Yanshan Lu¹, Binbin He¹, Jun Jiang¹, Ruixiao Lin^2,*, Xinzhen Zhang², Zaimin Yang³, Zhi Rao³, Wenchuan Meng³, Siyang Sun³

Energy Engineering, Vol.120, No.12, pp. 2803-2818, 2023, DOI:10.32604/ee.2023.042328 - 29 November 2023

Abstract To solve the problem of residual wind power in offshore wind farms, a hydrogen production system with a reasonable capacity was configured to enhance the local load of wind farms and promote the local consumption of residual wind power. By studying the mathematical model of wind power output and calculating surplus wind power, as well as considering the hydrogen production/storage characteristics of the electrolyzer and hydrogen storage tank, an innovative capacity optimization allocation model was established. The objective of the model was to achieve the lowest total net present value over the entire life cycle.… More >

Xianjing Zhong¹, Xianbo Sun^1,*, Yuhan Wu²

CMC-Computers, Materials & Continua, Vol.76, No.2, pp. 1599-1619, 2023, DOI:10.32604/cmc.2023.039912 - 30 August 2023

Abstract To reduce the comprehensive costs of the construction and operation of microgrids and to minimize the power fluctuations caused by randomness and intermittency in distributed generation, a double-layer optimizing configuration method of hybrid energy storage microgrid based on improved grey wolf optimization (IGWO) is proposed. Firstly, building a microgrid system containing a wind-solar power station and electric-hydrogen coupling hybrid energy storage system. Secondly, the minimum comprehensive cost of the construction and operation of the microgrid is taken as the outer objective function, and the minimum peak-to-valley of the microgrid’s daily output is taken as the… More >

Dan Wu¹, Yanbo Che¹, Wei Li^2,*, Wei He³, Dongyi Li⁴

Energy Engineering, Vol.118, No.5, pp. 1549-1564, 2021, DOI:10.32604/EE.2021.014818 - 16 July 2021

Abstract With the significant progress of the “coal to electricity” project, the electric kiln equipment began to be connected to the distribution network on a large scale, which caused power quality problems such as low voltage, high harmonic distortion rate, and high reactive power loss. This paper proposes a two-stage power grid comprehensive resource optimization configuration model. A multi-objective optimization solution based on the joint simulation platform of Matlab and OpenDSS is developed. The solution aims to control harmonics and optimize reactive power. In the first stage, a multi-objective optimization model is established to minimize the… More >

Duojin Fan¹, Chengji Shi², Kai Sun², Xiaojuan Lu^2,*

Energy Engineering, Vol.118, No.4, pp. 1197-1221, 2021, DOI:10.32604/EE.2021.014532 - 31 May 2021

Abstract This paper proposed a new type of combined cooling heating and power (CCHP) system, including the parabolic trough solar thermal (PTST) power generation and gas turbine power generation. The thermal energy storage subsystem in the PTST unit provides both thermal energy and electrical energy. Based on the life cycle method, the configuration optimization under eight operation strategies is studied with the economy, energy, and environment indicators. The eight operation strategies include FEL, FEL-EC, FEL-TES, FEL-TES&EC, FTL, FTL-EC, FTL-TES, and FTL-TES&EC. The feasibility of each strategy is verified by taking a residential building cluster as an… More >