Fengnan Guo^1,*, Yiming Li¹, Hua Zhang¹, Jianwei Cui²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.33, No.4, pp. 1-3, 2025, DOI:10.32604/icces.2025.011409

Abstract The stress intensity factor (SIF) is one of the most crucial parameters in fracture mechanics, as it can effectively characterize the state of the crack and determine its propagation behavior. The methods for evaluating the stress intensity factor mainly include the J-integral method, interaction integral method, and displacement extrapolation method [1,2]. However, the conventional J-integral and interaction integral methods involve derivative terms of material parameters, which cause a great difficulty in applying these methods to deal with non-homogeneous materials containing material interfaces. In order to overcome this difficulty, an improved interaction integral method has been… More >

F. S. Bayones¹, A. M. Abd-Alla², A. M. Farhan^3,4,*

CMC-Computers, Materials & Continua, Vol.68, No.3, pp. 3339-3352, 2021, DOI:10.32604/cmc.2021.016021 - 06 May 2021

Abstract The present article deals with the investigation thermal stress of a magnetothermoelastic cylinder subjected to rotation, open or closed circuit, thermal and mechanical boundary conditions. The outer and inner surfaces of the cylinder are subjected to both mechanical and thermal boundary conditions. A The transient coupled thermoelasticity in an infinite cylinder with its base abruptly exposed to a heat flux of a decaying exponential function of time is devised solve by the finite-difference method. The fundamental equations’ system is solved by utilizing an implicit finite-difference method. This current method is a second-order accurate in time… More >

A. Tadeu¹, P. Stanak², J. Antonio¹, J. Sladek², V. Sladek²

CMES-Computer Modeling in Engineering & Sciences, Vol.107, No.5, pp. 345-378, 2015, DOI:10.3970/cmes.2015.107.345

Abstract This paper implements a numerical method based on the mutual coupling of the boundary element method (BEM) and the meshless local Petrov-Galerkin (MLPG) method to simulate elastic wave propagation in fluid-filled boreholes. The fluid-solid interaction is solved in the frequency domain assuming longitudinally invariant geometry in the axial direction (2.5D formulation).
This model is used to assess the influence of the non-homogeneous material properties of a borehole wall that can be caused by a damaged zone, construction process or the ageing of material. The BEM is used to model propagation within the unbounded homogeneous domain… More >