Muhammad Imran¹, Jinsheng Sun^1,*, Fatima Sehar Zaidi², Zameer Abbas^3,4, Hafiz Zafar Nazir⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.2, pp. 1207-1257, 2023, DOI:10.32604/cmes.2023.025492 - 06 February 2023

Abstract Control charts (CCs) are one of the main tools in Statistical Process Control that have been widely adopted in manufacturing sectors as an effective strategy for malfunction detection throughout the previous decades. Measurement errors (M.E’s) are involved in the quality characteristic of interest, which can effect the CC’s performance. The authors explored the impact of a linear model with additive covariate M.E on the multivariate cumulative sum (CUSUM) CC for a specific kind of data known as compositional data (CoDa). The average run length is used to assess the performance of the proposed chart. The… More >

Guangzheng Yu^1,*, Yu Liu^1,2, Bosun Xie¹, Huali Zhou¹

Sound & Vibration, Vol.53, No.4, pp. 151-159, 2019, DOI:10.32604/sv.2019.04644

Abstract To accelerate head-related transfer functions (HRTFs) measurement, two or more independent sound sources are usually employed in the measurement system. However, the multiple scattering between adjacent sound sources may influence the accuracy of measurement. On the other hand, the directivity of sound source could induce measurement error. Therefore, a model consisting of two spherical sound sources with approximate omni-directivity and a rigid-spherical head is proposed to evaluate the errors in HRTF measurement caused by multiple scattering between sources. An example of analysis using multipole re-expansion indicates that the error of ipsilateral HRTFs are within the More >

Ru-Min Chao, Yen-Ji Chen, F.C. Lin¹

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.1, pp. 73-86, 2001, DOI:10.3970/cmes.2001.002.073

Abstract The two-dimensional elasticity problem of an isotropic material, containing a centered-crack with unknown boundary traction is studied by the inverse procedure. The dual boundary integral equations are used to analyze the problem. While solving the ill-posed inverse problem, both of the conjugate gradient method and the regularization method are used. A scaling factor depending upon the material constant μ is introduced into the sensitivity matrix in order to keep the order of magnitude the same throughout the formulation. The result by using the displacement measurement will be compared with those by stress measurement, and an extensive More >