Mohammad Javad SheikhMozafari^*

Sound & Vibration, Vol.58, pp. 81-100, 2024, DOI:10.32604/sv.2024.048897 - 27 February 2024

Abstract Mitigating low-frequency noise poses a significant challenge for acoustic engineers, due to their long wavelength, with conventional porous sound absorbers showing limitations in attenuating such noise. An effective strategy involves combining porous materials with micro-perforated plates (MPP) to address this issue. Given the significant impact of structural variables like panel thickness, hole diameter, and air gap on the acoustic characteristics of MPP, achieving the optimal condition demands numerous sample iterations. The impedance tube’s considerable expense for sound absorption measurement and the substantial cost involved in fabricating each sample using a 3D printer underscore the advantage… More > Graphic Abstract

Hadi Negahdari¹, Sirus Javadpour^2,*, Faramarz Moattar³

Sound & Vibration, Vol.54, No.4, pp. 237-246, 2020, DOI:10.32604/sv.2020.011086 - 25 November 2020

Abstract Today, analyzing of sound pressure level and frequency is considered as an important index in human society. Sound experts believe that analyzing of these parameters can help us to better understanding of work environments. Sound measurements and frequency analysis did to fix the harmful frequency in all sections in Shiraz gas power plant with sound analyzer model BSWA 308. The sound pressure levels (L_P) and the one and one-third octave band were continuously measured in A and C weighting networks and slow mode for time response. Excel 2013 and Minitab 18.1 software used for statistical calculations.… More >

Ilze Beverte^1,*, Vairis Shtrauss¹, Aldis Kalpinsh¹, Uldis Lomanovskis¹, Ugis Cabulis², Irina Sevastyanova², Sergejs Gaidukovs³

Journal of Renewable Materials, Vol.8, No.9, pp. 1151-1170, 2020, DOI:10.32604/jrm.2020.010215 - 03 August 2020

Abstract Early investigations of dielectric permittivity of rigid polyurethane foams at low frequencies were made on petrochemical-origin foams, mainly by means of parallel plate capacitors. In the present investigation biopolyol was synthesized from Latvia-grown rapeseeds’ oil by the transesterification method with triethanolamine, in an environmentally friendly process, without emission of harmful substances, at temperatures 175°C ± 5°C. Rigid, closed-cell rapeseed oil polyol polyurethane biofoams and petrochemical foams were made ensuring content of the renewable rapeseed oil polyol in ready foams 27 wt.%–29 wt.%. Dielectric permittivity of the polyurethane foams and the underlying monolithic petrochemical-origin polyurethane and… More >