Ahmed Manguri^1,2,3,*, Hogr Hassan³, Najmadeen Saeed^3,4, Robert Jankowski¹

CMES-Computer Modeling in Engineering & Sciences, Vol.142, No.2, pp. 933-971, 2025, DOI:10.32604/cmes.2025.059249 - 27 January 2025

Abstract The optimization of civil engineering structures is critical for enhancing structural performance and material efficiency in engineering applications. Structural optimization approaches seek to determine the optimal design, by considering material performance, cost, and structural safety. The design approaches aim to reduce the built environment’s energy use and carbon emissions. This comprehensive review examines optimization techniques, including size, shape, topology, and multi-objective approaches, by integrating these methodologies. The trends and advancements that contribute to developing more efficient, cost-effective, and reliable structural designs were identified. The review also discusses emerging technologies, such as machine learning applications with More >

Xuesong Li¹, Shuting Wang^1,2, Nianmeng Luo^1,*, Aodi Yang¹, Xing Yuan¹, Xianda Xie^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.142, No.2, pp. 1481-1514, 2025, DOI:10.32604/cmes.2024.058798 - 27 January 2025

Abstract Due to the high-order B-spline basis functions utilized in isogeometric analysis (IGA) and the repeatedly updating global stiffness matrix of topology optimization, Isogeometric topology optimization (ITO) intrinsically suffers from the computationally demanding process. In this work, we address the efficiency problem existing in the assembling stiffness matrix and sensitivity analysis using Bėzier element stiffness mapping. The Element-wise and Interaction-wise parallel computing frameworks for updating the global stiffness matrix are proposed for ITO with Bėzier element stiffness mapping, which differs from these ones with the traditional Gaussian integrals utilized. Since the explicit stiffness computation formula derived… More >

Chen Wang^1,*, Pan Wang¹, Jiazhao Huang¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.31, No.1, pp. 1-2, 2024, DOI:10.32604/icces.2024.011846

Abstract Industry 4.0 promises to bring significant changes to general additive manufacturing (AM) systems, ushered by the incorporation of digital twin development to capture high-volume data in an integrated and automated way [1]. During this transformation, it is required to develop advanced methods to solve main problems in the large-scale industrial use of AM technology. One of the challenges is how to eliminate or mitigate the structural distortion due to thermal effect during AM processes [2-4]. To reduce the level of distortion, a general hands-on approach is to compensate the geometry based on physical measurements of… More >

Nguyen Long Giang¹, Tran Thanh Dai², Le Hoang Son³, Tran Thi Ngan⁴, Nguyen Nhu Son¹, Cu Nguyen Giap^5,*

CMC-Computers, Materials & Continua, Vol.81, No.2, pp. 3097-3124, 2024, DOI:10.32604/cmc.2024.057383 - 18 November 2024

Abstract Attribute reduction through the combined approach of Rough Sets (RS) and algebraic topology is an open research topic with significant potential for applications. Several research works have introduced a strong relationship between RS and topology spaces for the attribute reduction problem. However, the mentioned recent methods followed a strategy to construct a new measure for attribute selection. Meanwhile, the strategy for searching for the reduct is still to select each attribute and gradually add it to the reduct. Consequently, those methods tended to be inefficient for high-dimensional datasets. To overcome these challenges, we use the… More >

Jingbo Zhang¹, Qiong Wu^1,*, Pingyi Fan², Qiang Fan³

CMC-Computers, Materials & Continua, Vol.81, No.2, pp. 1953-1998, 2024, DOI:10.32604/cmc.2024.057006 - 18 November 2024

Abstract Federated Edge Learning (FEL), an emerging distributed Machine Learning (ML) paradigm, enables model training in a distributed environment while ensuring user privacy by using physical separation for each user’s data. However, with the development of complex application scenarios such as the Internet of Things (IoT) and Smart Earth, the conventional resource allocation schemes can no longer effectively support these growing computational and communication demands. Therefore, joint resource optimization may be the key solution to the scaling problem. This paper simultaneously addresses the multifaceted challenges of computation and communication, with the growing multiple resource demands. We… More >

Zeyu Deng¹, Yuan Liang^1,*, Gengdong Cheng¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.30, No.4, pp. 1-1, 2024, DOI:10.32604/icces.2024.012504

Abstract Compared to single-material optimization, topology optimization of multi-material structures offers a larger design space. It also requires efficient material selection methods to provide guidance for designers. The predominant methods are based on interpolation schemes, which introduce order-dependence issues during the optimization process. This means the sequence in which materials are arranged can significantly impact the optimization outcomes and may lead to notable issues with material gradation. This paper identifies the mathematical essence of multi-material topology optimization as a nonlinear multi-valued integer programming problem. In this paper, we propose a novel stochastic discrete steepest descent multi-valued More >

Yifan Guo^1,3, Jikai Liu², Yongsheng Ma^3,*, Rafiq Ahmad^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.30, No.2, pp. 1-2, 2024, DOI:10.32604/icces.2024.011177

Abstract Multi-axis additive manufacturing (AM) is an advanced manufacturing method with advantages over traditional 3-axis additive manufacturing. A formidable challenge in AM is widely acknowledged in utilizing support materials, a process characterized by temporal and material resource consumption. Extensive research endeavors have been dedicated to mitigating or eliminating reliance on support materials, particularly emphasizing pioneering self-supporting design strategies. Empirical investigations reveal that when the overhang angle of a structure surpasses a predefined threshold (typically 45°), support structures may become dispensable for assisted printing. In traditional 3-axis AM systems, achieving support-free printing for structures exhibiting overhang angles… More >

Huilin Ren^1,2, David W. Rosen², Yi Xiong^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.30, No.1, pp. 1-1, 2024, DOI:10.32604/icces.2024.010920

Abstract The advancement of continuous fiber-reinforced polymer additive manufacturing (CFRP-AM) enables the fabrication of structures with complex geometries and superior properties. However, current design methodologies consider toolpath design and structure optimization as separate stages, with toolpath design typically serving as a post-processing step after structure optimization. This sequential methodology limits the full exploitation of fiber reinforced polymer composites (FRPC) capabilities, particularly in achieving optimal structural integrity and manufacturability. In this paper, a manufacturing-oriented method is proposed for designing continuous FRPC structures, in which the structural layout and continuous fiber toolpaths are simultaneously optimized. The integrated design… More >

Qingrong Zeng, Xiaochen Liu, Xuefeng Zhu^*, Xiangkui Zhang, Ping Hu

CMES-Computer Modeling in Engineering & Sciences, Vol.141, No.3, pp. 2065-2085, 2024, DOI:10.32604/cmes.2024.052620 - 31 October 2024

Abstract Traditional topology optimization methods often suffer from the “dimension curse” problem, wherein the computation time increases exponentially with the degrees of freedom in the background grid. Overcoming this challenge, we introduce a real-time topology optimization approach leveraging Conditional Generative Adversarial Networks with Gradient Penalty (CGAN-GP). This innovative method allows for nearly instantaneous prediction of optimized structures. Given a specific boundary condition, the network can produce a unique optimized structure in a one-to-one manner. The process begins by establishing a dataset using simulation data generated through the Solid Isotropic Material with Penalization (SIMP) method. Subsequently, we More >

Jiayu Chen¹, Yingchun Bai^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.29, No.3, pp. 1-2, 2024, DOI:10.32604/icces.2024.011393

Abstract Mega-casting techniques are widely used to manufacture large piece of thin-walled structures for vehicle body in Automotive industries, especially with the rapid growing electric vehicle market. Topology optimization is effective design method to reach higher mechanical performance yet lightweight potential for casting structures [1-3]. Most of existing works is focused on geometric-type casting constraints such as drawn angle, partion line, undercut, and enclose holes. However, the challenges in mega-casting arise from the complexities in the casting process such as filling and solidification, and the corresponding defects have larger influences on the structural performances [4-6]. Partial… More >