Imran Ashraf¹, Muhammad Usman Ali², Soojung Hur¹, Gunzung Kim¹, Yongwan Park^1,*

CMC-Computers, Materials & Continua, Vol.73, No.1, pp. 1747-1768, 2022, DOI:10.32604/cmc.2022.020610

Abstract Indoor positioning and localization have emerged as a potential research area during the last few years owing to the wide proliferation of smartphones and the inception of location-attached services for the consumer industry. Due to the importance of precise location information, several positioning technologies are adopted such as Wi-Fi, ultrawideband, infrared, radio frequency identification, Bluetooth beacons, pedestrian dead reckoning, and magnetic field, etc. Although Wi-Fi and magnetic field-based positioning are more attractive concerning the deployment of Wi-Fi access points and ubiquity of magnetic field data, the latter is preferred as it does not require any additional infrastructure as other approaches… More >

Tamara al Shloul¹, Usman Azmat², Suliman A. Alsuhibany³, Yazeed Yasin Ghadi⁴, Ahmad Jalal², Jeongmin Park^5,*

Intelligent Automation & Soft Computing, Vol.34, No.2, pp. 715-732, 2022, DOI:10.32604/iasc.2022.025421

Abstract The physical and the mental health of a human being largely depends upon his physical life-routine (PLR) and today’s much advanced technological methods make it possible to recognize and keep track of an individual’s PLR. With the successful and accurate recognition of PLR, a sublime service of health education can be made copious. In this regard, smartphones can play a vital role as they are ubiquitous and have utilitarian sensors embedded in them. In this paper, we propose a framework that extracts the features from the smartphone sensors data and then uses the sequential feature selection to select the most… More >

Elias Hossain¹, Mohammed Alshehri², Sultan Almakdi^2,*, Hanan Halawani², Md. Mizanur Rahman³, Wahidur Rahman⁴, Sabila Al Jannat⁵, Nadim Kaysar⁶, Shishir Mia⁴

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 1713-1746, 2022, DOI:10.32604/cmc.2022.024822

Abstract Diabetes Mellitus is one of the most severe diseases, and many studies have been conducted to anticipate diabetes. This research aimed to develop an intelligent mobile application based on machine learning to determine the diabetic, pre-diabetic, or non-diabetic without the assistance of any physician or medical tests. This study's methodology was classified into two the Diabetes Prediction Approach and the Proposed System Architecture Design. The Diabetes Prediction Approach uses a novel approach, Light Gradient Boosting Machine (LightGBM), to ensure a faster diagnosis. The Proposed System Architecture Design has been combined into seven modules; the Answering Question Module is a natural… More >

Imran Ashraf, Sadia Din, Soojung Hur, Yongwan Park^*

CMC-Computers, Materials & Continua, Vol.70, No.3, pp. 5213-5232, 2022, DOI:10.32604/cmc.2022.018707

Abstract Precise information on indoor positioning provides a foundation for position-related customer services. Despite the emergence of several indoor positioning technologies such as ultrawideband, infrared, radio frequency identification, Bluetooth beacons, pedestrian dead reckoning, and magnetic field, Wi-Fi is one of the most widely used technologies. Predominantly, Wi-Fi fingerprinting is the most popular method and has been researched over the past two decades. Wi-Fi positioning faces three core problems: device heterogeneity, robustness to signal changes caused by human mobility, and device attitude, i.e., varying orientations. The existing methods do not cover these aspects owing to the unavailability of publicly available datasets. This… More >

Muhammad Atif Hanif¹, Tallha Akram¹, Aamir Shahzad², Muhammad Attique Khan³, Usman Tariq⁴, Jung-In Choi⁵, Yunyoung Nam^6,*, Zanib Zulfiqar⁷

CMC-Computers, Materials & Continua, Vol.70, No.2, pp. 3221-3234, 2022, DOI:10.32604/cmc.2022.019815

Abstract Sensors based Human Activity Recognition (HAR) have numerous applications in eHeath, sports, fitness assessments, ambient assisted living (AAL), human-computer interaction and many more. The human physical activity can be monitored by using wearable sensors or external devices. The usage of external devices has disadvantages in terms of cost, hardware installation, storage, computational time and lighting conditions dependencies. Therefore, most of the researchers used smart devices like smart phones, smart bands and watches which contain various sensors like accelerometer, gyroscope, GPS etc., and adequate processing capabilities. For the task of recognition, human activities can be broadly categorized as basic and complex… More >

Nidhi Kalra^1,*, Raman Kumar Goyal¹, Anshu Parashar¹, Jaskirat Singh¹, Gagan Singla²

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 1967-1978, 2021, DOI:10.32604/cmc.2021.018732

Abstract Every 24 seconds, someone dies on the road due to road accidents and it is the 8th leading cause of death and the first among children aged 15–29 years. 1.35 million people globally die every year due to road traffic crashes. An additional 20–50 million suffer from non-fatal injuries, often resulting in long-term disabilities. This costs around 3% of Gross Domestic Product to most countries, and it is a considerable economic loss. The governments have taken various measures such as better road infrastructures and strict enforcement of motor-vehicle laws to reduce these accidents. However, there is still no remarkable reduction… More >

Adnan Bin Amanat Ali¹, Vasaki Ponnusamy¹, Anbuselvan Sangodiah¹, Roobaea Alroobaea², N. Z. Jhanjhi^3,*, Uttam Ghosh⁴, Mehedi Masud²

Intelligent Automation & Soft Computing, Vol.29, No.2, pp. 571-585, 2021, DOI:10.32604/iasc.2021.015913

Abstract Most smartphone users prefer easy and convenient authentication without remembering complicated passwords or drawing intricate patterns. Preferably, after one-time authentication, there is no verification of the user’s authenticity. Therefore, security and privacy against unauthorized users is a crucial research area. Behavioral authentication is an emerging security technique that is gaining attention for its uniqueness and transparency. In this paper, a behavior-based authentication system is built using swipe movements to continuously authenticate the user after one-time traditional authentication. The key feature is the selection of an optimal feature set for the swipe movement. Five machine learning classifiers are used, of which… More >

Shinjin Kang¹, Soo Kyun Kim^2,*

CMC-Computers, Materials & Continua, Vol.68, No.3, pp. 3725-3736, 2021, DOI:10.32604/cmc.2021.016828

Abstract In this study, we propose a low-cost system that can detect the space outlier utilization of residents in an indoor environment. We focus on the users’ app usage to analyze unusual behavior, especially in indoor spaces. This is reflected in the behavioral analysis in that the frequency of using smartphones in personal spaces has recently increased. Our system facilitates autonomous data collection from mobile app logs and Google app servers and generates a high-dimensional dataset that can detect outlier behaviors. The density-based spatial clustering of applications with noise (DBSCAN) algorithm was applied for effective singular movement analysis. To analyze high-level… More >

Muhammad Ahmad^1,*, Rana Aamir Raza², Manuel Mazzara³, Salvatore Distefano⁴, Ali Kashif Bashir⁵, Adil Khan³, Muhammad Shahzad Sarfraz¹, Muhammad Umar Aftab¹

CMC-Computers, Materials & Continua, Vol.68, No.2, pp. 1673-1692, 2021, DOI:10.32604/cmc.2021.016232

Abstract Smartphones have ubiquitously integrated into our home and work environments, however, users normally rely on explicit but inefficient identification processes in a controlled environment. Therefore, when a device is stolen, a thief can have access to the owner’s personal information and services against the stored passwords. As a result of this potential scenario, this work proposes an automatic legitimate user identification system based on gait biometrics extracted from user walking patterns captured by smartphone sensors. A set of preprocessing schemes are applied to calibrate noisy and invalid samples and augment the gait-induced time and frequency domain features, then further optimized… More >

Imran Ashraf, Soojung Hur, Yousaf Bin Zikria, Yongwan Park^*

CMC-Computers, Materials & Continua, Vol.68, No.2, pp. 2597-2620, 2021, DOI:10.32604/cmc.2021.016214

Abstract Predominantly the localization accuracy of the magnetic field-based localization approaches is severed by two limiting factors: Smartphone heterogeneity and smaller data lengths. The use of multifarious smartphones cripples the performance of such approaches owing to the variability of the magnetic field data. In the same vein, smaller lengths of magnetic field data decrease the localization accuracy substantially. The current study proposes the use of multiple neural networks like deep neural network (DNN), long short term memory network (LSTM), and gated recurrent unit network (GRN) to perform indoor localization based on the embedded magnetic sensor of the smartphone. A voting scheme… More >