Mingren Shao¹, Chunpeng Wang¹, Degui Wang¹, Wenbo Mei¹, Mingjie Li¹, Hao Yang^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.2, pp. 417-430, 2022, DOI:10.32604/fdmp.2022.018012 - 16 December 2021

Abstract Detailed information is provided for the design and construction of nitrogen drilling in a coal seam. Two prototype wells are considered. The Guo model is used to calculate the required minimum gas injection rate, while the Finnie, Sommerfeld, and Tulsa models are exploited to estimate the ensuing erosion occurring in pipe strings. The calculated minimum gas injection rates are 67.4 m³/min (with water) and 49.4 m³/min (without water), and the actual field of use is 90–120 m³/min. The difference between the calculated injection pressure and the field value is 6.5%–15.2% (formation with water) and 0.65%–7.32% (formation without More >

Xuejun Hou^1,2, Deli Gao^1,3, Zhonghou Shen¹

CMES-Computer Modeling in Engineering & Sciences, Vol.90, No.1, pp. 1-16, 2013, DOI:10.3970/cmes.2013.090.001

Abstract Diesel tail gas drilling (DTGD) is a type of gas drilling, which uses diesel tail gas (DTG) as a circulating medium. Its cost is slightly higher than that of air drilling, but is cheaper than those of nitrogen drilling and natural gas drilling. When the reservoir is drilled with DTG, just as nitrogen and natural gas, the DTG will prevent the burning and blasting of oil and gas in the bottom hole. In order to reduce costs, the DTG is often used in drilling the reservoir, to prevent the underground explosion. This paper analyzes the… More >