Shehab Khan Noor¹, Arif Mawardi Ismail¹, Mohd Najib Mohd Yasin^1,*, Mohamed Nasrun Osman¹, Thennarasan Sabapathy¹, Shakhirul Mat Salleh², Ping Jack Soh³, Ali Hanafiah Rambe⁴, Nurulazlina Ramli⁵

Computer Systems Science and Engineering, Vol.47, No.1, pp. 537-551, 2023, DOI:10.32604/csse.2023.037381 - 26 May 2023

Abstract This paper presents a flexible and wearable textile array antenna designed to generate Orbital Angular Momentum (OAM) waves with Mode +2 at 3.5 GHz (3.4 to 3.6 GHz) of the sub-6 GHz fifth-generation (5G) New Radio (NR) band. The proposed antenna is based on a uniform circular array of eight microstrip patch antennas on a felt textile substrate. In contrast to previous works involving the use of rigid substrates to generate OAM waves, this work explored the use of flexible substrates to generate OAM waves for the first time. Other than that, the proposed antenna… More >

Pichaya Chaipanya^1,*, Supachai Kaewuam¹, Jiraphan Hirunruang¹, Wichaya Suntara¹, Nuchanart Santalunai², Samran Santalunai³

CMC-Computers, Materials & Continua, Vol.73, No.1, pp. 181-198, 2022, DOI:10.32604/cmc.2022.028616 - 18 May 2022

Abstract This paper presents the single element dual band switched beam textile antenna. The antenna can operate at frequencies of 0.7 and 2.6 GHz using for 5G wireless communication applications. Textile fabric is considered to be used for substrate layer at the parts of a microstrip antenna for wireless body area network. The beam pattern of antenna can be switched into two directions by changing the position of shorted-circuit points at each edge of antenna. The main beam direction is 45°/225° when corner A is shorted while it steers at 135°/315° when corner B is shorted… More >

Mohammad Monirujjaman Khan^1,*, Bright Yeboah-Akowuah², Kaisarul Islam¹, Eric Tutu Tchao², Sumanta Bhattacharyya³, Rajesh Dey⁴, Mehedi Masud⁵, Fahad Alraddady⁶

Computer Systems Science and Engineering, Vol.42, No.3, pp. 1079-1093, 2022, DOI:10.32604/csse.2022.022313 - 08 February 2022

Abstract This research presents an ultra-wideband (UWB) textile antenna design for body-centric applications. The antenna is printed on a 1 mm thick denim substrate with a 1.7 relative permittivity. The jeans substrate is sandwiched between a partial ground plane and a radiating patch with a Q-shaped slot. The slotted radiating patch is placed above the substrate and measures 27.8 mm × 23.8 mm. In free space, the antenna covers the ultra-wideband spectrum designated by the Federal Communication Commission (FCC). Various parameters of the antenna design were changed for further performance evaluation. Depending on the operating frequency, the antenna's realized gain varied… More >

Mohammad Monirujjaman Khan¹, Arifa Sultana¹, Mehedi Masud^2,*, Gurjot Singh Gaba³, Hesham A. Alhumyani⁴

Computer Systems Science and Engineering, Vol.40, No.3, pp. 1183-1198, 2022, DOI:10.32604/csse.2022.019872 - 24 September 2021

Abstract This paper presents the design and analysis of a miniaturized and novel wearable ultra-wideband (UWB) band-notch textile antenna for Body Area Networks (BANs). The major goal of building the antenna for wearable applications with band notch in X-band is to reject the downlink band (7.25 to 7.75 GHz) of satellite communication in the UWB frequency ranges of 3.1–10.6 GHz to keep away from interference. Computer Simulation Technology (CST) TM Microwave Studio, which is user-friendly and reliable, was used to model and simulate the antenna. The radiating element of the antenna is designed on Jeans’ textile… More >