Amnart Boonloi^a, Withada Jedsadaratanachai^b,*

Frontiers in Heat and Mass Transfer, Vol.18, pp. 1-15, 2022, DOI:10.5098/hmt.18.20

Abstract Numerical analysis of fluid flow mechanism and heat transfer in a heat exchanger duct (HXD) with dual-inclined baffles (DIB) are reported. Three DIB types are examined: 1. “Type A” is located at the center of the HXD, 2. “Type B” is located on the upper-lower duct walls (as an orifice) and 3. “Type C” is a combination of the type A and B (as double orifices). The impacts of the ratio of DIB heights (b) to the square duct height (H; b/H) on increased heat transfer and friction loss are analyzed. Laminar flow (Re =… More >

Yan-Juan Zhao^a,*, Yu-Liang Zhang^b,† , Chen-Liang Zhang^b

Frontiers in Heat and Mass Transfer, Vol.17, pp. 1-7, 2021, DOI:10.5098/hmt.17.3

Abstract Vortex flowmeter adopts advanced micro processing technology, which has the advantages of strong function, wide flow range, simple operation and maintenance, convenient installation and use. It is widely used in petroleum, chemical industry, electric power, metallurgy, urban gas supply and other industries to measure various gas flows. In order to study the characteristics of the inner flow passage of the vortex flowmeter and reach the normal working standard of the vortex flowmeter, this paper uses CFX to calculate the turbulent kinetic energy, eddy viscosity and flow velocity of the inner flow passage of the vortex… More >

Qingzhuo Chi¹, Huimin Chen¹, Lizhong Mu^1,*, Ying He¹, Yong Luan²

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.4, pp. 721-743, 2021, DOI:10.32604/fdmp.2021.015200 - 17 May 2021

Abstract Type A aortic dissection (AD) is one of the most serious cardiovascular diseases, whose risk predictors are controversial. The purpose of this research was to investigate how elongation accompanied by dilation of the ascending aorta (AAo) affects the relevant haemodynamic characteristics using image-based computational models. Five elongated AAos with different levels of dilation have been reconstructed based on the centerlines data of an elderly and an AD patient. Numerical simulations have been performed assuming an inflow waveform and a Windkessel model with three elements for all outflow boundaries. The numerical results have revealed that the More >

G.R. Baker¹

CMES-Computer Modeling in Engineering & Sciences, Vol.96, No.2, pp. 91-101, 2013, DOI:10.3970/cmes.2013.096.091

Abstract A vortex patch is a bounded region of uniform vorticity in twodimensional, incompressible, inviscid fluid flow. The streamfunction satisfies the Poisson equation with the vorticity acting as a source term. The standard formulation is to write the streamfunction as a convolution of the vorticity with the twodimensional free-space Greens function. A simple application of Greens theorem converts the area integral to a boundary integral. Numerical methods must then account for the singular nature of the boundary integral, and high accuracy is difficult when filamentation takes place, that is, when long, very thin filaments of vorticity… More >

Sung-Eun Kim¹, Shin Hyung Rhee²

CMES-Computer Modeling in Engineering & Sciences, Vol.62, No.3, pp. 291-310, 2010, DOI:10.3970/cmes.2010.062.291

Abstract Turbulent flow past a finite wing has been computed to assess the fidelity of modern computational fluid dynamics in predicting tip vortex flows. The efficacy of a feature-adaptive local mesh refinement to resolve the steep gradients in the flow field near the tip vortex is demonstrated. The impact of turbulence modeling is evaluated using several popular eddy viscosity models and a Reynolds stress transport model. The results indicate that the combination of a computational mesh with an adequate resolution, high-order spatial discretization scheme along with the use of advanced turbulence models can predict tip vortex More >