V. Sudha^1,*, T. R. Ganesh Babu², N. Vikram¹, R. Raja²

Molecular & Cellular Biomechanics, Vol.18, No.3, pp. 139-145, 2021, DOI:10.32604/mcb.2021.016056

Abstract Diabetic Retinopathy (DR) is a disease that occurs in the eye which results in blindness as it passes to proliferative stage. Diabetes can significantly result in symptoms like blurring of vision, kidney failure, nervous damage. Hence it has become necessary to identify retinal damage that occurs in diabetic eye due to raised glucose level in its initial stage itself. Hence automated detection of anamoly has become very essential. The appearance of crimson and yellow lesions is considered as the earliest symptoms of DR which are called as hemorrhages and exudates. If DR is analysed at initial stage, blindness does not… More >

Jianming Lu^1,*, Liangliang Xiang², Huw Wiltshire³

Molecular & Cellular Biomechanics, Vol.18, No.3, pp. 123-129, 2021, DOI:10.32604/mcb.2021.015993

Abstract Surface topography is a no-invasive, radiation-free method that can measure sufficient surface spine parameters by the structured back surface scan and a precise anatomical landmarks recognition. The purpose of the present study was to measure the spine shape parameter changes within the day via the DIERS Formetric 4D analysis system. Ten male healthy volunteers were recruited to participate in the experiment. All participants were sedentary people with the average sitting time during study or work t ≥ 8 h and without any back disease in the past six months. Data were analyzed by one-way ANOVA, which set time points within… More >

Salome Kiparoidze^1,*, Nino Karumidze², Ekaterine Bakuradze¹, Irina Modebadze¹, Levan Rusishvili¹, Dimitri Kordzaia², Diana Dzidziguri¹

Molecular & Cellular Biomechanics, Vol.18, No.3, pp. 131-138, 2021, DOI:10.32604/mcb.2021.015596

Abstract According to the literature, different mechanisms and kinetics proceeding of regenerative growth has been established using the basic models of liver regeneration (after resection or chemically induced). Hence, in order to determine general regularities of the adaptive-compensatory processes in various pathological conditions, the processes taking place in the cholestatic liver of adult white rats during the first four days after common bile duct ligation have been studied. It has been shown that in cholestatic liver, compensatory-adaptive processes take place with different kinetics compared to those after resection. In particular, in response to the increased functional load caused by destructive processes… More >

Dan Wu¹, Yanbo Che¹, Wei Li^2,*, Wei He³, Dongyi Li⁴

Energy Engineering, Vol.118, No.5, pp. 1549-1564, 2021, DOI:10.32604/EE.2021.014818

Abstract With the significant progress of the “coal to electricity” project, the electric kiln equipment began to be connected to the distribution network on a large scale, which caused power quality problems such as low voltage, high harmonic distortion rate, and high reactive power loss. This paper proposes a two-stage power grid comprehensive resource optimization configuration model. A multi-objective optimization solution based on the joint simulation platform of Matlab and OpenDSS is developed. The solution aims to control harmonics and optimize reactive power. In the first stage, a multi-objective optimization model is established to minimize the active network loss, voltage deviation,… More >

S. Narayan^1,*, M. U. Kaisan², Shitu Abubakar², Faisal O. Mahroogi³, Vipul Gupta⁴

Sound & Vibration, Vol.55, No.3, pp. 221-234, 2021, DOI:10.32604/sv.2021.016539

Abstract The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection… More >

Al Munawir¹, Azma Putra^2,*, Iwan Prasetiyo³, Wan Mohd Farid Wan Mohamad², Safarudin Herawan⁴

Sound & Vibration, Vol.55, No.3, pp. 203-219, 2021, DOI:10.32604/sv.2021.015938

Abstract Statistical Energy Analysis (SEA) is a well-known method to analyze the flow of acoustic and vibration energy in a complex structure. This study investigates the application of the corrected SEA model in a non-reverberant acoustic space where the direct field component from the sound source dominates the total sound field rather than a diffuse field in a reverberant space which the classical SEA model assumption is based on. A corrected SEA model is proposed where the direct field component in the energy is removed and the power injected in the subsystem considers only the remaining power after the loss at… More >

Kenneth R. Podolak^*, Vihan A.W. Wickramasinghe, Gareth A. Mansfield, Alex M. Tuller

Sound & Vibration, Vol.55, No.3, pp. 235-240, 2021, DOI:10.32604/sv.2021.015008

Abstract Ernst Chladni is called the father of acoustics for his work, which includes investigating patterns formed by vibrating plates. Understanding these patterns helps research involving standing waves and other harmonic behaviors, including studies of single electron orbits in atoms. Our experiment vibrates circular plates which result in well-known patterns. Alternatively to traditional experiments that used sand or salt, we use magnetic materials, namely iron filings and nickel powder. We then manipulate the patterns by applying a localized external magnetic field to one of the rings that moves a segment of the magnetic material in that ring to the next inner… More >

Y. A. Amer¹, Taher A. Bahnasy^2,*

Sound & Vibration, Vol.55, No.3, pp. 191-201, 2021, DOI:10.32604/sv.2021.014358

Abstract An externally excited Duffing oscillator under feedback control is discussed and analyzed under the worst resonance case. Multiple time scales method is applied for this system to find analytic solution with the existence and nonexistence of the time delay on control loop. An appropriate stability analysis is also performed and appropriate choices for the feedback gains and the time delay are found in order to reduce the amplitude peak. Different response curves are involved to show and compare controller effects. In addition, analytic solutions are compared with numerical approximation solutions using Rung-Kutta method of fourth order. More >

Hulya Durur¹, Asıf Yokuş², Doğan Kaya³, Hijaz Ahmad^4,*

Sound & Vibration, Vol.55, No.3, pp. 241-251, 2021, DOI:10.32604/sv.2021.014157

Abstract In this paper, sub equation and expansion methods are proposed to construct exact solutions of a nonlinear longitudinal wave equation (LWE) in a magneto-electro-elastic circular rod. The proposed methods have been used to construct hyperbolic, rational, dark soliton and trigonometric solutions of the LWE in the magneto-electro-elastic circular rod. Arbitrary values are given to the parameters in the solutions obtained. 3D, 2D and contour graphs are presented with the help of a computer package program. Solutions attained by symbolic calculations revealed that these methods are effective, reliable and simple mathematical tool for finding solutions of nonlinear evolution equations arising in… More >

Deepak Kumar Singh^*

Sound & Vibration, Vol.55, No.3, pp. 253-262, 2021, DOI:10.32604/sv.2021.011627

Abstract The analysis of spliced column has been carried out to detect optimum location of providing splices in the column. In the present work, static and dynamic (free vibration) analyses of spliced column have been done by randomising the location of splicing. A symmetrical four storey steel framed building has been modelled, analysed and designed for loads (dead, live and earthquake loads) recommended by Indian Codal provisions using Staad.Pro. The critical column at each floor level is identified based on axial force (AF), bending moment (BM) and shear force (SF). The total 16 models of spliced columns have been designed and… More >