Yongsong Li¹, Xiaomeng Yin², Yanming Xu^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.132, No.2, pp. 471-488, 2022, DOI:10.32604/cmes.2022.020201 - 15 June 2022

Abstract The isogeometric boundary element technique (IGABEM) is presented in this study for steady-state inhomogeneous heat conduction analysis. The physical unknowns in the boundary integral formulations of the governing equations are discretized using non-uniform rational B-spline (NURBS) basis functions, which are utilized to build the geometry of the structures. To speed up the assessment of NURBS basis functions, the B´ezier extraction approach is used. To solve the extra domain integrals, we use a radial integration approach. The numerical examples show the potential of IGABEM for dimension reduction and smooth integration of CAD and numerical analysis. More >

Leilei Chen¹, Kunpeng Li¹, Xuan Peng², Haojie Lian^3,4,*, Xiao Lin⁵, Zhuojia Fu⁶

CMES-Computer Modeling in Engineering & Sciences, Vol.126, No.1, pp. 125-146, 2021, DOI:10.32604/cmes.2021.012821 - 22 December 2020

Abstract This paper presents an isogeometric boundary element method (IGABEM) for transient heat conduction analysis. The Non-Uniform Rational B-spline (NURBS) basis functions, which are used to construct the geometry of the structures, are employed to discretize the physical unknowns in the boundary integral formulations of the governing equations. B´ezier extraction technique is employed to accelerate the evaluation of NURBS basis functions. We adopt a radial integration method to address the additional domain integrals. The numerical examples demonstrate the advantage of IGABEM in dimension reduction and the seamless connection between CAD and numerical analysis. More >

Shige Wang¹, Zhongwang Wang¹, Leilei Chen¹, Haojie Lian^2,3,*, Xuan Peng⁴, Haibo Chen⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.124, No.2, pp. 585-604, 2020, DOI:10.32604/cmes.2020.09904 - 20 July 2020

Abstract The paper applied the isogeometric boundary element method (IGABEM) to thermoelastic problems. The Non-Uniform Rational B-splines (NURBS) used to construct geometric models are employed to discretize the boundary integral formulation of the governing equation. Due to the existence of thermal stress, the domain integral term appears in the boundary integral equation. We resolve this problem by incorporating radial integration method into IGABEM which converts the domain integral to the boundary integral. In this way, IGABEM can maintain its advantages in dimensionality reduction and more importantly, seamless integration of CAD and numerical analysis based on boundary More >

Liu Liqi¹, Wang Haitao^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.109-110, No.4, pp. 303-324, 2015, DOI:10.3970/cmes.2015.109.303

Abstract This paper presents a three-dimensional (3-D) boundary element method (BEM) scheme based on the Radial Integration Method (RIM) for wave propagation analysis of continuously non-homogeneous problems. The Kelvin fundamental solutions are adopted to derive the boundary-domain integral equation (BDIE). The RIM proposed by Gao (Engineering Analysis with Boundary Elements 2002; 26(10):905-916) is implemented to treat the domain integrals in the BDIE so that only boundary discretization is required. After boundary discretization, a set of second-order ordinary differential equations with respect to time variable are derived, which are solved using the Wilson-q method. Main advantages of More >

J. Useche¹, H. Alvarez¹

CMES-Computer Modeling in Engineering & Sciences, Vol.107, No.4, pp. 277-296, 2015, DOI:10.3970/cmes.2015.107.277

Abstract Dynamic stress analysis of laminated composites plates represents a relevant task in designing of aerospace, shipbuilding and automotive components where impulsive loads can lead to sudden structural failure. The mechanical complexity inherent to these kind of components makes the numerical modeling an essential engineering analysis tool. This work deals with dynamic analysis of stresses and deformations in laminated composites thick plates using a new Boundary Element Method formulation. Composite laminated plates were modeled using the Reissner’s plate theory. We propose a direct time-domain formulation based on elastostatic fundamental solution for symmetrical laminated thick plates. Formulation More >

A.V. Ekhlakov^1,2, O.M. Khay^1,3, Ch. Zhang¹, X.W. Gao⁴, J. Sladek⁵, V. Sladek⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.92, No.6, pp. 595-614, 2013, DOI:10.3970/cmes.2013.092.595

Abstract A boundary-domain integral equation method is applied to the transient thermoelastic crack analysis in functionally graded materials. Fundamental solutions for homogeneous, isotropic and linear elastic materials are used to derive the boundary-domain integral equations. The radial integration method, the Cartesian transformation method and the cell-integration method are applied for the evaluation of the arising domain-integrals. Numerical results for dynamic stress intensity factors obtained by the three approaches are presented, compared and discussed to show the accuracy and the efficiency of the domain-integral evaluation techniques. More >

E. L. Albuquerque¹, M. H. Aliabadi²

CMES-Computer Modeling in Engineering & Sciences, Vol.29, No.2, pp. 63-74, 2008, DOI:10.3970/cmes.2008.029.063

Abstract This paper presents a boundary element formulation for the analysis of thin shallow shells. Classical plate bending and plane elasticity formulations are coupled and effects of curvature are treated as body forces. The body forces are written as a sum of approximation functions multiplied by coefficients. Domain integrals that arise in the formulation are transformed into boundary integrals by the radial integration method. Two different approximation functions are employed, that is 1 + r and r² log r. The method is applied to several problems and the accuracy of each approximation function is assessed by comparison with More >