nanoindentation was used to… More >

Xuelian Zhang¹, Junjie Liu^1,*, Jian Li², Zhihong Liang¹, Han Jiang¹, Guozheng Kang¹, Qianhua Kan^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010142

Abstract The last decades have witnessed the real and huge potential applications of hydrogels in various areas, including biomedicine, soft robotics, and flexible electronics. The fatigue of hydrogels challenges their reliability and longevity in service, but the related works are not sufficient. In this work, stress-controlled cyclic fatigue tests of a double-network tough hydrogel, consisting of polyacrylamide and alginate polymer networks, under pure shear deformation are investigated. The effects of peak stress, loading rate, peak stress holding time, and environmental relative humidity on the fatigue of the double-network tough hydrogel are considered. The results show that… More >