Yanpu Chao^1,*, Fulai Cao¹, Hao Yi^2,3,*, Shuai Lu¹, Yaohui Li¹, Hui Cen¹

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.11, pp. 2489-2508, 2024, DOI:10.32604/fdmp.2024.051962 - 28 October 2024

Abstract The so-called fourth-generation biodegradable vascular stent has become a research hotspot in the field of bio-engineering because of its good degradation ability and drug-loading characteristics. However, the preparation of polymer-degraded vascular stents is affected by known problem such as poor process flexibility, low forming accuracy, large diameter wall thickness, limited complex pore structure, weak mechanical properties of radial support and high process cost. In this study, a deposition technique based on a high-voltage electric-field-driven continuous rotating jet is proposed to fabricate fully degraded polymer vascular stents. The experimental results show that, due to the rotation… More > Graphic Abstract

Bing Liu¹, Yikun Chen¹, Huachen Liu¹, Qiao Wu¹, Minghui Wang¹, Jianlong Wan^2,*

Energy Engineering, Vol.119, No.2, pp. 815-826, 2022, DOI:10.32604/ee.2022.017988 - 24 January 2022

Abstract The operating range of the flow rate or flow velocity for the micro-jet flame is quite wide, which can be used as the heat source. In order to optimize the micro-jet tube combustor in terms of the solid material, the present paper numerically investigates the impact of thermal conductivity (λ_s) on the operating limit of micro-jet flame. Unexpectedly, the non-monotonic blow-off limits with the increase of λ_s is found, and the corresponding generation mechanisms are analyzed in terms of the thermal coupling effect, flow field, and strain effect. At first, the lower preheating temperature of the More >