Xuechuan Wang¹, Wei He^1,*, Haoyang Feng¹, Satya N. Atluri²

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2023.043068

Abstract Although predictor-corrector methods have been extensively applied, they might not meet the requirements of practical applications and engineering tasks, particularly when high accuracy and efficiency are necessary. A novel class of correctors based on feedback-accelerated Picard iteration (FAPI) is proposed to further enhance computational performance. With optimal feedback terms that do not require inversion of matrices, significantly faster convergence speed and higher numerical accuracy are achieved by these correctors compared with their counterparts; however, the computational complexities are comparably low. These advantages enable nonlinear engineering problems to be solved quickly and accurately, even with rough initial guesses from elementary predictors.… More > Graphic Abstract

Fangyi Li^*, Dachang Zhu^*, Huimin Shi

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2023.031332

Abstract In time-variant reliability problems, there are a lot of uncertain variables from different sources. Therefore, it is important to consider these uncertainties in engineering. In addition, time-variant reliability problems typically involve a complex multilevel nested optimization problem, which can result in an enormous amount of computation. To this end, this paper studies the time-variant reliability evaluation of structures with stochastic and bounded uncertainties using a mixed probability and convex set model. In this method, the stochastic process of a limit-state function with mixed uncertain parameters is first discretized and then converted into a time-independent reliability problem. Further, to solve the… More >

Wei Zhong¹, Zhenfang Xin², Lihua Wang^1,*, Haiping Liu²

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2023.031271

Abstract Flash boiling atomization (FBA) is a promising approach for enhancing spray atomization, which can generate a fine and more evenly distributed spray by increasing the fuel injection temperature or reducing the ambient pressure. However, when the outlet speed of the nozzle exceeds 400 m/s, investigating high-speed flash boiling atomization (HFBA) becomes quite challenging. This difficulty arises from the involvement of many complex physical processes and the requirement for a very fine mesh in numerical simulations. In this study, an HFBA model for gasoline direct injection (GDI) is established. This model incorporates primary and secondary atomization, as well as vaporization and… More >

Afraz Hussain Majeed¹, Rashid Mahmood², Sayed M. Eldin³, Imran Saddique^4,5,*, S. Saleem⁶, Muhammad Jawad⁷

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2023.030255

Abstract This study explains the entropy process of natural convective heating in the nanofluid-saturated cavity in a heated fin and magnetic field. The temperature is constant on the Y-shaped fin, insulating the top wall while the remaining walls remain cold. All walls are subject to impermeability and non-slip conditions. The mathematical modeling of the problem is demonstrated by the continuity, momentum, and energy equations incorporating the inclined magnetic field. For elucidating the flow characteristics Finite Element Method (FEM) is implemented using stable FE pair. A hybrid fine mesh is used for discretizing the domain. Velocity and thermal plots concerning parameters are… More >

Dongyang Ou, Yongjian Ren, Congfeng Jiang^*

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2023.029987

Abstract Cloud service providers generally co-locate online services and batch jobs onto the same computer cluster, where the resources can be pooled in order to maximize data center resource utilization. Due to resource competition between batch jobs and online services, co-location frequently impairs the performance of online services. This study presents a quality of service (QoS) prediction-based scheduling model (QPSM) for co-located workloads. The performance prediction of QPSM consists of two parts: the prediction of an online service’s QoS anomaly based on XGBoost and the prediction of the completion time of an offline batch job based on random forest. On-line service… More >

Hongliang Tian, Junyuan Tian^*

CMC-Computers, Materials & Continua, Vol., , DOI:10.32604/cmc.2024.047058

Abstract The Internet of Things (IoT) access control mechanism may encounter security issues such as single point of failure and data tampering. To address these issues, a blockchain-based IoT reputation value attribute access control scheme is proposed. Firstly, writing the reputation value as an attribute into the access control policy, and then deploying the access control policy in the smart contract of the blockchain system can enable the system to provide more fine-grained access control; Secondly, storing a large amount of resources from the Internet of Things in Inter Planetary File System (IPFS) to improve system throughput; Finally, map resource access… More >

Sitara Afzal¹, Imran Ullah Khan¹, Irfan Mehmood², Jong Weon Lee^1,*

CMC-Computers, Materials & Continua, Vol., , DOI:10.32604/cmc.2023.046707

Abstract Overtaking is a crucial maneuver in road transportation that requires a clear view of the road ahead. However, limited visibility of ahead vehicles can often make it challenging for drivers to assess the safety of overtaking maneuvers, leading to accidents and fatalities. In this paper, we consider atrous convolution, a powerful tool for explicitly adjusting the field-of-view of a filter as well as controlling the resolution of feature responses generated by Deep Convolutional Neural Networks in the context of semantic image segmentation. This article explores the potential of seeing-through vehicles as a solution to enhance overtaking safety. See-through vehicles leverage… More >

Ou Ye, Xinli Wei, Zhenhua Yu^*, Yan Fu, Ying Yang

CMC-Computers, Materials & Continua, Vol., , DOI:10.32604/cmc.2023.046418

Abstract In the video captioning methods based on an encoder-decoder, limited visual features are extracted by an encoder, and a natural sentence of the video content is generated using a decoder. However, this kind of method is dependent on a single video input source and few visual labels, and there is a problem with semantic alignment between video contents and generated natural sentences, which are not suitable for accurately comprehending and describing the video contents. To address this issue, this paper proposes a video captioning method by semantic topic-guided generation. First, a 3D convolutional neural network is utilized to extract the… More >

Xinyu Hu, Defeng Kong^*, Xiyang Liu, Junwei Zhang, Daode Zhang

CMC-Computers, Materials & Continua, Vol., , DOI:10.32604/cmc.2023.046376

Abstract Printed Circuit Board (PCB) surface tiny defect detection is a difficult task in the integrated circuit industry, especially since the detection of tiny defects on PCB boards with large-size complex circuits has become one of the bottlenecks. To improve the performance of PCB surface tiny defects detection, a PCB tiny defects detection model based on an improved attention residual network (YOLOX-AttResNet) is proposed. First, the unsupervised clustering performance of the K-means algorithm is exploited to optimize the channel weights for subsequent operations by feeding the feature mapping into the SENet (Squeeze and Excitation Network) attention network; then the improved K-means-SENet… More >

Xin Fan^1,2, Shuqing Zhang^1,2,*, Kaisheng Wu^1,2, Wei Zheng^1,2, Yu Ge^1,2

CMC-Computers, Materials & Continua, Vol., , DOI:10.32604/cmc.2023.046187

Abstract Cross-Project Defect Prediction (CPDP) is a method that utilizes historical data from other source projects to train predictive models for defect prediction in the target project. However, existing CPDP methods only consider linear correlations between features (indicators) of the source and target projects. These models are not capable of evaluating non-linear correlations between features when they exist, for example, when there are differences in data distributions between the source and target projects. As a result, the performance of such CPDP models is compromised. In this paper, this paper proposes a novel CPDP method based on Synthetic Minority Oversampling Technique (SMOTE)… More >