A. Asbayou^1,*, G.P. Smestad², I. Ismail¹, A. Soussi¹, A. Elfanaoui¹, L. Bouhouch¹, A. Ihlal¹

Energy Engineering, Vol.121, No.2, pp. 243-258, 2024, DOI:10.32604/ee.2024.046409 - 25 January 2024

Abstract In this paper, a detailed model of a photovoltaic (PV) panel is used to study the accumulation of dust on solar panels. The presence of dust diminishes the incident light intensity penetrating the panel’s cover glass, as it increases the reflection of light by particles. This phenomenon, commonly known as the “soiling effect”, presents a significant challenge to PV systems on a global scale. Two basic models of the equivalent circuits of a solar cell can be found, namely the single-diode model and the two-diode models. The limitation of efficiency data in manufacturers’ datasheets has More > Graphic Abstract

Chunhua Liu¹, Dongfang Zou¹, Qinqin Huang¹, Shang Li², Xia Zheng¹, Xingong Li^1,*

Journal of Renewable Materials, Vol.11, No.10, pp. 3613-3624, 2023, DOI:10.32604/jrm.2023.028111 - 10 August 2023

Abstract The residual resources of ramie fiber-based textile products were used as raw materials. Ramie fiber felt (RF) was modified by NaClO₂ aqueous solution and then impregnated with water-based epoxy resin (WER). RF/WER transparent composite materials were prepared by lamination hot pressing process. The composite materials’color difference, transmittance, haze, density, water absorption, and mechanical properties were determined to assess the effects of NaClO₂ treatment and the number of ramie fiber layers on the properties of the prepared composites. The results showed significantly improved optical and mechanical properties of the RF/WER transparent composites after NaClO₂ treatment. With the increase More > Graphic Abstract

Abdellah Asbayou^*, Ahmed Ihlal, Ismail Isknan, Ahmed Soussi, Lahoussine Bouhouch

Journal of Renewable Materials, Vol.11, No.5, pp. 2249-2264, 2023, DOI:10.32604/jrm.2023.025456 - 13 February 2023

Abstract Experiments of soiling effects on the performances of a PV panel have been performed using dust collected from two sites in the region of Agadir-Morocco. The optical transmittance of the front glass was found to depend on the nature and density of dust. The nature of dust was studied by means of scanning electron microscopy and energy dispersive x-ray spectroscopy. It was found that the granulometry of dust particles depends on the study area. For a dust density of around 20 g/m², the maximum power Pmax of the solar panel decreases drastically from 30 to More > Graphic Abstract