Qianyu Zhang^1,2,#, Shi Chen^1,2,#, Long Cao^1,2, Hong Lei³, Antonio Pizzi⁴, Xuedong Xi^1,2,*, Guanben Du^1,2

Journal of Renewable Materials, Vol.12, No.2, pp. 235-244, 2024, DOI:10.32604/jrm.2023.029537

Abstract Using non-toxic, low-volatile glyoxal to completely replace formaldehyde for preparing urea-glyoxal (UG) resin adhesive is a hot research topic that could be of great interest for the wood industry. However, urea-glyoxal (UG) resins prepared by just using glyoxal instead of formaldehyde usually yields a lower degree of polymerization. This results in a poorer bonding performance and water resistance of UG resins. A good solution is to pre-react urea to preform polyurea molecules presenting already a certain degree of polymerization, and then to condense these with glyoxal to obtain a novel UG resin. Therefore, in this present work, the urea was… More > Graphic Abstract

XIN MENG^*, YAN LIU, SHUJUN XU, LIANRONG YANG, RUI YIN

BIOCELL, Vol.48, No.1, pp. 65-78, 2024, DOI:10.32604/biocell.2023.045986

Abstract Over the past decade, the swift advancement of metabolomics can be credited to significant progress in technologies such as mass spectrometry, nuclear magnetic resonance, and multivariate statistics. Currently, metabolomics garners widespread application across diverse fields including drug research and development, early disease detection, toxicology, food and nutrition science, biology, prescription, and chinmedomics, among others. Metabolomics serves as an effective characterization technique, offering insights into physiological process alterations in vivo. These changes may result from various exogenous factors like environmental conditions, stress, medications, as well as endogenous elements including genetic and protein-based influences. The potential scientific outcomes gleaned from these insights… More > Graphic Abstract

Zhengqing Ding, Quan Yang, Xinyan Yan, Feng Gu, Xujuan Huang^*, Zhaosheng Cai^*

Journal of Renewable Materials, Vol.12, No.1, pp. 103-117, 2024, DOI:10.32604/jrm.2023.029424

Abstract Dehydroabietyl polyethylene glycol glycidyl ether-grafted hydroxyethyl cellulose (HEC) polymer surfactant (DA(EO)₅GE-g-HEC) was prepared using ring-opening polymerization with biobased rosin and hydroxyethyl cellulose as feedstocks. Dehydroabietyl polyethylene glycol glycidyl ether (DA(EO)₅GE) was formed by condensation of dehydroabietyl alcohol polyoxyethylene ether (Rosin derivative: DA(EO)₅H) and epichlorohydrin. The grafting degree of DA(EO)₅GE-g-HEC was manipulated by adjusting the mass ratio of HEC and DA(EO)₅GE and confirmed by EA. According to the formula, when m_(HEC)/m_(DA(EO)2GE) was 1:1~1:5, the grafting rate of DA(EO)₅GE in DA(EO)₅GE-g-HEC varied from 34.43% to 38.33%. The surface activity and foam properties of DA(EO)₅GE-g-HEC aqueous solution were studied. The results showed that… More > Graphic Abstract

Ying Ji^*, Xi Liu^*

Journal of Renewable Materials, Vol.11, No.11, pp. 3977-3989, 2023, DOI:10.32604/jrm.2023.028439

Abstract The problem of low disposal and utilization rate of bulk industrial solid waste needs to be solved. In this paper, a high-activity admixture composed of steel slag-phosphate slag-limestone powder was proposed for most of the solid waste with low activity and a negative impact on concrete workability, combining the characteristics of each solid waste. The paper demonstrates the feasibility and explains the principle of the composite system in terms of water requirement of standard consistency, setting time, workability, and mechanical properties, combined with the composition of the phases, hydration temperature, and microscopic morphology. The results showed that the steel slag:phosphate… More > Graphic Abstract

Asmaa Salah¹, Hoda Sany¹, Abo El-Khair B. El-Sayed², Reham M. El-Bahbohy¹, Heba I. Mohamed^3,*, Ayman Amin^1,*

Phyton-International Journal of Experimental Botany, Vol.92, No.10, pp. 2875-2890, 2023, DOI:10.32604/phyton.2023.031064

Abstract Water is the most essential natural resource for the future development. Agriculture production is extensively water-dependent and a significant polluter of water resources. So, this work investigated the effect of two different preparation media [Bold’s Basal Medium (BBM) and Domiati cheese whey (DCW)] for agricultural drainage water (ADW) remediation. All treatments were incubated for 6 days. According to the results of biomass productivity, specific growth rate, photosynthetic pigments, and biochemical composition, Desmodesmus sp. can grow in drainage water without dilution. The two treatments significantly reduced the concentration of nitrate, phosphate, chemical oxygen demand, and sodium in ADW. Finally, using cheese… More >

Zhijian Zhou¹, Jie Yan^1,*, Xinxiang Du¹, Qiulin Xu¹, Zijun Wu², Jinlan Yang³, Xitong Fang¹, Qiuling Zhong², Qiaoguang Li^1,*

Journal of Renewable Materials, Vol.11, No.9, pp. 3501-3515, 2023, DOI:10.32604/jrm.2023.027852

Abstract Iron-pillared bentonite (FB) was prepared by Fe(III) modified bentonite, and then the composites (FB-OS) were prepared by iron-pillared bentonite and oyster shell powder. The composites were characterized by FTIR, SEM, TGA, and EDS, and the phosphorus removal test was carried out. The results showed that FB-OS contained a large amount of CaO. Its structure was compact, but there were gaps in it. The maximum bending stress and compressive strength were 43.7 N and 0.927 MPa, respectively. The phosphorus removal test showed that the phosphorus removal rate of FB-OS was more than 90%, and measured the maximum adsorption capacity was 48.31… More > Graphic Abstract

Xiaoyan Liu^1,2, Zhao Qin^1,2,*, Yuxiang Ma^1,2, Huamin Liu^1,2,*, Xuede Wang^1,2

Journal of Renewable Materials, Vol.11, No.8, pp. 3203-3225, 2023, DOI:10.32604/jrm.2023.027613

Abstract Packaging is a food preservation technology widely used in the world. Naturally-sourced, biodegradable polymers are becoming increasingly popular in the food packaging sector. Packaging films prepared using cellulose as raw material would contribute to resource sustainability, but the difficulty of cellulose solubilization limits their further development. In view of this, a series of novel solvent systems (LiCl/DMAc, ILs, TBAH/DMSO, NMMO, alkali/urea solutions, metal-complex solutions) were used to prepare high-strength and high-performance cellulose-based films; their characteristics and the mechanisms involved were investigated. Composite films prepared by blending cellulose with various polymers (synthetic polymers, natural polymers, proteins and enzymes, metal particles, and… More > Graphic Abstract

Wen Gu^#, Xinyue Ding^#, Min Tang^*, Feiyan Gong^*, Shuangshuang Yuan, Jintao Duan

Journal of Renewable Materials, Vol.11, No.8, pp. 3245-3259, 2023, DOI:10.32604/jrm.2023.027461

Abstract Biomass adhesive is conducive to decreasing the dependence of the wood adhesive industry on synthetic resin based on fossil resources and improving the market competitiveness of adhesives. It is also a critical breakthrough to realize the goal of carbon peaking and carbon neutrality in the wood industry. In this study, a full biomass wood adhesive composed of tannin and sucrose was developed and applied successfully to the preparation of plywood. The preparation technique of plywood was optimized, and the chemical structure, curing performance, crystallization property and thermal performance of the adhesive were investigated. Results showed that: (1) hot-pressing temperature played… More >

Yalin Li^1,*, Lei Liu¹, Wenbao Huang¹, Junpu Xie², Zhaoxia Song¹, Shuna Guo¹, Enci Wang¹

Journal of Renewable Materials, Vol.11, No.7, pp. 3001-3023, 2023, DOI:10.32604/jrm.2023.026604

Abstract To achieve optimal recovery and value-added utilisation of cellulose in peanut shells, the cellulose in peanut shells was first extracted using the sodium hydroxide-sodium chlorite method. Then, cellulose hydrogel was prepared by graft copolymerisation using N, N’-methylenebisacrylamide as the cross-linking agent, sodium persulfate as the initiator, and acrylic acid as the monomer. Orthogonal optimisation experiments were designed to obtain optimal process parameters for hydrogel preparation with the cellulose dosage of 0.40 g, initiator dosage of 0.20 g, polymerisation temperature of 70°C, cross-linking agent of 0.25 g, and monomer dosage of 3.0 mL. The effect of initiator dosage on hydrogel synthesis was… More > Graphic Abstract

Kai Zhu¹, Hao Chen^1,*, Shuang Wang^1,*, Chuan Yuan^1,2, Bin Cao³, Jun Ni¹, Lujiang Xu⁴, Anqing Zheng⁵, Arman Amani Babadi¹

Journal of Renewable Materials, Vol.11, No.6, pp. 2849-2864, 2023, DOI:10.32604/jrm.2023.026317

Abstract Microalgae biomass is an ideal precursor to prepare renewable carbon materials, which has broad application. The bioaccumulation efficiency (lipids, proteins, carbohydrates) and biomass productivity of microalgae are influenced by spectroscopy during the culture process. In this study, a bilayer plate-type photobioreactor was designed to cultivate Chlorella protothecoides with spectral selectivity by nanofluids. Compared to culture without spectral selectivity, the spectral selectivity of Ag/CoSO₄ nanofluids increased microalgae biomass by 5.76%, and the spectral selectivity of CoSO₄ solution increased by 17.14%. In addition, the spectral selectivity of Ag/CoSO₄ nanofluids was more conducive to the accumulation of nutrients (29.46% lipids, 50.66% proteins, and… More > Graphic Abstract