Hongwei Guan¹, Lingjian Ye^2,3,*, Yurun Wang², Feifan Shen⁴, Yuchen He³

Intelligent Automation & Soft Computing, Vol.36, No.3, pp. 3535-3550, 2023, DOI:10.32604/iasc.2023.036399

Abstract The absorber is the key unit in the post-combustion monoethanolamine (MEA)-based carbon dioxide (CO₂) capture process. A rate-based dynamic model for the absorber is developed and validated using steady-state experimental data reported in open literature. Sensitivity analysis is performed with respect to important model parameters associated with the reaction, mass transport and physical property relationships. Then, a singular value decomposition (SVD)-based subspace parameter estimation method is proposed to improve the model accuracy. Finally, dynamic simulations are carried out to investigate the effects of the feed rate of lean MEA solution and the flue inlet conditions. Simulation results indicate that the… More >

Lifan Zhao^1,2, Zetian Huang^1,2, Qiming Fu^1,2,3,*, Nengwei Fang⁴, Bin Xing⁴, Jianping Chen^2,3,*

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.3, pp. 2741-2758, 2023, DOI:10.32604/cmes.2023.025500

Abstract Aiming at optimizing the energy consumption of HVAC, an energy conservation optimization method was proposed for HVAC systems based on the sensitivity analysis (SA), named the sensitivity analysis combination method (SAC). Based on the SA, neural network and the related settings about energy conservation of HVAC systems, such as cooling water temperature, chilled water temperature and supply air temperature, were optimized. Moreover, based on the data of the existing HVAC system, various optimal control methods of HVAC systems were tested and evaluated by a simulated HVAC system in TRNSYS. The results show that the proposed SA combination method can reduce… More >

Rafael Marin Ferro^1,2,*, Renato Pavanello²

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.2, pp. 1371-1397, 2023, DOI:10.32604/cmes.2023.026043

Abstract This work analyzes the implementation of a continuous method of structural topology optimization (STO) using open-source software for all stages of the topology optimization problem: modeling, sensitivity analysis and optimization. Its implementation involves three main components: numerical analysis using the Finite Element Method (FEM), sensitivity analysis using an Adjoint method and an optimization solver. In order to allow the automated numerical solution of Partial Differential Equations (PDEs) and perform a sensitivity analysis, FEniCS and Dolfin Adjoint software are used as tools, which are open-source code. For the optimization process, Ipopt (Interior Point OPTimizer) is used, which is a software package… More >

Wenhui Li¹, Dazhi Wang^1,*, Shuo Cao², Deshan Kong¹, Sihan Wang¹, Zhong Hua¹

CMC-Computers, Materials & Continua, Vol.75, No.1, pp. 259-276, 2023, DOI:10.32604/cmc.2023.034622

Abstract In this paper, the axial-flux permanent magnet driver is modeled and analyzed in a simple and novel way under three-dimensional cylindrical coordinates. The inherent three-dimensional characteristics of the device are comprehensively considered, and the governing equations are solved by simplifying the boundary conditions. The axial magnetization of the sector-shaped permanent magnets is accurately described in an algebraic form by the parameters, which makes the physical meaning more explicit than the purely mathematical expression in general series forms. The parameters of the Bessel function are determined simply and the magnetic field distribution of permanent magnets and the air-gap is solved. Furthermore,… More >

Donghai Li^1,2, Jiawei Tian¹, Shengwen Shi², Shanchao Wang², Jucai Deng², Shuilong He^1,2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.1, pp. 421-445, 2023, DOI:10.32604/cmes.2023.024133

Abstract To better improve the lightweight and fatigue durability performance of the tractor cab, a multi-objective lightweight design of the cab was carried out in this study. First, the finite element model of the cab with counterweight loading was established and then confirmed by the physical testing, and use the inertial relief method to obtain stress distribution under unit load. The cab-frame rigid-flexible coupling multi-body dynamics model was built by Adams/car software. Taking the cab airbag mount displacement and acceleration signals acquired on the proving ground as the desired signals and obtaining the fatigue analysis load spectrum through Femfat-Lab virtual iteration.… More > Graphic Abstract

Zhijie Zheng¹, Song Zhang¹, Xiaolei Zhang², Bo Yang¹, Fang Yan³, Xiaoning Ge^3,*

Energy Engineering, Vol.120, No.3, pp. 633-647, 2023, DOI:10.32604/ee.2022.024081

Abstract The DC distribution network system equipped with a large number of power electronic equipment exhibits weak damping characteristics and is prone to low-frequency and high-frequency unstable oscillations. The current interpretation of the oscillation mechanism has not been unified. Firstly, this paper established the complete state-space model of the distribution system consisting of a large number of electric vehicles, characteristic equation of the distribution network system is derived by establishing a state-space model, and simplified reduced-order equations describing the low-frequency oscillation and the high-frequency oscillation are obtained. Secondly, based on eigenvalue analysis, the oscillation modes and the influence of the key… More >

Chen Wei-wei¹, He Wei^1,2,*, Zhu Hai-long¹, Zhou Guo-hui¹, Mu Quan-qi¹, Han Peng¹

CMC-Computers, Materials & Continua, Vol.74, No.3, pp. 6119-6143, 2023, DOI:10.32604/cmc.2023.035743

Abstract The prediction of processor performance has important reference significance for future processors. Both the accuracy and rationality of the prediction results are required. The hierarchical belief rule base (HBRB) can initially provide a solution to low prediction accuracy. However, the interpretability of the model and the traceability of the results still warrant further investigation. Therefore, a processor performance prediction method based on interpretable hierarchical belief rule base (HBRB-I) and global sensitivity analysis (GSA) is proposed. The method can yield more reliable prediction results. Evidence reasoning (ER) is firstly used to evaluate the historical data of the processor, followed by a… More >

Nima Pirhadi¹, Xusheng Wan¹, Jianguo Lu¹, Jilei Hu^2,3,*, Mahmood Ahmad^4,5, Farzaneh Tahmoorian⁶

CMES-Computer Modeling in Engineering & Sciences, Vol.135, No.1, pp. 733-754, 2023, DOI:10.32604/cmes.2022.022207

Abstract Liquefaction is one of the most destructive phenomena caused by earthquakes, which has been studied in the issues of potential, triggering and hazard analysis. The strain energy approach is a common method to investigate liquefaction potential. In this study, two Artificial Neural Network (ANN) models were developed to estimate the liquefaction resistance of sandy soil based on the capacity strain energy concept (W) by using laboratory test data. A large database was collected from the literature. One group of the dataset was utilized for validating the process in order to prevent overtraining the presented model. To investigate the complex influence… More >

Mengyao Yan¹, Xianqi Zeng¹, Banghui Zhang¹, Hui Zhang², Di Tan¹, Binghua Cai¹, Shenchun Qu¹, Sanhong Wang^1,*

Phyton-International Journal of Experimental Botany, Vol.92, No.1, pp. 193-208, 2023, DOI:10.32604/phyton.2022.023078

Abstract The effect of soil nutrient content on fruit yield and fruit quality is very important. To explore the effect of soil nutrients on apple quality we investigated 200 fruit samples from 40 orchards in Feng County, Jiangsu Province. Soil mineral elements and fruit quality were measured. The effect of soil nutrient content on fruit quality was analyzed by artificial neural network (ANN) model. The results showed that the prediction accuracy was highest (R²= 0.851, 0.847, 0.885, 0.678 and 0.746) in mass per fruit (MPF), hardness (HB), soluble solids concentrations (SSC), titratable acid concentration (TA) and solid-acid ratio (SSC/TA), respectively. The sensitivity… More >

Lingyun Zhao^1,2, Heng Yang^3,4,*, Yuanlong Wei^1,2,*, Yuhuan Bu^3,4, Shaorui Jing^3,4, Peiming Zhou^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.2, pp. 329-344, 2023, DOI:10.32604/fdmp.2022.020216

Abstract Perforation and fracturing are typically associated with the development of coalbed methane wells. As the cement sheath is prone to failure during this process, in this work, the effects of the casing pressure, elastic modulus of the cement, elastic modulus of the formation, and casing eccentricity on the resulting stresses are analyzed in the frame of a finite element method. Subsequently, sensitivity response curves of the cement sheath stress are plotted by normalizing all factors. The results show that the maximum circumferential stress and Mises stress of the cement sheath increase with the casing internal pressure, elastic modulus of the… More > Graphic Abstract