Edja Florentin Assanvo^1,*, Kanga Marius N’GATTA¹, Kicoun Jean-Yves N’zi Touré^1,2,3, Amenan Sylvie Konan⁴, David Boa⁴

Journal of Polymer Materials, Vol.41, No.2, pp. 55-68, 2024, DOI:10.32604/jpm.2024.055397

Abstract The present study focused on extraction of Lonchocarpus cyanescens (L. cyanescens) fiber (LCF) and the physico-chemical properties of the obtained fiber. The fiber was extracted by manual and traditional rating methods, treated with sodium hydroxide, and characterized to determine its performance properties. The chemical composition of cellulose, hemicellulose, and lignin was determined according to the acid detergent, neutral detergent, and Klason methods, respectively. The results show significant quantities of cellulose (33%), hemicellulose (30%), and lignin (24%) in the studied fibers. LCF exhibited a porous multicellular and poly lamellate network structure (FE-SEM) with a crystallinity index of 56.5%. More >

Xiaojie Liang^1,2, Wei An², Yuekun Li², Yajun Wang², Xiaoya Qin², Yanhong Cui¹, Shuchai Su^1,*

Phyton-International Journal of Experimental Botany, Vol.93, No.3, pp. 467-486, 2024, DOI:10.32604/phyton.2024.047628

Abstract

Goji berry (Lycium barbarum L.) is substantially dependent on nitrogen fertilizer application, which can significantly enhance fruit yield and Goji berry industrial development in Ningxia, China. This study aimed to analyze the functions of differential nitrogen application rates including low (N1), medium (N2), and high (N3) levels in soil microbial community structure (bacterial and fungal) at 2 diverse soil depths (0–20, 20–40 cm) through high-throughput sequencing technology by targeting 16S RNA gene and ITS1 & ITS2 regions. All the observed physicochemical parameters exhibited significant improvement (p < 0.05) with increased levels of nitrogen and the highest

… More >

John Freddy Gelves-Díaz^1,*, Ludovic Dorkis², Richard Monroy-Sepúlveda¹, Sandra Rozo-Rincón¹, Yebrail Alexis Romero-Arcos¹

Journal of Renewable Materials, Vol.11, No.10, pp. 3769-3787, 2023, DOI:10.32604/jrm.2023.029270

Abstract Secondary lignocellulosic biomass has proved to be useful as an energy source through its oxidation by means of combustion processes. In accordance with the above, in this paper, we wanted to study the ash from urban pruning residues that are generated in cities in the Neotropics. Species such as Licania tomentosa, Azadirachta indica, Ficus benjamina, Terminalia catappa, Leucaena leucocephala, Prosopis juliflora and Pithecellobium dulce were selected because they have been previously studied and showed potential for thermal energy generation. These materials were calcined in an oxidizing atmosphere and characterized by X-ray diffraction and fluorescence, scanning electron microscopy with microchemistry, BET surface area,… More > Graphic Abstract

Abdellah Asbayou^*, Ahmed Ihlal, Ismail Isknan, Ahmed Soussi, Lahoussine Bouhouch

Journal of Renewable Materials, Vol.11, No.5, pp. 2249-2264, 2023, DOI:10.32604/jrm.2023.025456

Abstract Experiments of soiling effects on the performances of a PV panel have been performed using dust collected from two sites in the region of Agadir-Morocco. The optical transmittance of the front glass was found to depend on the nature and density of dust. The nature of dust was studied by means of scanning electron microscopy and energy dispersive x-ray spectroscopy. It was found that the granulometry of dust particles depends on the study area. For a dust density of around 20 g/m², the maximum power Pmax of the solar panel decreases drastically from 30 to More > Graphic Abstract

YAJIE LIU, LINLIN FANG, CHUNXUE YANG^*

BIOCELL, Vol.46, No.11, pp. 2475-2488, 2022, DOI:10.32604/biocell.2022.021477

Abstract Arbuscular mycorrhizal (AM) fungi are widely distributed in various habitats, and the community composition varies in response to the changing environmental conditions. To explore the response of community composition to the succession of saline-alkali land, soil samples were collected from three succession stages of Songnen saline-alkali grassland. Subsequently, the soil characteristics were determined and the AM fungi in soil samples were analyzed by high-throughput sequencing. Then, the response relationship between community composition and soil characteristics was studied by Canonical correlation and Pearson analyses. The soil properties improved with the succession of saline-alkali grassland. There was… More >

LORIS RIZZELLO^1,2,3, VALERIA DE MATTEIS^4,*

BIOCELL, Vol.46, No.11, pp. 2369-2380, 2022, DOI:10.32604/biocell.2022.021059

Abstract The SARS-CoV-2 outbreaks highlighted the need for effective, reliable, fast, easy-to-do and cheap diagnostics procedures. We pragmatically experienced that an early positive-case detection, inevitably coupled with a mass vaccination campaign, is a milestone to control the COVID-19 pandemic. Gold nanoparticles (AuNPs) can indeed play a crucial role in this context, as their physicochemical, optics and electronics properties are being extensively used in photothermal therapy (PTT), radiation therapy (RT), drug delivery and diagnostic. AuNPs can be synthesized by several approaches to obtain different sizes and shapes that can be easily functionalized with many kinds of molecules More >

Xiaojian Chen¹, Wenrui Yao¹, Feifei Gao¹, Dingyuan Zheng¹, Qiong Wang³, Jun Cao^2,*, Haiyan Tan¹, Yanhua Zhang^1,2,*

Journal of Renewable Materials, Vol.9, No.5, pp. 979-992, 2021, DOI:10.32604/jrm.2021.014751

Abstract The morphology and properties of corn starch and cassava starch were compared by SEM, DSC and TGA. The effects of amylose and amylopectin content on starch properties were studied by FT-IR, XRD and XPS. The plywood was pressed with the prepared adhesive and the bonding strength of the plywood was tested to analyze the difference among the adhesives from different plant sources and the difference after blending PAPI prepolymer. FT-IR results showed that the hydroxyl peak of cassava starch was stronger and wider. TGA showed that the residue of cassava starch was lower, but the More >

Kai Sheng¹, Saichao Wei¹, Jun Mei^1,2,3,4,*, Jing Xie^1,2,3,4,*

Phyton-International Journal of Experimental Botany, Vol.90, No.1, pp. 291-305, 2021, DOI:10.32604/phyton.2020.012985

Abstract Low-temperature storage is extensively used to optimize the postharvest life of various fresh fruits. However, red pitahaya (Hylocereus polyrhizus) fruits are sensitive to chilling injury (CI), which leads to the limitation of low-temperature storage. In this study, red pitahaya fruits were stored at 2, 4, 6, 8, and 10°C, respectively, for 27 days to determine the appropriate storage temperature. During the storage of red pitahaya fruits, storage at 8°C was more effective in suppressing decay and maintaining quality than other low temperatures. Low-temperature (2, 4, and 6°C) storage decreased weight loss (WL) and maintained higher content… More >

M. Khennache^1,*, A. Mahieu¹, M. Ragoubi¹, S. Taibi¹, C. Poilâne², N. Leblanc¹

Journal of Renewable Materials, Vol.7, No.9, pp. 821-838, 2019, DOI:10.32604/jrm.2019.06772

Abstract In France, the use of flax fibers as reinforcement in composite materials is growing exponentially in the automotive sector, thanks to their good physicochemical properties, environmental reasons, health neutrality and due to the European Council Directives on the reuse, recycling and valorization of car components and materials. The aim of our study is to investigate biochemical, physicochemical, and mechanical properties of technical flax fibers to evaluate the impact of transformation processes (scutching, hackling, and homogenization) on final properties of associated composite materials. Different chemical analysis such as Van Soest (biochemical fraction measurement), FTIR (Fourier Transform More >

H. Nakagawa¹, T. Shiina², M. Kotani³, H. Kotani¹, S. Ueno¹

Molecular & Cellular Biomechanics, Vol.3, No.4, pp. 163-163, 2006, DOI:10.32604/mcb.2006.003.163

Abstract This article has no abstract. More >