Liang Liu, Guangda Xu^*, Yuan Zhao, Yi Lu, Yu Li, Jing Gao

Energy Engineering, Vol.121, No.2, pp. 377-404, 2024, DOI:10.32604/ee.2023.041311 - 25 January 2024

Abstract The couple between the power network and the transportation network (TN) is deepening gradually with the increasing penetration rate of electric vehicles (EV), which also poses a great challenge to the traditional voltage control scheme. In this paper, we propose a coordinated voltage control strategy for the active distribution networks considering multiple types of EV. In the first stage, the action of on-load tap changer and capacitor banks, etc., are determined by optimal power flow calculation, and the node electricity price is also determined based on dynamic time-of-use tariff mechanism. In the second stage, multiple… More >

R. Vanalakshmi¹, S. Maragathasundari^1,*, M. Kameswari¹, B. Balamurugan², C. Swedheetha³

Intelligent Automation & Soft Computing, Vol.37, No.2, pp. 1399-1419, 2023, DOI:10.32604/iasc.2023.038506 - 21 June 2023

Abstract Queuing models are used to assess the functionality and aesthetics of SCADA systems for supervisory control and data collection. Here, the main emphasis is on how the queuing theory can be used in the system’s design and analysis. The analysis’s findings indicate that by using queuing models, cost-performance ratios close to the ideal might be attained. This article discusses a novel methodology for evaluating the service-oriented survivability of SCADA systems. In order to evaluate the state of service performance and the system’s overall resilience, the framework applies queuing theory to an analytical model. As a More >

Guangjun Liang^1,2, Jianfang Xin^3,*, Linging Xia¹, Xueli Ni^1,4, Yi Cao⁵

CMC-Computers, Materials & Continua, Vol.74, No.2, pp. 2981-2998, 2023, DOI:10.32604/cmc.2023.028597 - 31 October 2022

Abstract In this work, we consider the performance analysis of state dependent priority traffic and scheduling in device to device (D2D) heterogeneous networks. There are two priority transmission types of data in wireless communication, such as video or telephone, which always meet the requirements of high priority (HP) data transmission first. If there is a large amount of low priority (LP) data, there will be a large amount of LP data that cannot be sent. This situation will cause excessive delay of LP data and packet dropping probability. In order to solve this problem, the data… More >

Vinod Kumar Menaria¹, Anand Nayyar², Sandeep Kumar³, Ketan Kotecha^4,*

CMC-Computers, Materials & Continua, Vol.74, No.1, pp. 1199-1216, 2023, DOI:10.32604/cmc.2023.032162 - 22 September 2022

Abstract In today’s information technology (IT) world, the multi-hop wireless sensor networks (MHWSNs) are considered the building block for the Internet of Things (IoT) enabled communication systems for controlling everyday tasks of organizations and industry to provide quality of service (QoS) in a stipulated time slot to end-user over the Internet. Smart city (SC) is an example of one such application which can automate a group of civil services like automatic control of traffic lights, weather prediction, surveillance, etc., in our daily life. These IoT-based networks with multi-hop communication and multiple sink nodes provide efficient communication… More >

R. Soundhara Raja Pandian^*, C. Christopher Columbus

Computer Systems Science and Engineering, Vol.44, No.2, pp. 1749-1762, 2023, DOI:10.32604/csse.2023.028014 - 15 June 2022

Abstract Currently, e-learning is one of the most prevalent educational methods because of its need in today’s world. Virtual classrooms and web-based learning are becoming the new method of teaching remotely. The students experience a lack of access to resources commonly the educational material. In remote locations, educational institutions face significant challenges in accessing various web-based materials due to bandwidth and network infrastructure limitations. The objective of this study is to demonstrate an optimization and queueing technique for allocating optimal servers and slots for users to access cloud-based e-learning applications. The proposed method provides the optimization… More >

M. Iyapparaja¹, Naif Khalaf Alshammari^2,*, M. Sathish Kumar¹, S. Siva Rama Krishnan¹, Chiranji Lal Chowdhary¹

CMC-Computers, Materials & Continua, Vol.70, No.2, pp. 2225-2239, 2022, DOI:10.32604/cmc.2022.015707 - 27 September 2021

Abstract Infrastructure of fog is a complex system due to the large number of heterogeneous resources that need to be shared. The embedded devices deployed with the Internet of Things (IoT) technology have increased since the past few years, and these devices generate huge amount of data. The devices in IoT can be remotely connected and might be placed in different locations which add to the network delay. Real time applications require high bandwidth with reduced latency to ensure Quality of Service (QoS). To achieve this, fog computing plays a vital role in processing the request More >

M. Iyapparaja¹, M. Sathish Kumar¹, S. Siva Rama Krishnan¹, Chiranji Lal Chowdhary¹, Byungun Yoon², Saurabh Singh², Gi Hwan Cho^3,*

CMC-Computers, Materials & Continua, Vol.69, No.3, pp. 3163-3178, 2021, DOI:10.32604/cmc.2021.017302 - 24 August 2021

Abstract Industry 4.0 refers to the fourth evolution of technology development, which strives to connect people to various industries in terms of achieving their expected outcomes efficiently. However, resource management in an Industry 4.0 network is very complex and challenging. To manage and provide suitable resources to each service, we propose a FogQSYM (Fog–-Queuing system) model; it is an analytical model for Fog Applications that helps divide the application into several layers, then enables the sharing of the resources in an effective way according to the availability of memory, bandwidth, and network services. It follows the… More >

Mohammad Reza Okhovvat¹, Mohammad Taghi Kheirabadi^1,*, Ali Nodehi¹, Morteza Okhovvat²

Computer Systems Science and Engineering, Vol.39, No.2, pp. 165-178, 2021, DOI:10.32604/csse.2021.05468 - 20 July 2021

Abstract Wireless Sensor Actor Networks (WSANs) have contributed to the development of pervasive computing wherein time consideration to perform the tasks of pervasive applications is necessary. Hence, time constraint is one of the major challenges of WSANs. In this paper, we propose an analytical approach based on queuing theory to minimize the total time taken for completion of tasks, i.e., make-span, in WSANs with hybrid architecture. The best allocation rates of tasks to actor nodes are figured out through solving inequities and qualities resulting from a steady state analysis of the proposed model. Applying the calculated… More >

Cheng Gong¹, Dingbang Xie², Chao Guo^2,*, Sonia Kherbachi³

CMC-Computers, Materials & Continua, Vol.68, No.2, pp. 2127-2143, 2021, DOI:10.32604/cmc.2021.016436 - 13 April 2021

Abstract The wireless sensor network (WSN), as the terminal data acquisition system of the 5G network, has attracted attention due to advantages such as low cost and easy deployment. Its development is mainly restricted by energy. The traditional transmission control scheme is not suitable for WSNs due to the significant information interaction. A switchable transmission control scheme for WSNs based on a queuing game (SQGTC) is proposed to improve network performance. Considering that sensor nodes compete for the resources of sink nodes to realize data transmission, the competitive relationship between nodes is described from the perspective… More >

Ali A. R. Alkhafaji^*, Nilam Nur Amir Sjarif, M. A. Shahidan, Nurulhuda Firdaus Mohd Azmi, Haslina Md Sarkan, Suriayati Chuprat

CMC-Computers, Materials & Continua, Vol.68, No.1, pp. 77-102, 2021, DOI:10.32604/cmc.2021.015770 - 22 March 2021

Abstract The text of the Quran is principally dependent on the Arabic language. Therefore, improving the security and reliability of the Quran’s text when it is exchanged via internet networks has become one of the most difficult challenges that researchers face today. Consequently, the diacritical marks in the Holy Quran which represent Arabic vowels () known as the kashida (or “extended letters”) must be protected from changes. The cover text of the Quran and its watermarked text are different due to the low values of the Peak Signal to Noise Ratio (PSNR), and Normalized Cross-Correlation (NCC);… More >