Bo Liu^1,2,*, Jia Xie², Gonghua Chen², Yugang Gong², Hongliang Yao¹, Tiegang Li¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.30, No.4, pp. 1-1, 2024, DOI:10.32604/icces.2024.012904

Abstract Biodegradable metal implants that meet clinical applications require good mechanical properties and an appropriate biodegradation rate. Additively manufactured (AM) biodegradable zinc (Zn) alloys constitute an essential branch of orthopedic implants because of their moderate degradation and bone-mimicking mechanical properties. This paper investigated the microstructural evolution and corrosion mechanisms of zinc-copper (Zn-Cu) alloys prepared by the laser-powder-bed-fusion (L-PBF) additive manufacturing method. Alloying with Cu significantly increases the ultimate tensile strength (UTS) of unalloyed Zn, but the UTS and ductility of unalloyed Zn and Zn-2Cu decrease with increasing laser energy density. Unalloyed Zn has a dendritic microstructure,… More >

Yuhang Lyu¹, Shaohai Dong¹, Li Ting Gao¹, Zhan-Sheng Guo^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.30, No.3, pp. 1-1, 2024, DOI:10.32604/icces.2024.012815

Abstract Drying and calendering processes are crucial in electrode manufacturing, as they significantly affect the mechanical and electrochemical performances of lithium-ion batteries. In this study, we established a three-dimensional (3D) representative volume element (RVE) of electrodes composed of active material particles, carbon binder domain particles, solvent, and different particle contact types. We continuously simulated the 3D macroscopic and microscopic structural evolutions of the RVE during drying and calendering using the discrete element method (DEM). Based on the evolution of the particle coordination numbers and contact networks during drying, we propose a three-stage-drying scheme, consistent with the More >

Mingzhi Chen¹, Zhandong Wang², Guifang Sun^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.29, No.4, pp. 1-1, 2024, DOI:10.32604/icces.2024.012203

Abstract Marine environments pose severe corrosion challenges to underwater equipment, thereby leading to significant risks and demanding immediate in-situ restoration. Here we developed an underwater laser directed energy deposition (UDMD) technique to repair the E690 steel and enhance its corrosion resistance. Systematic investigations about the underwater pressure (P) and 316L stainless steel (SS316L) coatings on the microstructure, mechanical properties, and corrosion resistance of the repaired E690 steel were conducted. Results show that water cooling can refine grain, promote the formation of lath martensite, and increase dislocation density. No obvious relationship between the pressure and microstructure evolution… More >

Jian Yang, Xiaoli Li^*, Hui Wang, Kaiqiang Geng

Journal of Renewable Materials, Vol.9, No.12, pp. 2241-2260, 2021, DOI:10.32604/jrm.2021.015565 - 22 June 2021

Abstract In the present study, in order to investigate the effects of fly ash on the structural evolution and strength damage mechanism of Pisha-sandstone cement soil, unconfined compressive strength tests of Pisha-sandstone cement soil with different fly ash content levels and various ages were carried out. The apparent morphology, microstructures, and chemical compositions of the samples were observed and analyzed using ultra-depth three-dimensional microscopy, scanning electron microscopy, and XRD methods. The results revealed that the unconfined compressive strength levels of Pisha-sandstone cement soil samples displayed increasing trends with the increases in fly ash content and age.… More > Graphic Abstract

Hsin-Yu Chen, Nien-Ti Tsou^*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.3, pp. 55-55, 2019, DOI:10.32604/icces.2019.05403

Abstract Shape memory alloys has been widely applied on actuators and medical devices. The transformation temperature and microstructural evolution play the crucial factors and dominate the behavior of shape memory alloys. In order to understand the influence of the composition of the Ni-Ti on the two factors, molecular dynamics (MD) is adopted to simulate the temperature-induced phase transformation in the current study. In addition, the results are post-processed by the martensite variant identification method. The method allows to reveal the detailed microstructural evolution and the volume fraction of each variant/phase in each case of the composition More >

Hsin-Yu Chen¹, Nien-Ti Tsou^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.120, No.2, pp. 319-332, 2019, DOI:10.32604/cmes.2019.06447

Abstract Shape memory alloys has been widely applied on actuators and medical devices. The transformation temperature and microstructural evolution play two crucial factors and dominate the behavior of shape memory alloys. In order to understand the influence of the composition of the Ni-Ti alloys on the two factors, molecular dynamics was adopted to simulate the temperature-induced phase transformation. The results were post-processed by the martensite variant identification method. The method allows to reveal the detailed microstructural evolution of variants/phases in each case of the composition of Ni-Ti. Many features were found and having good agreement with More >

Marcelo M. Oliveira^1,2, Antônio A. S. Curvelo^2,3, Carlos Driemeier^1*

Journal of Renewable Materials, Vol.6, No.2, pp. 152-159, 2018, DOI:10.7569/JRM.2017.6341576

Abstract Lignocellulose conversion into cellulosic ethanol and coproducts starts with a pretreatment step. Most current industrial plants of cellulosic ethanol use thermochemical pretreatments under hydrothermal conditions, with or without addition of acid catalyst. Such pretreatments modify biomass chemistry and morphology, particularly at the nanoscale. In this work, we use X-ray diffraction, dynamic vapor sorption and calorimetric thermoporometry to investigate the biomass nanostructural changes promoted by hydrothermal conditions. We compare and differentiate the rind and pith fractions of sugarcane stalks in order to contribute to the understanding of rind-pith contrasting recalcitrance. Moreover, for both cane fractions our More >

Kai Wang¹, Guojian Li¹, Qiang Wang^1,2, Huimin Wang¹, Jiaojiao Du¹, Jicheng He¹

CMC-Computers, Materials & Continua, Vol.38, No.2, pp. 79-89, 2013, DOI:10.3970/cmc.2013.038.079

Abstract Study on the behaviors of the melting and coalescence of clusters in atomic scale may create new structure at nanoscale, which is a very important research field. The structural evolutions of clusters Cu₃₂₁, Co₃₂₁, and Ni₃₂₁ during their melting and coalescence processes were studied using molecular dynamics simulation with a general embedded atom method in this paper. It was found that the geometries of Cu₃₂₁ and Co₃₂₁ transformed to icosahedron from fcc near their melting points, which leads to the increase of their melting points. Concerning the coalescence, it was found that Cu atoms easily formed a coating More >