Abdul Sattar Laghari¹, Mohammad Waqas Chandio¹, Laveet Kumar^2,*, Mamdouh El Haj Assad³

Energy Engineering, Vol.121, No.8, pp. 2023-2038, 2024, DOI:10.32604/ee.2024.051082

Abstract The selection of working fluid significantly impacts the geothermal ORC’s Efficiency. Using a mixture as a working fluid is a strategy to improve the output of geothermal ORC. In the current study, modelling and thermodynamic analysis of ORC, using geothermal as a heat source, is carried out at fixed operating conditions. The model is simulated in the Engineering Equation Solver (EES). An environment-friendly mixture of fluids, i.e., R245fa/R600a, with a suitable mole fraction, is used as the operating fluid. The mixture provided the most convenient results compared to the pure working fluid under fixed operating More >

Rachedi Khadraoui¹, Latra Boumaraf^1,*, Philippe Haberschill²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.5, pp. 1115-1128, 2023, DOI:10.32604/fdmp.2022.022674

Abstract A theoretical investigation is presented about a double evaporator ejector refrigeration cycle (DEERC). Special attention is paid to take into account the influence of the sub-cooling and superheating effects induced by an internal heat exchanger (IHX). The ejector is introduced into the baseline cycle in order to mitigate the throttling process losses and increase the compressor suction pressure. Moreover, the IHX has the structure of a concentric counter-flow type heat exchanger and is intentionally used to ensure that the fluid at the compressor inlet is vapor. To assess accurately the influence of the IHX on More > Graphic Abstract