N. Masood¹, A. M. Toufiq^2,*, S. Magam^3,4, S. M. W. Ali², M. T. Qureshi^3,*

Chalcogenide Letters, Vol.22, No.12, pp. 1047-1053, 2025, DOI:10.15251/CL.2025.2212.1047 - 08 December 2025

Abstract Self-assembled highly hierarchical novel SnS₂ microflowers having acute edge nanopetals have been fabricated using a facile template-free hydrothermal growth technique utilizing Tin (II) chloride dihydrate (SnCl₂·2H₂O) and Sodium sulfide nonahydrate (Na₂S·9H₂O) as reaction reagents. Morphological analysis exhibits the flower-type SnS₂ microarchitectures ranging from 4 to 7 μm. The vibrational mode measured at A_1g = 314 cm⁻¹ confirms the existence of hexagonal phase SnS₂ using Raman spectroscopy. The electrochemical results suggest the promise of as-synthesized SnS₂ structures as a cathodic material in lithium-sulfur batteries. More >

Hiba M. Ali^*, I. Khudayer

Chalcogenide Letters, Vol.20, No.3, pp. 197-203, 2023, DOI:10.15251/CL.2023.203.197

Abstract Silver selenide telluride Semiconducting (Ag₂Se_0.8Te_0.2) thin films were by thermal evaporation at RT with thickness350 nm at annealing temperatures (300, 348, 398, and 448) °K for 1 hour on glass substrates .using X-ray diffraction, the structural characteristics were calculated as a function of annealing temperatures with no preferential orientation along any plane. Atomic force microscopy (AFM) and X-ray techniques are used to analyze the Ag₂SeTe thin films' physical makeup and properties. AFM techniques were used to analyze the surface morphology of the Ag₂SeTe films, and the results showed that the values for average diameter, surface roughness, and More >

Abir Razzak^1,2, Faten Mannai¹, Ramzi Khiari^3,4,5, Younes Moussaoui^2,6, Mohamed N. Belgacem^5,*

Journal of Renewable Materials, Vol.10, No.10, pp. 2593-2606, 2022, DOI:10.32604/jrm.2022.021706 - 08 June 2022

Abstract The exploitation of biomass represents a major environmental challenge related to the protection of the environment and the progressive exhaust of fossil resources. In this perspective, the main objective of this work is the extraction and the characterization of natural lignocellulosic fibers from the Schinus molle. The cellulose fibre extraction was investigated employing conditions of alkali treatment. After the alkaline steps, a bleaching treatment was done and let to a yield about 45% pure cellulose. The identification of the chemical composition of Schinus molle reveals that this raw material contains a high level of biopolymers with a More >