Jianghao Niu^*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.6, pp. 1003-1013, 2021, DOI:10.32604/fdmp.2021.015225

Abstract The falling film of an ionic liquid ([EMIM] [DMP] + H₂O) and its effect on a refrigeration system are numerically simulated in the framework of a Volume of Fluid (VOF) method (as available in the ANSYS Fluent computational platform). The properties of the liquid film and the wall shear stress (WSS) are compared with those obtained for a potassium bromide solution. Different working conditions are considered. It is noted that the ionic liquid demonstrates a better absorption capability, with a coefficient of performance (COP) of 0.55. It is proved that the [EMIM] [DMP] + H₂O ionic liquid working substance is… More >

Taher M. Ghazal^1,2, Muhammad Zahid Hussain³, Raed A. Said⁵, Afrozah Nadeem⁶, Mohammad Kamrul Hasan¹, Munir Ahmad⁷, Muhammad Adnan Khan^3,4,*, Muhammad Tahir Naseem³

Intelligent Automation & Soft Computing, Vol.30, No.2, pp. 735-742, 2021, DOI:10.32604/iasc.2021.019067

Abstract Clustering is the process of grouping the data based on their similar properties. Meanwhile, it is the categorization of a set of data into similar groups (clusters), and the elements in each cluster share similarities, where the similarity between elements in the same cluster must be smaller enough to the similarity between elements of different clusters. Hence, this similarity can be considered as a distance measure. One of the most popular clustering algorithms is K-means, where distance is measured between every point of the dataset and centroids of clusters to find similar data objects and assign them to the nearest… More >

Zhigang Wu^1,#, Sicheng Chen^1,#, Jiankun Liang², Lifen Li¹, Xuedong Xi^3,4, Xue Deng¹, Bengang Zhang^3,*, Hong Lei^4,*

Journal of Renewable Materials, Vol.9, No.11, pp. 1959-1972, 2021, DOI:10.32604/jrm.2021.016786

Abstract Alkali lignin was processed by plasma and then used in modification of phenol formaldehyde resin in this study. Chemical structural changes of lignin which was processed by plasma as well as bonding strength, tensile property, curing performance and thermal property of the prepared phenol formaldehyde resin which was modified by the plasma processed lignin were analyzed. Results demonstrated that: (1) Alkali lignin was degraded after the plasma processing. The original groups were destroyed, and the aromatic rings collected abundant free radicals and oxygen-containing functional groups like hydroxyls, carbonyls, carboxyls and acyls were introduced into increase the reaction activity of lignin… More > Graphic Abstract

Sheng Liu¹, Ling Leng², Wenjie Zhou², Lei Shi^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.4, pp. 683-695, 2021, DOI:10.32604/fdmp.2021.013575

Abstract Proper design of exhaust systems in marine high-power turbocharged diesel engines can contribute to improve the low-speed performance of these engines and make the working conditions of the cylinders more uniform. Here a high-power marine 16-cylinder V-type turbocharged diesel engine is simulated using the GT-Power software. The results reveal the differences induced by different exhaust system structures, such as an 8-cylinder-in-pipe exhaust system with single/double superchargers and a 4-cylinder-in-pipe exhaust system with a single supercharger. After a comparative analysis, the 8-cylinder type with double superchargers is determined to be the optimal solution, and the structure of the exhaust system is… More >

Tetti Novalina Manik^1,2,*, Sulung Apria Nuki², Nur Aini Fauziyah¹, Mashuri¹, Mochamad Zainuri¹, Darminto^1,*

Journal of Renewable Materials, Vol.9, No.9, pp. 1647-1660, 2021, DOI:10.32604/jrm.2021.016089

Abstract The performance of oil palm trunk wastes from Banjarbaru of South Kalimantan was improved with the help of chemical modification in a two-step treatment. The first was formalization with formaldehyde solution with varying pH, and the second was impregnation with melamine-formaldehyde resin under 5 bar pressure for an hour. In these processes, the samples were cured at 120°C for 10 min and then dried in an oven at (103 ± 2)°C in order to attain a moisture content of less than 6%. These treatments improved the physical properties (density, moisture content, and volume swelling), mechanical resistance, dynamic-mechanical and acoustic performance… More > Graphic Abstract

Daoming Shen^1,2,*, Chao Gui¹, Jinhong Xia¹, Songtao Xue^2,3

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.3, pp. 489-500, 2020, DOI:10.32604/fdmp.2020.08969

Abstract The performances of a refrigeration unit relying on compressors working in parallel have been investigated considering the influence of the compressor volumetric efficiency and isentropic efficiency on the compression ratio. Moreover, the following influential factors have been taken into account: evaporation temperature, condensation temperature and compressor suction-exhaust pressure ratio for different opening conditions of the compressor. The following quantities have been selected as the unit performance measurement indicators: refrigeration capacity, energy efficiency ratio (COP), compressor power consumption, and refrigerant flow rate. The experimental results indicate that the system refrigeration capacity and COP decrease with a decrease in evaporation temperature, increase… More >

Chaoyi Wan^{1, *}

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.4, pp. 343-356, 2019, DOI:10.32604/fdmp.2019.07812

Abstract A comparative numerical study has been conducted on the thermal performance of a heat pipe cooling system considering several influential factors such as the coolant flow rate, the coolant inlet temperature, and the input power. A comparison between numerical data and results available in the literature has demonstrated that our numerical procedure could successfully predict the heat transfer performance of the considered heat pipe cooling system for a battery. Specific indicators such as temperature, heat flux, and pressure loss were extracted to describe the characteristics of such a system. On the basis of the distributions of the temperature ratio of… More >

Radu Mihai Iacob¹, Emil Budescu², Virgil Atanasiu²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.11, No.3, pp. 81-83, 2009, DOI:10.3970/icces.2009.011.081

Abstract This article has no abstract. More >

M. Khennache^1,*, A. Mahieu¹, M. Ragoubi¹, S. Taibi¹, C. Poilâne², N. Leblanc¹

Journal of Renewable Materials, Vol.7, No.9, pp. 821-838, 2019, DOI:10.32604/jrm.2019.06772

Abstract In France, the use of flax fibers as reinforcement in composite materials is growing exponentially in the automotive sector, thanks to their good physicochemical properties, environmental reasons, health neutrality and due to the European Council Directives on the reuse, recycling and valorization of car components and materials. The aim of our study is to investigate biochemical, physicochemical, and mechanical properties of technical flax fibers to evaluate the impact of transformation processes (scutching, hackling, and homogenization) on final properties of associated composite materials. Different chemical analysis such as Van Soest (biochemical fraction measurement), FTIR (Fourier Transform InfraRed spectroscopy), and XRD (X-ray… More >

Zhiqiang Yang¹, Junzhi Cui², Yufeng Nie¹, Qiang Ma²

CMES-Computer Modeling in Engineering & Sciences, Vol.88, No.5, pp. 419-442, 2012, DOI:10.3970/cmes.2012.088.419

Abstract In this paper, a new second-order two-scale (SOTS) method is developed to predict heat transfer performances of periodic porous materials with interior surface radiation. Firstly, the second-order two-scale formulation for computing temperature field of the problem is given by means of construction way. Then, the error estimation of the second-order two-scale approximate solution is derived on some regularity hypothesis. Finally, the corresponding finite element algorithms are proposed and some numerical results are presented. They show that the SOTS method in this paper is feasible and valid for predicting the heat transfer performances of periodic porous materials. More >