Zhimin Chen¹, Bo Yu², Yujie Chen^2,*, Xufei Yang², Jianqin Zhu³, Wei Lu⁴, Weihua Cai^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.29, No.4, pp. 1-1, 2024, DOI:10.32604/icces.2024.012525

Abstract The laminated cooling configuration offers significant advantages in enhancing the cooling effectiveness, prolonging the service life, and enhancing the reliability of turbine blades. It stands as one of the key development directions for the cooling structure of next-generation turbine blades. Numerous scholars have conducted extensive research on laminated cooling, which has been widely applied in the aviation industry. With the continuous rise in turbine inlet temperatures, there is a growing need to further enhance the cooling performance of the blades. Therefore, this study proposes the utilization of a shaped film hole to enhance the overall… More >

Tao Bian¹, Xin Shen², Jun Feng¹, Bing Wang^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.3, pp. 615-628, 2021, DOI:10.32604/fdmp.2021.014902 - 29 April 2021

Abstract In turbomachinery, strong secondary flow can produce significant losses of total pressure near the endwall and reduce the efficiency of the considered turbomachine. In this study, splitters located at different positions with respect to the main blade have been used to reduce such losses and improve the efficiency of the outlet guide vane (OGV). Three different relative positions have been considered assuming a NACA 65-010 profile for both the main blade and the splitter. The numerical results indicate that splitters can effectively reduce the total pressure loss by suppressing the secondary flow around the main More >

Yukun Lv, Jiaxi Yang, Jiawen Wang^*, Runcheng Zhang, Shuang Yang, Wentao Li

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.6, pp. 1203-1217, 2020, DOI:10.32604/fdmp.2020.010489 - 17 December 2020

Abstract Aiming at the problem that the total pressure loss of the flue of the electric precipitator of the 350 MW unit of a power plant to the inlet of the draft fan is too large, the numerical simulation software Fluent and the standard k-ε model was used to simulate the flue, the results show that the main part of the flue mean total pressure loss is derived from the confluence header and elbow. In order to reduce the loss and consider the cost of transformation, the concept of twodimensional feature surface is established, gradually proposed three More >