Lyuchao Liao^1,2, Hankun Xiao^2,*, Pengqi Xing², Zhenhua Gan^1,2, Youpeng He², Jiajun Wang²

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 557-576, 2024, DOI:10.32604/cmes.2024.047452

Abstract Autonomous driving has witnessed rapid advancement; however, ensuring safe and efficient driving in intricate scenarios remains a critical challenge. In particular, traffic roundabouts bring a set of challenges to autonomous driving due to the unpredictable entry and exit of vehicles, susceptibility to traffic flow bottlenecks, and imperfect data in perceiving environmental information, rendering them a vital issue in the practical application of autonomous driving. To address the traffic challenges, this work focused on complex roundabouts with multi-lane and proposed a Perception Enhanced Deep Deterministic Policy Gradient (PE-DDPG) for Autonomous Driving in the Roundabouts. Specifically, the model incorporates an enhanced variational… More >

Chengkan Xu^1,2,4, Xiaofei Wang³, Yixuan Li², Guannan Wang^2,*, He Zhang^2,4,*

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 957-974, 2024, DOI:10.32604/cmes.2024.047327

Abstract Structural damage in heterogeneous materials typically originates from microstructures where stress concentration occurs. Therefore, evaluating the magnitude and location of localized stress distributions within microstructures under external loading is crucial. Repeating unit cells (RUCs) are commonly used to represent microstructural details and homogenize the effective response of composites. This work develops a machine learning-based micromechanics tool to accurately predict the stress distributions of extracted RUCs. The locally exact homogenization theory efficiently generates the microstructural stresses of RUCs with a wide range of parameters, including volume fraction, fiber/matrix property ratio, fiber shapes, and loading direction. Subsequently, the conditional generative adversarial network… More > Graphic Abstract

Wanbo Zhang¹, Yuqi Fan¹, Jun Zhang¹, Xu Ding^2,*, Jung Yoon Kim^3,*

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 863-885, 2024, DOI:10.32604/cmes.2024.047295

Abstract Users and edge servers are not fully mutually trusted in mobile edge computing (MEC), and hence blockchain can be introduced to provide trustable MEC. In blockchain-based MEC, each edge server functions as a node in both MEC and blockchain, processing users’ tasks and then uploading the task related information to the blockchain. That is, each edge server runs both users’ offloaded tasks and blockchain tasks simultaneously. Note that there is a trade-off between the resource allocation for MEC and blockchain tasks. Therefore, the allocation of the resources of edge servers to the blockchain and the MEC is crucial for the… More >

Wenjun Zhou^1,2, Mingzhi Yang¹, Qian Peng², Yong Peng^1,*, Kui Wang¹, Qiang Xiao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 735-755, 2024, DOI:10.32604/cmes.2024.047258

Abstract The widespread adoption of aluminum alloy electric buses, known for their energy efficiency and eco-friendliness, faces a challenge due to the aluminum frame’s susceptibility to deformation compared to steel. This issue is further exacerbated by the stringent requirements imposed by the flammability and explosiveness of batteries, necessitating robust frame protection. Our study aims to optimize the connectors of aluminum alloy bus frames, emphasizing durability, energy efficiency, and safety. This research delves into Multi-Objective Coordinated Optimization (MCO) techniques for lightweight design in aluminum alloy bus body connectors. Our goal is to enhance lightweighting, reinforce energy absorption, and improve deformation resistance in… More >

Hayder Kareem Sakran^1,2, Mohd Sharizal Abdul Aziz^1,*, Chu Yee Khor³

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 109-137, 2024, DOI:10.32604/cmes.2024.047245

Abstract The centrifugal pump is a prevalent power equipment widely used in different engineering patterns, and the impeller blade wrap angle significantly impacts its performance. A numerical investigation was conducted to analyze the influence of the blade wrap angle on flow characteristics and energy distribution of a centrifugal pump evaluated as a low specific speed with a value of 69. This study investigates six impeller models that possess varying blade wrap angles (95°, 105°, 115°, 125°, 135°, and 145°) that were created while maintaining the same volute and other geometrical characteristics. The investigation of energy loss was conducted to evaluate the… More > Graphic Abstract

Wenxiang Dong, H. Vicky Zhao^*

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 139-170, 2024, DOI:10.32604/cmes.2024.047156

Abstract Understanding and modeling individuals’ behaviors during epidemics is crucial for effective epidemic control. However, existing research ignores the impact of users’ irrationality on decision-making in the epidemic. Meanwhile, existing disease control methods often assume users’ full compliance with measures like mandatory isolation, which does not align with the actual situation. To address these issues, this paper proposes a prospect theory-based framework to model users’ decision-making process in epidemics and analyzes how irrationality affects individuals’ behaviors and epidemic dynamics. According to the analysis results, irrationality tends to prompt conservative behaviors when the infection risk is low but encourages risk-seeking behaviors when… More >

Junjie Zhao, Diyuan Li^*, Jingtai Jiang, Pingkuang Luo

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 275-304, 2024, DOI:10.32604/cmes.2024.046960

Abstract Traditional laboratory tests for measuring rock uniaxial compressive strength (UCS) are tedious and time-consuming. There is a pressing need for more effective methods to determine rock UCS, especially in deep mining environments under high in-situ stress. Thus, this study aims to develop an advanced model for predicting the UCS of rock material in deep mining environments by combining three boosting-based machine learning methods with four optimization algorithms. For this purpose, the Lead-Zinc mine in Southwest China is considered as the case study. Rock density, P-wave velocity, and point load strength index are used as input variables, and UCS is regarded… More > Graphic Abstract

Huaiguang Wu, Yibo Peng, Yaqiong He^*, Jinlin Fan

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 77-108, 2024, DOI:10.32604/cmes.2024.046758

Abstract In recent years, the number of smart contracts deployed on blockchain has exploded. However, the issue of vulnerability has caused incalculable losses. Due to the irreversible and immutability of smart contracts, vulnerability detection has become particularly important. With the popular use of neural network model, there has been a growing utilization of deep learning-based methods and tools for the identification of vulnerabilities within smart contracts. This paper commences by providing a succinct overview of prevalent categories of vulnerabilities found in smart contracts. Subsequently, it categorizes and presents an overview of contemporary deep learning-based tools developed for smart contract detection. These… More > Graphic Abstract

Xianghong Cao, Xinyu Wang, Xin Geng^*, Donghui Wu, Houru An

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 385-408, 2024, DOI:10.32604/cmes.2024.046752

Abstract This study proposes a pose estimation-convolutional neural network-bidirectional gated recurrent unit (PSE-CNN-BiGRU) fusion model for human posture recognition to address low accuracy issues in abnormal posture recognition due to the loss of some feature information and the deterioration of comprehensive performance in model detection in complex home environments. Firstly, the deep convolutional network is integrated with the Mediapipe framework to extract high-precision, multi-dimensional information from the key points of the human skeleton, thereby obtaining a human posture feature set. Thereafter, a double-layer BiGRU algorithm is utilized to extract multi-layer, bidirectional temporal features from the human posture feature set, and a… More >

Dongsheng Jia, Yingjie Xu^*, Liangdi Wang, Jihong Zhu, Weihong Zhang

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 171-199, 2024, DOI:10.32604/cmes.2024.046703

Abstract The abalone shell, a composite material whose cross-section is composed of inorganic and organic layers, has high strength and toughness. Inspired by the abalone shell, several multi-layer composite plates with different layer sequences and thicknesses are studied as bullet-proof material in this paper. To investigate the ballistic performance of this multi-layer structure, the complete characterization model and related material parameters of large deformation, failure and fracture of Al₂O₃ ceramics and Carbon Fiber Reinforced Polymer (CFRP) are studied. Then, 3D finite element models of the proposed composite plates with different layer sequences and thicknesses impacted by a 12.7 mm armor-piercing incendiary… More >