M.A. Golberg¹, C.S. Chen²

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.1, pp. 87-96, 2001, DOI:10.3970/cmes.2001.002.087

Abstract The purpose of this paper is to develop a highly efficient mesh-free method for solving nonlinear diffusion-reaction equations in R^d, d=2, 3. Using various time difference schemes, a given time-dependent problem can be reduced to solving a series of inhomogeneous Helmholtz-type equations. The solution of these problems can then be further reduced to evaluating particular solutions and the solution of related homogeneous equations. Recently, radial basis functions have been successfully implemented to evaluate particular solutions for Possion-type equations. A more general approach has been developed in extending this capability to obtain particular solutions for Helmholtz-type equations by using polyharmonic spline… More >

John L. Junkins¹, Kamesh Subbarao², Ajay Verma³

CMES-Computer Modeling in Engineering & Sciences, Vol.1, No.4, pp. 99-118, 2000, DOI:10.3970/cmes.2000.001.551

Abstract Model reference adaptive control formulations are presented that rigorously impose the dynamical structure of the state space descriptions of several distinct large classes of dynamical systems. Of particular interest, the formulations enable the imposition of exact kinematic differential equation constraints upon the adaptation process that compensates for model errors and disturbances at the acceleration level. Other adaptive control formulations are tailored for redundantly actuated and constrained dynamical systems. The utility of the resulting structured adaptive control formulations is studied by considering examples from nonlinear oscillations, aircraft control, spacecraft control, and cooperative robotic system control. The theoretical and computational results provide… More >

B. Pichler¹, H.A. Mang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.1, No.3, pp. 43-55, 2000, DOI:10.3970/cmes.2000.001.345

Abstract In order to avoid a fully nonlinear analysis to obtain stability limits on nonlinear load-displacement paths, linear eigenvalue problems may be used to compute estimates of such limits. In this paper an asymptotic approach for assessment of the errors resulting from such estimates is presented. Based on the consistent linearization of the geometrically nonlinear static stability criterion – the so-called consistently linearized eigenvalue problem – higher-order estimation functions can be calculated. They are obtained from a scalar post-calculation performed after the solution of the eigenproblem. Different extensions of these higher-order estimation functions are presented. An ab initio criterion for the… More >

F. M. A. El-Saeidy¹

CMES-Computer Modeling in Engineering & Sciences, Vol.1, No.3, pp. 33-42, 2000, DOI:10.3970/cmes.2000.001.335

Abstract In rotating radial ball bearings supported on elastic casings with the bearing outer ring lightly fitted into the housing, the force due to the ball elastic contact is indeed a rotating load rolling over the housing. For accurate estimation of the dynamic deformations of the casing annulus (hole), which in turn affect the bearing tolerances and hence the magnitudes of the generated forces, effect of the load rotation (motion) should be considered. Considering the integral casing and the outer ring to be a plate, an isoparametric plane stress finite-element (FE) based analytical procedure is presented for the dynamic analysis of… More >

J.C. Michel¹, H. Moulinec, P. Suquet

CMES-Computer Modeling in Engineering & Sciences, Vol.1, No.2, pp. 79-88, 2000, DOI:10.3970/cmes.2000.001.239

Abstract An iterative numerical method based on Fast Fourier Transforms has been proposed by \cite{MOU98} to investigate the effective properties of periodic composites. This iterative method is based on the exact expression of the Green function for a linear elastic, homogeneous reference material. When dealing with linear phases, the number of iterations required to reach convergence is proportional to the contrast between the phases properties, and convergence is therefore not ensured in the case of composites with infinite contrast (those containing voids or rigid inclusions or highly nonlinear materials). It is proposed in this study to overcome this difficulty by using… More >

Igor Patlashenko¹, Dan Givoli²

CMES-Computer Modeling in Engineering & Sciences, Vol.1, No.2, pp. 61-70, 2000, DOI:10.3970/cmes.2000.001.221

Abstract The method of Absorbing Boundary Conditions (ABCs) is considered for the numerical solution of a class of nonlinear exterior wave scattering problems. Recently, a scheme based on the exact nonlocal Dirichlet-to-Neumann (DtN) ABC has been proposed for such problems. Although this method is very accurate, it is also highly expensive computationally. In this paper, the nonlocal ABC is replaced by a low-order local ABC, which is obtained by localizing the DtN condition in a certain "optimal'' way. The performance of the new local scheme is compared to that of the nonlocal scheme via numerical experiments in two dimensions. More >

Fernando A. Rochinha¹, Rubens Sampaio²

CMES-Computer Modeling in Engineering & Sciences, Vol.1, No.2, pp. 7-18, 2000, DOI:10.3970/cmes.2000.001.167

Abstract The dynamics of flexible systems, such as robot manipulators, mechanical chains or cables, is becoming increasingly important in engineering. The main question arising from the numerical modelling of large overall motions of multibody systems is an appropriate treatment for the large rotations. In the present work an alternative approach is proposed leading to a time-stepping numerical algorithm which achieves stable solutions combined with high precision. In particular, in order to check the performance of the proposed approach, two examples having preserved constants of the motion are presented. More >

Veturia Chiroiu¹, Ioan Ursu², Ligia Munteanu³, Tudor Sireteanu⁴

FDMP-Fluid Dynamics & Materials Processing, Vol.8, No.1, pp. 91-106, 2012, DOI:10.3970/fdmp.2011.008.091

Abstract The Kadomtsev-Petviashvili (KP) equation describes the evolution of nonlinear, long waves of small amplitude with slow dependence on the transverse coordinate. The KP equation coupled with the generalized play operator is studied in this paper in order to explain the dilatonic behavior of the soliton interaction and the generation of huge waves in shallow waters. Hirota bilinear method and results from a nonlinear semigroup theory are applied to simulate the resonant soliton interactions. More >

A. A. Nepomnyashchy^1,2, I. B. Simanovskii¹

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.3, pp. 185-198, 2008, DOI:10.3970/fdmp.2008.004.185

Abstract The development of instabilities under the joint action of the van der Waals forces and Marangoni stresses in a two-layer film on a heated or cooled substrate is considered. It is found that heating from below leads to the acceleration of the decomposition, decrease of the characteristic lateral size of structures, and the increase of the droplets heights. Heating from above leads to slowing down the instability rate and eventually to a complete suppression of the instability. More >

Priyankar Datta¹, Manas C. Ray¹

CMC-Computers, Materials & Continua, Vol.49-50, No.1, pp. 47-80, 2015, DOI:10.3970/cmc.2015.049.047

Abstract This paper deals with the implementation of the one dimensional form of the fractional order derivative constitutive relation for three dimensional analysis of active constrained layer damping (ACLD) of geometrically nonlinear laminated composite plates. The constraining layer of the ACLD treatment is composed of the vertically/obliquely reinforced 1–3 piezoelectric composites (PZCs). The von Kármán type nonlinear strain displacement relations are used to account for the geometric nonlinearity of the plates. A nonlinear smart finite element model (FEM) has been developed. Thin laminated substrate composite plates with various boundary conditions and stacking sequences are analyzed to verify the effectiveness of the… More >