Home / Advanced Search

  • Title/Keywords

  • Author/Affliations

  • Journal

  • Article Type

  • Start Year

  • End Year

Update SearchingClear
  • Articles
  • Online
Search Results (7)
  • Open Access



    Vijay W. Bhatkara,*, Anirban Surb,*, Anindita Royb

    Frontiers in Heat and Mass Transfer, Vol.19, No.1, pp. 1-7, 2022, DOI:10.5098/hmt.19.15

    Abstract Versatile vapor compression refrigeration system is designed, developed and fabricated such that desired condensing and evaporating temperatures can be obtained by providing different electronic controls for superheating, subcooling, fan speed, air heaters and water heatersto use alternative refrigerants to R134a such as R1234ze, R152a, R600a, R290 and R290/R600a (50/50%) with conventional and minichannel condenser. All the refrigerant are tested for condensing temperature ranging from 40 °C to 55 °C while evaporating temperature changes from -10 °C to 15 °C for both condensers. The total exergy loss for main system components such as compressor, condenser, expansion valve and evaporator are calculated.… More >

  • Open Access


    Performance Analysis of a Solar Continuous Adsorption Refrigeration System

    Kolthoum Missaoui1,2,*, Nader Frikha2,3, Abdelhamid Kheiri1, Slimane Gabsi2,3, Mohammed El Ganaoui4

    FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.4, pp. 1067-1081, 2023, DOI:10.32604/fdmp.2022.021969

    Abstract A study is conducted on the performances of a solar powered continuous-adsorption refrigerator considering two particular days as references cases, namely, the summer solstice (June 21st) and the autumn equinox (September 21st). The cooling capacity, system performance coefficient and the daily rate of available cooling energy are assessed. The main goal is to compare the performances of a solar adsorption chiller equipped with a hot water tank (HWT) with an equivalent system relying on solar collectors with no heat storage module. The daily cooling rates for the solar refrigerator are found to be 102.4 kWh and 74.3 kWh, respectively, on… More >

  • Open Access


    Improving the Thermal Efficiency and Performance of Refrigeration Systems: Numerical-Experimental Analysis of Minimization of Frost Formation

    Felipe Mercês Biglia1, Raquel da Cunha Ribeiro da Silva2, Fátima de Moraes Lino3, Kamal Abdel Radi Ismail3, Thiago Antonini Alves4,*

    Energy Engineering, Vol.119, No.5, pp. 1771-1788, 2022, DOI:10.32604/ee.2022.019625

    Abstract The frost growth on cold surfaces in evaporators is an undesirable phenomenon which becomes a problem for the thermal efficiency of the refrigeration systems because the ice layer acts as a thermal insulation, drastically reducing the rate of heat transfer in the system. Its accumulation implies an increase in energy demand and a decrease in the performance of various components involved in the refrigeration process, reducing its efficiency and making it necessary to periodically remove the frost, resulting in expenses for the defrost process. In the present work, a numerical-experimental analysis was performed in order to understand the formation process… More >

  • Open Access


    Simulation Analysis of Ammonia Leakage and Dispersion in a Large-Scale Refrigeration System

    Jianlu Cheng1, Kaiyong Hu1,*, Jiang Shen1, Lu Jia1,2, Rui Niu1, Zhaoxian Yang3

    FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.4, pp. 1049-1066, 2022, DOI:10.32604/fdmp.2022.019007

    Abstract The use of ammonia in large-scale refrigeration systems (such as those used for a stadium) requires adequate ammonia leakage prevention mechanisms are put in place. In the present study, numerical simulations have been conducted to study the dispersion law in the ammonia machinery room of the refrigeration system for the 2022 Beijing Winter Olympics. The wind speed, and release location have been varied to investigate their effects on the dispersion profile. Different positions of the leakage points in the ammonia storage tank have been found to lead to different areas affected accordingly. In general, the dangerous region area decreases with… More >

  • Open Access


    CFD Analysis of the Influence of Ionic Liquids on the Performances of a Refrigeration System

    Jianghao Niu*

    FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.6, pp. 1003-1013, 2021, DOI:10.32604/fdmp.2021.015225

    Abstract The falling film of an ionic liquid ([EMIM] [DMP] + H2O) and its effect on a refrigeration system are numerically simulated in the framework of a Volume of Fluid (VOF) method (as available in the ANSYS Fluent computational platform). The properties of the liquid film and the wall shear stress (WSS) are compared with those obtained for a potassium bromide solution. Different working conditions are considered. It is noted that the ionic liquid demonstrates a better absorption capability, with a coefficient of performance (COP) of 0.55. It is proved that the [EMIM] [DMP] + H2O ionic liquid working substance is… More >

  • Open Access


    Development of Environmentally Friendly and Energy Efficient Refrigerants for Refrigeration Systems

    Piyanut Saengsikhiao1, Juntakan Taweekun1,2,*, Kittinan Maliwan2, Somchai Sae-ung2, Thanansak Theppaya2

    Energy Engineering, Vol.118, No.2, pp. 411-433, 2021, DOI:10.32604/EE.2021.012860

    Abstract This paper presents the improvement of eco-friendly and power consumption saving refrigerants for refrigeration systems. The novel azeotropic refrigerant mixtures of HFCs and HCs can replace refrigeration systems, and using the R134, R32, R125, and R1270 refrigerants in several compositions found using the decision tree function of the RapidMiner software (which came first in the KDnuggets annual software poll). All refrigerant results are mixed of POE, which is A1 classification refrigerant, non-flammable, and innocuous refrigerant, and using REFPROP software and CYCLE_D-HX software are under the CAN/ANSI/AHRI540 standards. The boiling point of the new refrigerant mix R-No.595 is 4.58%, lower than… More >

  • Open Access

    Experimental Analysis of the Performances of Unit Refrigeration Systems Based on Parallel Compressors with Consideration of the Volumetric and Isentropic Efficiency

    Daoming Shen1,2,*, Chao Gui1, Jinhong Xia1, Songtao Xue2,3

    FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.3, pp. 489-500, 2020, DOI:10.32604/fdmp.2020.08969

    Abstract The performances of a refrigeration unit relying on compressors working in parallel have been investigated considering the influence of the compressor volumetric efficiency and isentropic efficiency on the compression ratio. Moreover, the following influential factors have been taken into account: evaporation temperature, condensation temperature and compressor suction-exhaust pressure ratio for different opening conditions of the compressor. The following quantities have been selected as the unit performance measurement indicators: refrigeration capacity, energy efficiency ratio (COP), compressor power consumption, and refrigerant flow rate. The experimental results indicate that the system refrigeration capacity and COP decrease with a decrease in evaporation temperature, increase… More >

Displaying 1-10 on page 1 of 7. Per Page  

Share Link