Haitao Li^1,*, Huizhong Zhang¹, Zhenyu Qiu¹, Jingwen Su², Dongdong Wei³, Rodolfo Lorenzo⁴, Conggan Yuan³, Hongzheng Liu⁵, Chungui Zhou⁶

Journal of Renewable Materials, Vol.8, No.1, pp. 13-27, 2020, DOI:10.32604/jrm.2020.09341 - 01 January 2020

Abstract In order to investigate the basic mechanical properties and stress strain relationship model for bamboo scrimber manufactured based on a new technique, a large quantities of experiments have been carried out. Based on the analysis of the test results, the following conclusions can be drawn. Two main typical failure modes were classified for bamboo scrimber specimens both under tension parallel to grain and tension perpendicular to grain. Brittle failure happened for all tensile tests. The slope values for the elastic stages have bigger discreteness compared with those for the specimens under tensile parallel to grain.… More >

Haitao Li^1,2,*, Zhenyu Qiu², Gang Wu^1,*, Dongdong Wei³, Rodolfo Lorenzo⁴, Conggan Yuan³, Huizhong Zhang^1,2, Rong Liu^1,2

Journal of Renewable Materials, Vol.7, No.7, pp. 583-600, 2019, DOI:10.32604/jrm.2019.07592

Abstract In order to investigate the influence of length and compression directions upon behaviour of parallel bamboo strand lumber (PBSL) specimens, 240 axial compression tests have been performed. With three similar one different typical failure modes, the mechanical performance for PBSL specimens under compression parallel to grain and perpendicular to grain are different as a whole. From the point of the characteristic values, the compression strength parallel to grain is 2.1 times of the compression strength perpendicular to grain. The elastic modulus for compression parallel to grain is 3.64 times of the compression strength perpendicular to… More >