Eglė Malachovskienė^1,*, Danguolė Bridžiuvienė¹, Jolita Ostrauskaitė², Justina Vaičekauskaitė², Gailė Žalūdienė³

Journal of Renewable Materials, Vol.11, No.3, pp. 1255-1269, 2023, DOI:10.32604/jrm.2022.023574 - 31 October 2022

Abstract The biodegradation of polymeric biocomposites formed from epoxidized linseed oil and various types of fillers (pine needles, pine bark, grain mill waste, rapeseed cake) and a control sample without filler was studied during 180 days of exposure to two types of forest soil: deciduous and coniferous. The weight loss, morphological, and structural changes of polymer composites were noticed after 180 days of the soil burial test. The greatest weight loss of all tested samples was observed in coniferous forest soil (41.8%–63.2%), while in deciduous forest soil, it ranged between 37.7% and 42.3%. The most significant… More >

Mostafa Amiri¹, Farzad Hatami^2,*, Emadaldin Mohammadi Golafshani³

Journal of Renewable Materials, Vol.10, No.8, pp. 2155-2177, 2022, DOI:10.32604/jrm.2022.019726 - 25 April 2022

Abstract In this experimental study, the impact of Portland cement replacement by ground granulated blast furnace slag (GGBFS) and micronized rubber powder (MRP) on the compressive, flexural, tensile strengths, and rapid chloride migration test (RCMT) of concrete were assessed. In this study, samples with different binder content and water to binder ratios, including the MRP with the substitution levels of 0%, 2.5% and 5%, and the GGBFS with the substitution ratios of 0%, 20% and 40% by weight of Portland cement were made. According to the results, in the samples containing slag and rubber powder in… More > Graphic Abstract