Shazielya Shamsul¹, Mohammed A. H. Ali^1,2,*, Salwa Hanim Abdul-Rashid^1,2, Atef M. Ghaleb³, Fahad M. Alqahtani⁴

CMC-Computers, Materials & Continua, Vol.80, No.1, pp. 1277-1304, 2024, DOI:10.32604/cmc.2024.049257 - 18 July 2024

Abstract This paper presents a smart checkout system designed to mitigate the issues of noise and errors present in the existing barcode and RFID-based systems used at retail stores’ checkout counters. This is achieved by integrating a novel AI algorithm, called Improved Laser Simulator Logic (ILSL) into the RFID system. The enhanced RFID system was able to improve the accuracy of item identification, reduce noise interference, and streamline the overall checkout process. The potential of the system for noise detection and elimination was initially investigated through a simulation study using MATLAB and ILSL algorithm. Subsequently, it More >

Sikandar Khan¹, Khalid Saeed¹, Muhammad Faran Majeed^2,*, Salman A. AlQahtani³, Khursheed Aurangzeb³, Muhammad Shahid Anwar^4,*

CMC-Computers, Materials & Continua, Vol.77, No.1, pp. 1303-1323, 2023, DOI:10.32604/cmc.2023.039697 - 31 October 2023

Abstract Delay Tolerant Networks (DTNs) have the major problem of message delay in the network due to a lack of end-to-end connectivity between the nodes, especially when the nodes are mobile. The nodes in DTNs have limited buffer storage for storing delayed messages. This instantaneous sharing of data creates a low buffer/shortage problem. Consequently, buffer congestion would occur and there would be no more space available in the buffer for the upcoming messages. To address this problem a buffer management policy is proposed named “A Novel and Proficient Buffer Management Technique (NPBMT) for the Internet of… More >

Mercy Sharon Devadas¹, N. Bhalaji^1,*, Xiao-Zhi Gao²

Intelligent Automation & Soft Computing, Vol.36, No.3, pp. 2685-2702, 2023, DOI:10.32604/iasc.2023.031636 - 15 March 2023

Abstract In Mobile ad hoc Networks (MANETs), the packet scheduling process is considered the major challenge because of error-prone connectivity among mobile nodes that introduces intolerable delay and insufficient throughput with high packet loss. In this paper, a Modified Firefly Optimization Algorithm improved Fuzzy Scheduler-based Packet Scheduling (MFPA-FSPS) Mechanism is proposed for sustaining Quality of Service (QoS) in the network. This MFPA-FSPS mechanism included a Fuzzy-based priority scheduler by inheriting the merits of the Sugeno Fuzzy inference system that potentially and adaptively estimated packets’ priority for guaranteeing optimal network performance. It further used the modified Firefly More >

Ahmed Mohamed Ragab^1,*, Abdelhalim Abdelnaby Zekry², Ashraf Yahia Hassan¹

Energy Engineering, Vol.120, No.4, pp. 885-910, 2023, DOI:10.32604/ee.2023.026425 - 13 February 2023

Abstract Accurate PV system simulators are implemented with expensive software platforms using paid irradiance data. The main purpose of this paper is to develop and validate a PV system simulator, beginning with a solar cell parameter extraction model, then test and validate long-term Irradiance data using free online source (Typical Meteorological Year TMY in (PVGIS) European website), and finally building full solar generator simulator to run in working real conditions. Comparing results with Accurate Paid PV simulators (which use the Muneer model) showed good accuracy of the proposed simulator. Work flow starts with the Irradiance model’s… More >

Donghun Wang, Jonghyun Lee, Minchan Kim, Insoo Lee^*

Intelligent Automation & Soft Computing, Vol.36, No.2, pp. 2025-2040, 2023, DOI:10.32604/iasc.2023.034749 - 05 January 2023

Abstract Lithium-ion batteries are commonly used in electric vehicles, mobile phones, and laptops. These batteries demonstrate several advantages, such as environmental friendliness, high energy density, and long life. However, battery overcharging and overdischarging may occur if the batteries are not monitored continuously. Overcharging causes fire and explosion casualties, and overdischarging causes a reduction in the battery capacity and life. In addition, the internal resistance of such batteries varies depending on their external temperature, electrolyte, cathode material, and other factors; the capacity of the batteries decreases with temperature. In this study, we develop a method for estimating… More >

S. Jagir Hussain^*, M. Roopa

Computer Systems Science and Engineering, Vol.45, No.1, pp. 785-801, 2023, DOI:10.32604/csse.2023.030393 - 16 August 2022

Abstract Internet of Things (IoT) empowers imaginative applications and permits new services when mobile nodes are included. For IoT-enabled low-power and lossy networks (LLN), the Routing Protocol for Low-power and Lossy Networks (RPL) has become an established standard routing protocol. Mobility under standard RPL remains a difficult issue as it causes continuous path disturbance, energy loss, and increases the end-to-end delay in the network. In this unique circumstance, a Balanced-load and Energy-efficient RPL (BE-RPL) is proposed. It is a routing technique that is both energy-efficient and mobility-aware. It responds quicker to link breakage through received signal More >

John Ramirez¹, Sergio Rivera²

Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.38, No.2, pp. 1-9, 2022, DOI:10.23967/j.rimni.2022.03.013 - 01 April 2022

Abstract Nowadays, the world has focused on digital media. There have been voices for and against virtual education. Gamification has been described as a strategy to transmit knowledge through the design and use of games. This article describes the first phase of the development of a game aimed at the transmission of knowledge related to engineers dedicated to the commercialization, diagnosis, and repair of induction motors; these are electrical machines widely used in industry. In this way, this paper shows the Electric Motor Store Simulator (hereinafter STME for its acronym in Spanish) is a free software More >

César Chávez-Olivares¹, Eduardo Rubio¹, Cesar Guzmán¹

Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.38, No.2, pp. 1-18, 2022, DOI:10.23967/j.rimni.2022.04.001 - 07 April 2022

Abstract ADAMS-MATLAB co-simulation is widely used in complex system development to control models of closed-loop mechanisms. An advantage of ADAMS is to facilitate the configuration of parameters such as friction. However, its mathematical friction model is unknown. There are alternatives such as Simscape Multibody that facilitate the configuration of any friction model. This paper presents a case study of dynamic simulation using the mathematical model of a mechanism in order to compare it with ADAMS and Simscape Multibody. The state-space model uses the parameters b and f_c – viscous and Coulomb friction coefficients. However, ADAMS uses only More >

Samuel Bimenyimana¹, Chen Wang^1,*, Godwin Norense Osarumwense Asemota², Aphrodis Nduwamungu², Francis Mulolani⁶, Jean De Dieu Niyonteze⁸, Shilpi Bora^1,7, Chun-Ling Ho¹, Noel Hagumimana³, Theobald Habineza⁴, Waqar Bashir⁵, Yiyi Mo¹

Energy Engineering, Vol.119, No.6, pp. 2369-2406, 2022, DOI:10.32604/ee.2022.019257 - 14 September 2022

Abstract The world’s energy consumption and power generation demand will continue to rise. Furthermore, the bulk of the energy resources needed to satisfy the rising demand is far from the load centers. The aforementioned requires long-distance transmission systems and one way to accomplish this is to use high voltage direct current (HVDC) transmission systems. The main technical issues for HVDC transmission systems are loss of synchronism, variation of quadrature currents, amplitude, the inability of station 1 (rectifier), and station 2 (inverter) to either inject, or absorb active, or reactive power in the network in any circumstances… More >

Faheem Khan¹, Muhammad Zahid², Hüseyin Gürüler³, Ilhan Tarimer³, Taegkeun Whangbo^1,*

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 663-678, 2022, DOI:10.32604/cmc.2022.022934 - 24 February 2022

Abstract The Internet of thing (IoT) is a growing concept for smart cities, and it is compulsory to communicate data between different networks and devices. In the IoT, communication should be rapid with less delay and overhead. For this purpose, flooding is used for reliable data communication in a smart cities concept but at the cost of higher overhead, energy consumption and packet drop etc. This paper aims to increase the efficiency in term of overhead and reliability in term of delay by using multicasting and unicasting instead of flooding during packet forwarding in a smart… More >