Xudong Jiang¹, Chang Liu^1,2,*, Shaohui Zhang³, Weisheng Zhang^1,2, Zongliang Du^1,2, Xiaoyu Zhang³, Huizhong Zeng³, Xu Guo^1,2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.135, No.2, pp. 809-838, 2023, DOI:10.32604/cmes.2023.023561

Abstract This paper proposes an explicit method for topology optimization of stiffened plate structures. The present work is devoted to simultaneously optimizing stiffeners’ shape, size and layout by seeking the optimal geometry parameters of a series of moving morphable components (MMC). The stiffeners with straight skeletons and the stiffeners with curved skeletons are considered to enhance the modeling and optimization capability of the current approach. All the stiffeners are represented under the Lagrangian-description framework in a fully explicit way, and the adaptive ground structure method, as well as dynamically updated plate/shell elements, is used to obtain optimized designs with more accurate… More > Graphic Abstract

Yang Yang, Jun Hu, Lin Zhu^*, Mengchen Pei

Journal of Renewable Materials, Vol.10, No.11, pp. 2835-2849, 2022, DOI:10.32604/jrm.2022.021840

Abstract Space solar power station is a novel renewable energy equipment in space to provide the earth with abundant and continuous power. The Orb-shaped Membrane Energy Gathering Array, one of the alternative construction schemes in China, is promising for collecting space sunlight with a large-scale spherical concentrator. Both the structural and optical performances such as root mean square deformation, natural frequency, system mass, and sunlight blocking rate have significant influences on the system property of the concentrator. Considering the comprehensive performance of structure and optic, this paper proposes a novel mesh grid based on normal polyhedron projection and spherical arc bisection… More > Graphic Abstract

Teng Yi^1,*, Shuenn-Ren Liou¹, Wen-Yih Kuo^1,2

Journal of Renewable Materials, Vol.10, No.6, pp. 1753-1772, 2022, DOI:10.32604/jrm.2022.018587

Abstract The paper investigates the second-order interactions of parameters in an alkali-activated mixture of paper production waste (PPW) and blast furnace slag (BFS) in Taguchi method. The PPW including lime mud (LM) and paper sludge (PS). This paper provides the experimental models to assess the compressive and flexural strength of them at 7-day and 28-day. The results have shown that the second-order interactions between PPW and alkali-activated activator exists in each experimental model, and the significant interactions affect the selection of optimal compositions. Compared with the interactions between the PPW themselves, the interactions between PPW and alkali-activated parameters are the main… More >

Xiangxi Du^1,*, Muyun Liu², Yanhua Sun¹

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.2, pp. 303-312, 2022, DOI:10.32604/fdmp.2022.016242

Abstract The computational fluid dynamics (CFD) technology is analyzed and calculated utilizing the turbulence model and multiphase flow model to explore the performance of internal circulating fluidized beds (ICFB) based on CFD. The three-dimensional simulation method can study the hydrodynamic properties of the ICFB, and the performance of the fluidized bed is optimized. The fluidization performance of the ICFB is improved through the experimental study of the cross-shaped baffle. Then, through the cross-shaped baffle and funnel-shaped baffle placement, the fluidized bed reaches a coupled optimization. The results show that CFD simulation technology can effectively improve the mass transfer efficiency and performance… More >

Kang Xu, Tong Li, Gaofei Guan, Jianlong Qu, Zhen Zhao, Xinsheng Xu^*

CMES-Computer Modeling in Engineering & Sciences, Vol.130, No.2, pp. 987-1002, 2022, DOI:10.32604/cmes.2022.018128

Abstract By means of the local surface nanocrystallization that enables to change the material on local positions, an innovative embedded multi-cell (EMC) thin-walled energy absorption structures with local surface nanocrystallization is proposed in this paper. The local surface nanacrystallization stripes are regarded as the moving morphable components in the domain for optimal design. Results reveal that after optimizing the local surface nanocrystallization layout, the specific energy absorption (SEA) is increased by 50.78% compared with the untreated counterpart. Besides, in contrast with the optimized 4-cell structure, the SEA of the nanocrystallized embedded 9-cell structure is further enhanced by 27.68%, in contrast with… More >

Hongling Ye^*, Zonghan Li, Nan Wei, Pengfei Su, Yunkang Sui

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.1, pp. 297-314, 2021, DOI:10.32604/cmes.2021.016133

Abstract Fatigue failure is a common failure mode under the action of cyclic loads in engineering applications, which often occurs with no obvious signal. The maximum structural stress is far below the allowable stress when the structures are damaged. Aiming at the lightweight structure, fatigue topology optimization design is investigated to avoid the occurrence of fatigue failure in the structural conceptual design beforehand. Firstly, the fatigue life is expressed by topology variables and the fatigue life filter function. The continuum fatigue optimization model is established with the independent continuous mapping (ICM) method. Secondly, fatigue life constraints are transformed to distortion energy… More >

Jianqiang Xiong^*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.3, pp. 555-567, 2021, DOI:10.32604/fdmp.2021.015429

Abstract A robust optimization design method is proposed to investigate the influence of the hook position on the vertical vibration (bending) of an automobile exhaust system. A block diagram for the robustness analysis of the exhaust system is initially constructed from the major affecting factors. Secondly, the second-order inertia force is set as the vibration excitation source of the exhaust system and the displacement of four hooks of the exhaust system is selected as the variable factor. Then tests are carried out to investigate the resulting vertical bending considering four influencing factors and three levels of analysis. Finally, a variance analysis… More >

Yujie Bao, Pincheng Wang^*, Yuhang Li

Journal of Information Hiding and Privacy Protection, Vol.2, No.3, pp. 143-154, 2020, DOI:10.32604/jihpp.2020.09759

Abstract When big trucks are running at urban road intersections, they are easy to interfere with other motor vehicles, and the turning big trucks are easy to have conflicts with non-motor vehicles and pedestrians, which will affect the safety of intersections. This paper first studied the intersection of trucks to the running trajectory, on this basis, through the establishment of mathematical model analysis of large truck steering conditions inside the wheel, and the influence of blind area to the driver. In the research of intersection safety design, the safety design is divided into three parts: Entrance road, internal operation and signal… More >

Jiejiang Zhu^{1, *}, Bolun Zhou¹

CMC-Computers, Materials & Continua, Vol.62, No.1, pp. 365-383, 2020, DOI:10.32604/cmc.2020.06655

Abstract The eagle strategy algorithm is combined with particle swarm optimization in this paper. The new algorithm, denoted as the ES-PSO, is implemented by interfacing Etabs structural analysis codes. ES-PSO is used to optimize the RC ribbed floor system, including floor and underground garage roof. By considering the effects of reinforcement, the principle of virtual work is applied to calculate the deflections of components. Construction cost is taken as the objective function and the constraint conditions are required to satisfy. Accordingly, the optimal layout, the optimal sections of the beams and slabs and the corresponding reinforcements are obtained for different column… More >

Zheng Juan^1,2,3, Long Shuyao^1,2, Xiong Yuanbo^1,2, Li Guangyao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.34, No.2, pp. 137-154, 2008, DOI:10.3970/cmes.2008.034.137

Abstract In this paper, the meshless radial point interpolation method (RPIM) is applied to carry out a topology optimization design for the continuum structure. Considering the relative density of nodes as a design variable, and the minimization of compliance as an objective function, the mathematical formulation of the topology optimization design is developed using the SIMP (solid isotropic microstructures with penalization) interpolation scheme. The topology optimization problem is solved by the optimality criteria method. Numerical examples show that the proposed approach is feasible and efficient for the topology optimization design for the continuum structure, and can effectively overcome the checkerboard phenomenon. More >