Ji Zhou^1,2, Yijun Lu³, Qiong Tian^1,2, Haichuan Liu³, Mahdi Hasanipanah^4,5,*, Jiandong Huang^3,*

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.2, pp. 1595-1617, 2024, DOI:10.32604/cmes.2024.048398

Abstract Blasting in surface mines aims to fragment rock masses to a proper size. However, flyrock is an undesirable effect of blasting that can result in human injuries. In this study, support vector regression (SVR) is combined with four algorithms: gravitational search algorithm (GSA), biogeography-based optimization (BBO), ant colony optimization (ACO), and whale optimization algorithm (WOA) for predicting flyrock in two surface mines in Iran. Additionally, three other methods, including artificial neural network (ANN), kernel extreme learning machine (KELM), and general regression neural network (GRNN), are employed, and their performances are compared to those of four More >

Junjie Zhao, Diyuan Li^*, Jingtai Jiang, Pingkuang Luo

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 275-304, 2024, DOI:10.32604/cmes.2024.046960

Abstract Traditional laboratory tests for measuring rock uniaxial compressive strength (UCS) are tedious and time-consuming. There is a pressing need for more effective methods to determine rock UCS, especially in deep mining environments under high in-situ stress. Thus, this study aims to develop an advanced model for predicting the UCS of rock material in deep mining environments by combining three boosting-based machine learning methods with four optimization algorithms. For this purpose, the Lead-Zinc mine in Southwest China is considered as the case study. Rock density, P-wave velocity, and point load strength index are used as input variables,… More > Graphic Abstract

Ghulam Gilanie^1,*, Sana Cheema¹, Akkasha Latif¹, Anum Saher¹, Muhammad Ahsan¹, Hafeez Ullah², Diya Oommen³

Intelligent Automation & Soft Computing, Vol.39, No.1, pp. 57-71, 2024, DOI:10.32604/iasc.2024.041535

Abstract Bipolar disorder is a serious mental condition that may be caused by any kind of stress or emotional upset experienced by the patient. It affects a large percentage of people globally, who fluctuate between depression and mania, or vice versa. A pleasant or unpleasant mood is more than a reflection of a state of mind. Normally, it is a difficult task to analyze through physical examination due to a large patient-psychiatrist ratio, so automated procedures are the best options to diagnose and verify the severity of bipolar. In this research work, facial micro-expressions have been… More >

S. Prakash^1,*, P. Vishnu Raja², A. Baseera³, D. Mansoor Hussain⁴, V. R. Balaji⁵, K. Venkatachalam⁶

Computer Systems Science and Engineering, Vol.42, No.3, pp. 1273-1287, 2022, DOI:10.32604/csse.2022.021784

Abstract Urban living in large modern cities exerts considerable adverse effects on health and thus increases the risk of contracting several chronic kidney diseases (CKD). The prediction of CKDs has become a major task in urbanized countries. The primary objective of this work is to introduce and develop predictive analytics for predicting CKDs. However, prediction of huge samples is becoming increasingly difficult. Meanwhile, MapReduce provides a feasible framework for programming predictive algorithms with map and reduce functions. The relatively simple programming interface helps solve problems in the scalability and efficiency of predictive learning algorithms. In the… More >

Mamdouh El Haj Assad¹, Ibrahim Mahariq², Raymond Ghandour², Mohammad Alhuyi Nazari³, Thabet Abdeljawad^4,5,6,*

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 361-374, 2022, DOI:10.32604/cmc.2022.019048

Abstract Nanofluids are extensively applied in various heat transfer mediums for improving their heat transfer characteristics and hence their performance. Specific heat capacity of nanofluids, as one of the thermophysical properties, performs principal role in heat transfer of thermal mediums utilizing nanofluids. In this regard, different studies have been carried out to investigate the influential factors on nanofluids specific heat. Moreover, several regression models based on correlations or artificial intelligence have been developed for forecasting this property of nanofluids. In the current review paper, influential parameters on the specific heat capacity of nanofluids are introduced. Afterwards, More >

Ibrahim B.M. Taha¹, Diaa-Eldin A. Mansour^2,*

Intelligent Automation & Soft Computing, Vol.28, No.3, pp. 739-752, 2021, DOI:10.32604/iasc.2021.017703

Abstract Power transformer is one of the more important components of electrical power systems. The early detection of transformer faults increases the power system reliability. Dissolved gas analysis (DGA) is one of the most favorite approaches used for power transformer fault prediction due to its easiness and applicability for online diagnosis. However, the imbalanced, insufficient and overlap of DGA dataset impose a challenge towards powerful and accurate diagnosis. In this work, a novel fault diagnosis for power transformers is introduced based on DGA by using data transformation and six optimized machine learning (OML) methods. Four data… More >

Marius Becherer^∗, Michael Zipperle^†, Achim Karduck^‡

Computer Systems Science and Engineering, Vol.35, No.2, pp. 81-89, 2020, DOI:10.32604/csse.2020.35.081

Abstract Machines are serviced too often or only when they fail. This can result in high costs for maintenance and machine failure. The trend of Industry 4.0 and the networking of machines opens up new possibilities for maintenance. Intelligent machines provide data that can be used to predict the ideal time of maintenance. There are different approaches to create a forecast. Depending on the method used, appropriate conditions must be created to improve the forecast. In this paper, results are compiled to give a state of the art of predictive maintenance. First, the different types of More >

PCD Kalaivaani^1,*, Dr. R Thangarajan²

Intelligent Automation & Soft Computing, Vol.26, No.1, pp. 71-79, 2020, DOI:10.31209/2019.100000152

Abstract Web mining is the process of integrating the information from web by traditional data mining methodologies and techniques. Opinion mining is an application of natural language processing to extract subjective information from web. Online reviews require efficient classification algorithms for analysing the sentiments, which does not perform an in–depth analysis in current methods. Sentiment classification is done at document level in combination with topics and sentiments. It is based on weakly supervised Joint Sentiment-Topic mode which extends the topic model Maximum Entropy Discrimination Latent Dirichlet Allocation by constructing an additional sentiment layer. It is assumed More >

Minshan Li^1,3, Dongchuan Mo^2,3*, Shushen Lyu^2,3*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.22, No.3, pp. 165-165, 2019, DOI:10.32604/icces.2019.05510

Abstract In the past few years, machine learning algorithms and models have shown great power in the emerging field of data mining and artificial intelligence, attracting a great deal of attention. Given specific learning task and training data set, a machine learning model can improve automatically through training and can help people make decisions and predictions. To date, a lot of advanced machine learning algorithms and theories have been proposed and developed, including random forest, support vector machine, artificial neural network, deep learning and so on. Well-chosen and well-trained machine learning model is proved to have… More >

Maha Al-Yahya^{1, *}

CMC-Computers, Materials & Continua, Vol.60, No.2, pp. 421-433, 2019, DOI:10.32604/cmc.2019.06209

Abstract The purpose of this study is to evaluate the performance of five supervised machine learning methods for the task of automated genre identification of classical Arabic texts using text most frequent words as features. We design an experiment for comparing five machine-learning methods for the genre identification task for classical Arabic text. We set the data and the stylometric features and vary the classification method to evaluate the performance of each method. Of the five machine learning methods tested, we can conclude that Support Vector Machine (SVM) are generally the most effective. The contribution of More >