Yeye Liu¹, Leilei Zhang^1,*, Ruonan Zhang¹, Siqi Shao¹, Lina Sun¹, Xinyi Wan¹, Tiantian Wang¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.30, No.2, pp. 1-1, 2024, DOI:10.32604/icces.2024.012576

Abstract Superior thermal insulating and fire-retardant ceramic membranes are urgently demanded in the aerospace, construction and chemical engineering industries. However, the generic characteristics of ceramic membranes, such as brittleness, structural collapse and crystallization-induced pulverization behavior, present a great plague to their practical applications. Herein, we report a highly flexible, mechanically stable, fire retardant and high-temperature-resistant ceramic membrane based on the interlocked Si₃N₄ nanowires formed by the precursor pyrolysis method. The Si₃N₄ nanowires membrane (SNM) has excellent high temperature resistance under alcohol lamp and butane spray lance. The thermal insulation with a thermal conductivity as low as 0.056… More >

Lian Liu^1,2, Liang Li^1,2, Kebo Jiao^1,2,*, Junwei Fang^1,2, Yun Luo^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.5, pp. 975-987, 2024, DOI:10.32604/fdmp.2023.030109 - 07 June 2024

Abstract Ultra-deep reservoirs play an important role at present in fossil energy exploitation. Due to the related high temperature, high pressure, and high formation fracture pressure, however, methods for oil well stimulation do not produce satisfactory results when conventional fracturing fluids with a low pumping rate are used. In response to the above problem, a fracturing fluid with a density of 1.2~1.4 g/cm was developed by using Potassium formatted, hydroxypropyl guanidine gum and zirconium crosslinking agents. The fracturing fluid was tested and its ability to maintain a viscosity of 100 mPa.s over more than 60 min More >

Ping Lv¹, Jiufei Liu², Mengran Xu^3,*, Hui Tian^3,4, Huajie Liu³, Yuhuan Bu³, Zhuang Cai³, Junfeng Qu⁵

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.11, pp. 2907-2921, 2023, DOI:10.32604/fdmp.2023.029304 - 18 September 2023

Abstract Cementing carbonate reservoirs is generally a difficult task. The so-called thixotropic cement slurry has gained considerable attention in this regard as it can help to fix some notable problems. More precisely, it can easily fill the leakage layer; moreover, its gelling strength can grow rapidly when pumping stops, thereby increasing the resistance to gas channeling, effectively preventing this undesired phenomenon in many cases. High-temperature thixotropic cement slurry systems, however, are still in an early stage of development and additional research is needed to make them a viable option. In the present study, using a self-developed… More >

Xuyang Yao^1,*, Kecheng Liu¹, Zenan Zhou¹, Jun Zhou¹, Xianbin Huang², Tiemei Lu¹, Yongsheng Yu¹, He Li²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.7, pp. 1775-1787, 2023, DOI:10.32604/fdmp.2023.025843 - 08 March 2023

Abstract Water-based drilling fluids can cause hydration of the wellbore rocks, thereby leading to instability. This study aimed to synthesize a hydrophobic small-molecule polymer (HLMP) as an inhibitor to suppress mud shale hydration. An infrared spectral method and a thermogravimetric technique were used to characterize the chemical composition of the HLMP and evaluate its heat stability. Experiments were conducted to measure the linear swelling, rolling recovery rate, and bentonite inhibition rate and evaluate accordingly the inhibition performance of the HLMP. Moreover, the HLMP was characterized through measurements of the zeta potential, particle size distribution, contact angles,… More > Graphic Abstract