Youssef Maaloufa^1,2,3,*, Soumia Mounir^1,2,3, Sara Ibnelhaj², Fatima Zohra El Wardi⁶, Asma Souidi³, Yakubu Aminu Dodo^4,5, Malika Atigui³, Mina Amazal³, Abelhamid Khabbazi², Hassan Demrati³, Ahmed Aharoune³

Journal of Renewable Materials, Vol.12, No.4, pp. 843-867, 2024, DOI:10.32604/jrm.2024.049942

Abstract The development of bio-sourced materials is essential to ensuring sustainable construction; it is considered a locomotive of the green economy. Furthermore, it is an abundant material in our country, to which very little attention is being given. This work aims to valorize the waste of the trunks of banana trees to be used in construction. Firstly, the physicochemical properties of the fiber, such as the percentage of crystallization and its morphology, have been determined by X-ray diffraction tests and scanning electron microscopy to confirm the potential and the impact of the mode of drying on… More >

A. Lkouen^1,*, M. Lamrani², A. Meskini¹, A. Khabbazi³

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.8, pp. 2013-2026, 2023, DOI:10.32604/fdmp.2023.026929

Abstract Most of the energy savings in the building sector come from the choice of the materials used and their microphysical properties. In the present study, through numerical simulations a link is established between the thermal performance of composite materials and their microstructures. First, a two-phase 3D composite structure is modeled, then the RSA (Random Sequential Addition) algorithm and a finite element method (FE) are applied to evaluate the effective thermal conductivity of these composites in the steady-state. In particular, building composites based on gypsum and clay, consolidated with peanut shell additives and/or cork are considered.… More > Graphic Abstract

Nikola Vavřínová^*, Kateřina Stejskalová, Jiří Teslík, Kateřina Kubenková, Jiří Majer

Journal of Renewable Materials, Vol.10, No.7, pp. 1859-1873, 2022, DOI:10.32604/jrm.2022.018908

Abstract This article is focused on the investigation of the mechanical and thermal properties of composite material that could be used for the production of plaster or plasterboards. This composite material is made of gypsum and reinforcing natural fibers. The article verifies whether this natural reinforcement can improve the investigated properties compared to conventional plasters and gypsum plasterboards made of pure gypsum. From this composite material, high-strength plasterboards could then be produced, which meet the higher demands of users than conventional gypsum plasterboards. For their production, natural waste materials would be used efficiently. As part of… More >

Wenbei Bi¹, Zengfeng Yan^1,*, Huan Zhao¹, Lixin Sun², Xudong Wang^3,4, Zhengmo Zhang³

Journal of Renewable Materials, Vol.8, No.12, pp. 1691-1710, 2020, DOI:10.32604/jrm.2020.012808

Abstract Murals in Mogao Grottoes consist of three parts: support layer, earthen plasters and paint layer. The earthen plasters play a key role in the preservation of murals. It is a mixture of Dengban soil, sand, and plant fiber. Two different natural fibers, hemp fiber and cotton fiber, were reinforced to earthen plasters in the same percentage to evaluate the influence on hygrothermal performance. The two types of earthen plasters were studied: one containing hemp fiber in the fine plaster (HFP) and the other containing cotton fiber in the fine plaster (CFP). Specific heat capacity, dry… More >

P. Kolarkar¹, M. Mahendran, S. Gunalan

The International Conference on Computational & Experimental Engineering and Sciences, Vol.9, No.4, pp. 243-244, 2009, DOI:10.3970/icces.2009.009.243

Abstract Fire safety of light gauge cold-formed steel frame (LSF) stud wall systems is critical to the building design as their use has become increasingly popular in commercial, industrial and residential construction throughout Australia. These walls are made of a cold-formed steel frame lined with multiple plasterboards (up to 4 on each side) and are often used as load-bearing walls. Currently there is limited design information on LSF load bearing walls for use by Australian engineers and designers. Hence LSF wall manufacturers depend on full scale fire tests using the standard fire curve based on ISO834… More >