Xueyan Lin^1,#, Mingtao Wu^2,#, Guodong Li^1,*, Nan Guo³, Lidan Mei¹

Structural Durability & Health Monitoring, Vol.18, No.6, pp. 805-833, 2024, DOI:10.32604/sdhm.2024.051033

Abstract In this paper, a new type of bamboo scrimber column embedded with steel bars (rebars) was proposed, and the compression performance was improved by pre-embedding rebars during the preparation of the columns. The effects of the slenderness ratio and the reinforcement ratio on the axial compression performance of reinforced bamboo scrimber columns were studied by axial compression tests on 28 specimens. The results showed that the increase in the slenderness ratio had a significant negative effect on the axial compression performance of the columns. When the slenderness ratio increased from 19.63 to 51.96, the failure… More >

Yuhan Zhou^1,2,#, Xiaojun Li^3,#, Yanhui Xiang^1,2,4,*

International Journal of Mental Health Promotion, Vol.26, No.1, pp. 31-38, 2024, DOI:10.32604/ijmhp.2023.043167

Abstract Fathers play an important role in children’s development throughout their lives, and Father-Love Absence (FLA) leads to more behavioral problems, including Non-Suicidal Self-Injury (NSSI). However, there has been no research on the relationship between FLA and NSSI and its influencing mechanism. This study is based on Nock’s integrated theoretical model of NSSI, aiming to explore the influence of FLA on NSSI and further investigate the mechanism of Subjective Vitality (SV) and Forgiveness (FORG). This study recruited 1795 adolescents in central China to complete four scales, including Father-Love Absence Scale (FLAS), The Subjective Vitality Scale (SVS), More >

Bingzhu Wang^1,*, Xiangrui Ye^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.2, pp. 1401-1425, 2024, DOI:10.32604/cmes.2024.047364

Abstract A novel three-dimensional-fiber reinforced soft pneumatic actuator (3D-FRSPA) inspired by crab claw and human hand structure that can bend and deform independently in each segment is proposed. It has an omni-directional bending configuration, and the fibers twined symmetrically on both sides to improve the bending performance of FRSPA. In this paper, the static and kinematic analysis of 3D-FRSPA are carried out in detail. The effects of fiber, pneumatic chamber and segment length, and circular air chamber radius of 3D-FRSPA on the mechanical performance of the actuator are discussed, respectively. The soft mobile robot composed of More >

Shangting Miao¹, Yang Li^2,*, Quan Pan²

CMC-Computers, Materials & Continua, Vol.76, No.3, pp. 2745-2762, 2023, DOI:10.32604/cmc.2023.037257

Abstract A space called Unmanned Aerial Vehicle (UAV) cyber is a new environment where UAV, Ground Control Station (GCS) and business processes are integrated. Denial of service (DoS) attack is a standard network attack method, especially suitable for attacking the UAV cyber. It is a robust security risk for UAV cyber and has recently become an active research area. Game theory is typically used to simulate the existing offensive and defensive mechanisms for DoS attacks in a traditional network. In addition, the honeypot, an effective security vulnerability defense mechanism, has not been widely adopted or modeled… More >

Xinliang Li¹, Jiangang Guo^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-2, 2023, DOI:10.32604/icces.2023.09484

Abstract As the first two-dimensional (2D) material discovered in experiments, graphene has attracted increasing attention from the scientific community [1]. And it possesses many superb mechanical, electronic and optical properties [2-4] due to its unique atomic structure. Its Young’s modulus and failure strength are 1TPa and 130GPa [5], respectively. Thus, 2D graphene has been extensively used in nanosensors and nanocomposites [6-8], etc. In order to fabricate graphene-based devices which inherit outstanding properties of 2D graphene, materials scientists are trying to use 2D graphene as building blocks to construct three-dimensional (3D) carbon nanomaterials, such as 3D graphene… More >

Yifan Wang¹, Tao Wang^1,*, Xuan Ye^2,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010058

Abstract Rod occasionally drops and impacts on a substrate, which can induce drastic vibration within the rod. Acquaintance with the mechanical and motional responses helps to evaluate the structure. In this study, the vertical impact of a slender flat-ended 316 stainless steel rod on a rigid flat was investigated. The rod was basically elastic despite minute plastic dissipation, which accounted for around 0.11% of the total energy, probably due to the convergence of the incident stress waves. Theoretical models describing the longitudinal vibration of the rod was established respectively using the contact-impact force and the displacement… More >

Yanbin Wang^1,2, Deli Gao¹, Jun Fang¹

CMC-Computers, Materials & Continua, Vol.48, No.1, pp. 25-42, 2015, DOI:10.3970/cmc.2015.048.025

Abstract In this paper, the buckling and collapse analysis of offshore pipeline under combined tension, bending moment, and external pressure has been presented with theoretical analysis and FE (finite element) simulation method respectively. Based on the model initially proposed by Kyriakides, a 2-D theoretical model has been further developed. To verify the correctness and accuracy of the model proposed in this paper, numerical simulations have been conducted with 3-D FE model using ABAQUS software. Good consistency has been shown between the calculation results which validate the availability of the theoretical analysis. On this basis, the influence More >

Zichun Yang^1,2,3, Gaohui Su^1,4, Fengrui Sun¹

CMC-Computers, Materials & Continua, Vol.36, No.3, pp. 271-292, 2013, DOI:10.3970/cmc.2013.036.271

Abstract In this paper, we investigate the radiative properties and the effective thermal conductivity (ETC) of the opacified silica aerogel by theoretical method. The radiative properties of the opacified silica aerogel are obtained by the modified Mie Scattering Theory that is used for particle scattering in absorbing medium. The modified gamma distribution is used to take account of the non-uniformity of the particle size. The solid thermal conductivity of the composite material is obtained by considering the scale effect of the particles. Based on these calculated thermophysical properties the coupled heat conduction and radiation through the More >

Renpeng Chen, Linggang kong, Lvjun Tang, Yunmin Chen

The International Conference on Computational & Experimental Engineering and Sciences, Vol.20, No.4, pp. 99-100, 2011, DOI:10.3970/icces.2011.020.099

Abstract Face stability is critical in the underground tunneling. In this report, large-scale model tests on the face stability of shallow tunnels for various cover depths (C/D = 0.5, 1, and 2) in dry sandy ground were firstly introduced. Then, a series of three-dimensional DEM models were built to simulated the process of tunnel face failure. The results of the model tests and DEM simulations reveal that a chimney like failure zone appears during the tunnel face failure. It was founded that with the increase of the horizontal displacement of the tunnel face, the support pressure More >

Z. Y. Yan^1,2, J. Zhang¹, W. Ye¹, T.X. Yu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.55, No.1, pp. 33-60, 2010, DOI:10.3970/cmes.2010.055.033

Abstract An 3-D precorrected-FFT accelerated BEM approach for the linear elastic analysis of porous solids with randomly distributed pores of arbitrary shape and size is described in this paper. Both the upper bound and the lower bound of elastic properties of solids with spherical pores are obtained using the developed fast BEM code. Effects of porosity and pore shape on the elastic properties are investigated. The performance of several theoretical models is evaluated by comparing the theoretical predictions with the numerical results. It is found that for porous solids with spherical pores, the performances of the More >