Lisheng Luo^1,*, Xinran Xie¹, Yongqiang Zhang¹, Xiaofeng Zhang², Xinyue Cui¹

Journal of Renewable Materials, Vol.11, No.2, pp. 791-809, 2023, DOI:10.32604/jrm.2022.022539 - 22 September 2022

Abstract Traditional methods focus on the ultimate bending moment of glulam beams and the fracture failure of materials with defects, which usually depends on empirical parameters. There is no systematic theoretical method to predict the stiffness and shear distribution of glulam beams in elastic-plastic stage, and consequently, the failure of such glulam beams cannot be predicted effectively. To address these issues, an analytical method considering material nonlinearity was proposed for glulam beams, and the calculating equations of deflection and shear stress distribution for different failure modes were established. The proposed method was verified by experiments and More > Graphic Abstract

Zongying Fu¹, Yongdong Zhou¹, Tingguo Yan², Yun Lu^1,*

Journal of Renewable Materials, Vol.11, No.1, pp. 93-102, 2023, DOI:10.32604/jrm.2023.021808 - 10 August 2022

Abstract Drying crack is a common phenomenon occurring during moisture discharge from wood, reducing efficient wood utilization. Drying crack is primarily caused by drying stress, and the reasonable methods for determining drying stress are sparse. In this study, the initiation and propagation of cracks during wood discs drying were simulated using the extended finite element method (XFEM). The distribution of drying stress and displacement was analyzed at different crack conditions based on the simulation results. This study aimed to solve the problem of the limitation of drying stress testing methods and provide a new idea for More >

Marcos Sanz-Ramos^1,2, Gonzalo Olivares², Ernest Bladé²

Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.38, No.1, pp. 1-12, 2022, DOI:10.23967/j.rimni.2022.03.012 - 29 March 2022

Abstract Permeable pavements are a common solution for wearing course layers in roads and urban areas. They are composed by highly porous materials with permeability several orders of magnitude above of the natural terrain. This work presents, on one hand, the experimental characterisation of the hydraulic behaviour of a permeable asphalt concrete wearing course layer and, on the other hand, the development and validation of a two-dimensional coupled hydraulic-hydrological distributed numerical model to reproduce the effect of the infiltration in the rainfall-runoff transformation and in the overland flow propagation processes. Experiments show linear and potential trends… More >

M. Li^1,2,*, D.H. Li³, Y. Rae¹, W. Sun¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.24, No.1, pp. 1-2, 2022, DOI:10.32604/icces.2022.08759

Abstract In order to better understand the physical process of deformation and cyclic softening a 12% Cr martensitic stainless steel FV566 has been cyclically tested at high temperature in strain control. Increase in temperature was found to increase the cyclic life, softening rate and viscous stress magnitude. An increase in the dwell time led to the acceleration of the material degradation. The microstructure changes and dominating deformation mechanisms were investigated by means of scanning electron microscopy, electron backscatter diffraction and transmission electron microscopy. The results have revealed a gradual sub-grain coarsening, transformation of lath structure into… More >

Xiang Rao^1,2,*, Yina Liu^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.131, No.3, pp. 1403-1429, 2022, DOI:10.32604/cmes.2022.018879 - 19 April 2022

Abstract Projection-based embedded discrete fracture model (pEDFM) is an effective numerical model to handle the flow in fractured reservoirs, with high efficiency and strong generalization of flow models. However, this paper points out that pEDFM fails to handle flow barriers in most cases, and identifies the physical projection configuration of fractures is a key step in pEDFM. This paper presents and proves the equivalence theorem, which explains the geometric nature of physical projection configurations of fractures, that is, the projection configuration of a fracture being physical is equivalent to it being topologically homeomorphic to the fracture, More >

Yatin Suri¹, Sheikh Zahidul Islam^{1, *}, Mamdud Hossain¹

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.2, pp. 297-337, 2020, DOI:10.32604/fdmp.2020.08421 - 21 April 2020

Abstract The distribution of proppant injected in hydraulic fractures significantly affects the fracture conductivity and well performance. The proppant transport in thin fracturing fluid used during hydraulic fracturing in the unconventional reservoirs is considerably different from fracturing fluids in the conventional reservoir due to the very low viscosity and quick deposition of the proppants. This paper presents the development of a threedimensional Computational Fluid Dynamics (CFD) modelling technique for the prediction of proppant-fluid multiphase flow in hydraulic fractures. The proposed model also simulates the fluid leak-off behaviour from the fracture wall. The Euler-Granular and CFD-Discrete Element… More >

D. O. Redchyts¹, E. A. Shkvar^{2, *}, S. V. Moiseienko³

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.1, pp. 91-103, 2020, DOI:10.32604/fdmp.2020.07933 - 01 February 2020

Abstract A method to evaluate the properties of turbulent flow in proximity to the vehicle and close to the ground surface has been elaborated. Numerical simulations have been performed on the basis of the Unsteady Reynolds-averaged Navier-Stokes equations (URANS) written with respect to an arbitrary curvilinear coordinate system. These equations have been solved using the Spalart-Allmaras differential one-parametric turbulence model. The method of artificial compressibility has been used to improve the coupling of pressure and velocity in the framework of a finite volume approach. Time-averaged distributions of pressure fields, velocity components, streamlines in the entire area… More >

Wajdi Zouari^1,*, Mustapha Assarar¹, Abderrazak Chilali², Rezak Ayad¹, Hocine Kebir³

Journal of Renewable Materials, Vol.7, No.9, pp. 839-853, 2019, DOI:10.32604/jrm.2019.06773

Abstract This contribution deals with the development of a three-node triangular plane finite element to analyze the transient hygroscopic behavior of 2/2 twill flax fabric-reinforced epoxy composite. Several plates of this material were fabricated using the vacuum infusion process and composite specimens were then cut and aged in tap water at room temperature until saturation. To simplify, a plane modelling of water diffusion in the aged specimens is adopted and Fick’s model is used to describe the water diffusion kinetics. To highlight the heterogeneity of the flax-epoxy samples, the twill flax fabrics waviness is modelled with More >

Tongyan Yue^1,2, Magd Abdel Wahab^3,4,*

CMC-Computers, Materials & Continua, Vol.59, No.2, pp. 405-432, 2019, DOI:10.32604/cmc.2019.04253

Abstract Fretting wear is a material damage in contact surfaces due to micro relative displacement between them. It causes some general problems in industrial applications, such as loosening of fasteners or sticking in components supposed to move relative to each other. Fretting wear is a complicated problem involving material properties of tribo-system and working conditions of them. Due to these various factors, researchers have studied the process of fretting wear by experiments and numerical modelling methods. This paper reviews recent literature on the numerical modelling method of fretting wear. After a briefly introduction on the mechanism More >

Vincenzo Gulizzi^1,2, Piervincenzo Rizzo^2,3, Alberto Milazzo⁴

Structural Durability & Health Monitoring, Vol.10, No.1, pp. 19-54, 2014, DOI:10.3970/sdhm.2014.010.019

Abstract The electromechanical impedance (EMI) method is one of the many nondestructive evaluation approaches proposed for the health monitoring of aerospace, civil, and mechanical structures. The method consists of attaching or embedding one or more wafer-type piezoelectric transducers (PZTs) to the system of interest, the host structure, and measuring certain electrical characteristics of the transducers. As these characteristics are also related to the impedance of the host structure, they can be used to infer the mechanical properties of the monitored structure. In the study presented in this paper, we utilize the EMI to monitor the quality… More >