Marwah Subhi Attallah, Reem Alaa Mohammed^*, Ruaa Haitham Abdel-Rahim

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.10, pp. 2449-2469, 2023, DOI:10.32604/fdmp.2023.027750 - 25 June 2023

Abstract This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells, walnut shells, and carbon fibers dispersed in a polyester matrix. MINITAB (L16) Taguchi experiments were used to determine the optimal combination of parameters. In particular, an erosion device consisting of a motor with a constant flow rate of 45 L/min, a pump with a diameter of 40 mm, a nozzle with a diameter of 5 mm, and a tank made of “perspex glass” 55 cm long, 30 cm tall, and 25 cm wide was used. The tests were conducted by… More > Graphic Abstract

Yueqiang Yu¹, Tingang Ma¹, Suling Wang^1,*, Minzheng Jiang¹, Yanling Guo^2,3, Ting Jiang^1,*, Shuaiqi Huang¹, Ziming Zheng¹, Bo Yan¹, Jiyuan Lv¹

Journal of Renewable Materials, Vol.11, No.1, pp. 333-347, 2023, DOI:10.32604/jrm.2022.022296 - 10 August 2022

Abstract A calculation model of stress field in laser additive manufacturing of walnut shell composite powder (walnut shell/Co-PES powder) was established. The DFLUX subroutine was used to implement the moveable application of a double ellipsoid heat source by considering the mechanical properties varying with temperature. The stress field was simulated by the sequential coupling method, and the experimental results were in good accordance with the simulation results. In addition, the distribution and variation of stress and strain field were obtained in the process of laser additive manufacturing of walnut shell composite powder. The displacement of laser More > Graphic Abstract

Yueqiang Yu¹, Suling Wang^1,*, Minzheng Jiang¹, Yanling Guo^2,3, Ting Jiang^1,*

Journal of Renewable Materials, Vol.9, No.2, pp. 351-364, 2021, DOI:10.32604/jrm.2021.012885 - 15 December 2020

Abstract In order to enhance the strength of sustainable walnut shell/Co-PES (WSPC) sintered parts, wax-filtrated post-treatment was carried out. The effects of treating fluid temperature, preheating time and immersion time on the bending strength of WSPC wax-filtrated parts were analyzed by single factor analysis method. To obtain an accurate model for predicting the bending strength of the WSPC wax-filtrated part, the experiments were involved by using Box-Behnken design (BBD). Main parameters, such as treating fluid temperature, preheating time and immersion time, and their interactive effects were analyzed through analysis of variance (ANOVA) and graphical contours. The… More >