Heru Suryanto^1,2,*, Daimon Syukri³, Fredy Kurniawan⁴, Uun Yanuhar⁵, Joseph Selvi Binoj⁶, Sahrul Efendi², Fajar Nusantara², Jibril Maulana⁷, Nico Rahman Caesar⁵, Komarudin Komarudin²

Journal of Renewable Materials, Vol.12, No.9, pp. 1605-1624, 2024, DOI:10.32604/jrm.2024.054047 - 25 September 2024

Abstract Utilizing biomass waste as a potential resource for cellulose production holds promise in mitigating environmental consequences. The current study aims to utilize pineapple biowaste extract in producing bacterial cellulose acetate-based membranes with magnetic nanoparticles (Fe₃O₄ nanoparticles) through the fermentation and esterification process and explore its characteristics. The bacterial cellulose fibrillation used a high-pressure homogenization procedure, and membranes were developed incorporating 0.25, 0.50, 0.75, and 1.0 wt.% of Fe₃O₄ nanoparticles as magnetic nanoparticle for functionalization. The membrane characteristics were measured in terms of Scanning Electron Microscope, X-ray diffraction, Fourier Transform Infrared, Vibrating Sample Magnetometer, antibacterial activity, bacterial… More > Graphic Abstract

Heru Suryanto^1,2,*, Bili Darnanto Susilo³, Jibril Maulana³, Aminnudin³, Uun Yanuhar⁴, Surjani Wonorahardjo^2,5, Husni Wahyu Wijaya^2,5, Abu Saad Ansari⁶

Journal of Renewable Materials, Vol.10, No.9, pp. 2455-2465, 2022, DOI:10.32604/jrm.2022.020478 - 30 May 2022

Abstract Waste is the main problem for the environment. Handling waste for various useful applications has a benefit for the future. This work has been studied for handling pineapple peel waste to make composite film bacterial cellulose nanocomposite membrane (BCNM) with addition graphite nanoplatelet (GNP). The concentration of GNP in the membrane influence the membrane properties. The bacterial cellulose (BC) pellicle was synthesized by using media from pineapple peel waste extract. BC pellicle is cleaned with water and NaOH solution to be free from impactors. BCNM is synthesized through the mechanical disintegration stage. The results of… More > Graphic Abstract

Heru Suryanto^1,2,*, Muhamad Muhajir¹, Bili Darnanto Susilo¹, Yanuar Rohmat Aji Pradana¹, Husni Wahyu Wijaya^2,3, Abu Saad Ansari⁴, Uun Yanuhar⁵

Journal of Renewable Materials, Vol.9, No.10, pp. 1717-1728, 2021, DOI:10.32604/jrm.2021.015312 - 12 May 2021

Abstract The microstructure of bacterial cellulose nanofibers (BCNs) film affects its characteristic. One of several means to engineer the microstructure is by changing the BCNs size and fiber distribution through a high-pressure homogenizer (HPH) process. This research aimed to find out the effects of repetition cycles on HPH process towards BCNs film characteristics. To prepare BCNs films, a pellicle from the fermentation of pineapple peels waste with Acetobacter xylinum (A. xylinum) was extracted, followed by crushing the pellicle with a high-speed blender, thereafter, homogenized using HPH at 150 bar pressure with variations of 5, 10, 15, and 20… More >

Luis Alfonso Aguilar Pérez^1,*, Daniel Nieto Ángel^1,*, Moisés Roberto Vallejo Pérez², Daniel Leobardo Ochoa Martínez¹, David Espinosa Victoria³, Andrés Rebolledo Martinez⁴, Abel Rebouças São José⁵

Phyton-International Journal of Experimental Botany, Vol.90, No.4, pp. 1205-1216, 2021, DOI:10.32604/phyton.2021.015109 - 27 April 2021

Abstract The development and implementation of sustainable and environmentally friendly agricultural practices are indispensable as alternatives to pesticide use and to keep populations of soil-borne plant pathogens at levels that do not affect crop productivity. The present research evaluates the incidence of soil-borne phytopathogens on the pineapple variety MD-2, which was subjected to different treatments: Incorporation of Crotalaria juncea into the soil (organic amendment), application of dolomitic lime to soil (inorganic amendment), and the use of plastic mulch covering the soil. During the crop cycle (15 months), the following variables were evaluated: plant height (cm), fruit weight (kg·plant⁻¹… More >

Alexandra Augusta Reichert¹, Mariana Ribas de Sá², Gabriela Escobar Hochmuller da Silva¹, Cesar Augusto Gonçalves Beatrice³, André Ricardo Fajardo⁴, Amanda Dantas de Oliveira^1,*

Journal of Renewable Materials, Vol.8, No.10, pp. 1327-1341, 2020, DOI:10.32604/jrm.2020.010291 - 31 August 2020

Abstract Nowadays, the production of consumer goods is based on the use of non-renewable raw materials, which in recent years has been performing as a problem for the environment. Considering the large number of available biofibers in nature, their use in the development of polymeric composites has inevitably emerged, it is also necessary to take into account the countless discarded plastics that still have the potential to be reused. In this work, fibers were extracted from pineapple crown residues and utilized to compose sustainable composites using recycled polypropylene from cups discarded in the trash as a… More >

A. A. Mazlan¹, M. T. H. Sultan^1,2,3,*, S. N. A. Safri², N. Saba², A. U. M. Shah², M. Jawaid²

Journal of Renewable Materials, Vol.8, No.7, pp. 833-843, 2020, DOI:10.32604/jrm.2020.08724 - 01 June 2020

Abstract The present paper deals with the effect of loading different pineapple leaf fibre (PALF) length (short, mixed and long fibres) and their reinforcement for the fabrication of vinyl ester (VE) composites. Performance of PALF/VE composites was investigated through three-point bending flexural testing and viscoelastic (dynamic) mechanical properties through dynamic mechanical analysis (DMA). DMA results revealed that the long PALF/VE composites displayed better mechanical, damping factor and dynamic properties as compared to the short and mixed PALF/VE composites. The flexural strength and modulus of long PALF/VE composites were 113.5 MPa and 14.3 GPa, respectively. The storage More >

Galia Moreno, Karla Ramirez, Marianelly Esquivel, Guillermo Jimenez*

Journal of Renewable Materials, Vol.7, No.1, pp. 9-20, 2019, DOI:10.32604/jrm.2019.00017

Abstract Poly(lactic acid) (PLA) composite films reinforced with microcrystalline cellulose (MCC) extracted from pineapple leaf fibers (PALF) were prepared by a solution casting procedure. In an attempt to improve the interaction between PLA and cellulose, two approaches were adopted; first, poly(ethylene glycol) (PEG) was used as a surfactant, and second, the cellulosic fibers were pre-treated using tert-butanol (TBA). Lignocellulosic and cellulosic substrates were characterized using Fourier transform infrared (FTIR), wide-angle X-ray scattering (WAXS), and thermogravimetrical analysis (TGA). MCC from PALF showed good thermal stability, left few residues after decomposing, and exhibited high crystallinity index. Mechanical, thermal More >

Xiaojian Zhou^1,2, Hui Wang¹, Jun Zhang², Zhifeng Zheng¹, Guanben Du^1,2,*

Journal of Renewable Materials, Vol.6, No.1, pp. 68-74, 2018, DOI:10.7569/JRM.2017.634150

Abstract Pineapple leaf nanofibers (PLNFs) extracted from pineapple leaf fiber were used for reinforcing biobased polyurethane foam (BPU). The dispersion performance of PLNF in the foaming mixture system, nanocomposite foaming behavior, cell morphology, cell size, density, compressive strength and dimensional stability were investigated. The viscosity of the mixtures increased with increasing the PLNF content. The addition of a tiny amount of PLNF did not influence the exothermic temperature of the foam system, but reduced the expansion and gel time of the nanocomposite foams. This reduced time was found to increase the production efficiency. Scanning electron More >

M. Asim¹, M. Jawaid^1,2*, M. Nasir³, N. Saba¹

Journal of Renewable Materials, Vol.6, No.4, pp. 383-393, 2018, DOI:10.7569/JRM.2017.634162

Abstract This study deals with the analysis of dynamic mechanical, thermal and flammability properties of treated and untreated pineapple leaf fiber (PALF) and kenaf fiber (KF) phenolic composites. Results indicated that storage modulus was decreased for all composites with increases in temperature and pattern of slopes for all composites, having almost the same values of E' at glass transition temperature (Tg). The peak of the loss modulus of pure phenolic composites was shown to be much less. After the addition of kenaf/PALF, peaks were higher and shifted towards a high temperature. The Tan delta peak height More >

Galia Moreno, Karla Ramirez, Marianelly Esquivel, Guillermo Jimenez*

Journal of Renewable Materials, Vol.6, No.4, pp. 362-369, 2018, DOI:10.7569/JRM.2017.634167

Abstract Cellulose, microcrystalline cellulose and nanocellulose were prepared from three agricultural waste resources: pineapple leaf (PALF), banana rachis (BR), and sugarcane bagasse (SCB). Each waste resource was first converted into microcrystalline cellulose which was subsequently converted into cellulose nanoparticles by using mild (30% w/v) and strong (60% w/v) sulfuric acid concentrations for extraction. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) were used to characterize each waste resource and extracted cellulosic materials. Furthermore, nanocelluloses were studied by zeta potential, size analysis, and transmission electron microscopy (TEM). Cellulose nanowhiskers were successfully obtained and More >