Aadel M. Alatwi^1,2, Abualkasim Bakeer³, Sherif A. Zaid^1,*, Ibrahem E. Atawi¹, Hani Albalawi^1,4, Ahmed M. Kassem⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.2, pp. 1807-1830, 2024, DOI:10.32604/cmes.2024.048521 - 20 May 2024

Abstract An autonomous microgrid that runs on renewable energy sources is presented in this article. It has a superconducting magnetic energy storage (SMES) device, wind energy-producing devices, and an energy storage battery. However, because such microgrids are nonlinear and the energy they create varies with time, controlling and managing the energy inside them is a difficult issue. Fractional-order proportional integral (FOPI) controller is recommended for the current research to enhance a standalone microgrid’s energy management and performance. The suggested dedicated control for the SMES comprises two loops: the outer loop, which uses the FOPI to regulate… More >

S. Jayaprakash^1,*, B. Gopi², Murugananth Gopal Raj³, S. Sujith⁴, S. Deepa⁵, S. Swapna⁶

Computer Systems Science and Engineering, Vol.45, No.3, pp. 2537-2551, 2023, DOI:10.32604/csse.2023.032038 - 21 December 2022

Abstract The introduction of several small and large-scale industries, malls, shopping complexes, and domestic applications has significantly increased energy consumption. The aim of the work is to simulate a technically viable and economically optimum hybrid power system for residential buildings. The proposed micro-grid model includes four power generators: solar power, wind power, Electricity Board (EB) source, and a Diesel Generator (DG) set, with solar and wind power performing as major sources and the EB supply and DG set serving as backup sources. The core issue in direct current to alternate current conversion is harmonics distortion, a… More >

Fangwei Zhang^1,2,*, Shihe Xu³, Bing Han⁴, Liming Zhang², Jun Ye⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.134, No.3, pp. 2211-2226, 2023, DOI:10.32604/cmes.2022.022418 - 20 September 2022

Abstract In optimization theory, the adaptive control of the optimization process is an important goal that people pursue. To solve this problem, this study introduces the idea of neutrosophic decision-making into classical heuristic algorithm, and proposes a novel neutrosophic adaptive clustering optimization thought, which is applied in a novel neutrosophic genetic algorithm (NGA), for example. The main feature of NGA is that the NGA treats the crossover effect as a neutrosophic fuzzy set, the variation ratio as a structural parameter, the crossover effect as a benefit parameter and the variation effect as a cost parameter, and More >

Inayet Hakki Cizmeci^1,*, Adem Alpaslan Altun²

Intelligent Automation & Soft Computing, Vol.35, No.3, pp. 2555-2572, 2023, DOI:10.32604/iasc.2023.028851 - 17 August 2022

Abstract Studies have established that hybrid models outperform single models. The particle swarm algorithm (PSO)-based PID (proportional-integral-derivative) controller control system is used in this study to determine the parameters that directly impact the speed and performance of the Electro Search (ESO) algorithm to obtain the global optimum point. ESPID algorithm was created by integrating this system with the ESO algorithm. The improved ESPID algorithm has been applied to 7 multi-modal benchmark test functions. The acquired results were compared to those derived using the ESO, PSO, Atom Search Optimization (ASO), and Vector Space Model (VSM) algorithms. As More >

Xi Wang^*, Guangping Zeng

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.3, pp. 563-576, 2022, DOI:10.32604/fdmp.2022.017884 - 22 February 2022

Abstract An efficient and versatile intelligent algorithm is developed for the control of the cabin environment of wind power generators. The method can be used to monitor and solve wind power generation problems at the same time. It also provides several advantages with respect to other traditional methods which imply significant workload and maintenance personnel. The functional requirements of the intelligent control system are analyzed, and a control algorithm for the stepping motor is selected and evaluated. Through the comparative analysis of the active power and internal temperature curve for three kinds of output power of More >

R. Manikandan^1,*, G. Ranganathan², V. Bindhu³

Intelligent Automation & Soft Computing, Vol.33, No.1, pp. 173-189, 2022, DOI:10.32604/iasc.2022.023922 - 05 January 2022

Abstract This paper presents development and analysis of different control strategies for smart automated system. The dynamic role of an electrical motor and sensor interfacing with wireless module becomes an essential element in a smart agriculture system to monitor various environmental parameters. The various key parameters such as temperature, humidity, air pressure, soil health and solar radiation are widely used to analyze the growth of plants and soil health based on different climate conditions. However, the smart development of an automatic system to measure these vital parameters provides a feasible approach and helps the farmers to… More >

V. Vijayal^1,*, K. Krishnamoorthi²

Intelligent Automation & Soft Computing, Vol.33, No.1, pp. 651-667, 2022, DOI:10.32604/iasc.2022.023890 - 05 January 2022

Abstract In high power medium voltage applications, the utilization of 5-H Bridge Multi-Level Inverter (MLI) has grown vastly in recent years. The 5-H Bridge MLI can effectively control link voltage as well as power factor. However, the inverter imparts harmonics owing to the high switching frequency. Hence Inductance Capacitance Inductance (LCL) filter is implemented at its output to mitigate harmonics in presence of non-linear load. It’s of highly important to choose LCL parameters wisely in order to attain good filtering effect. This work investigates the application of 5-H Bridge MLI with LCL filter at the output… More >

Lei Zhang¹, Yinlong Yuan^1,*, Yihe Sun², Yun Cheng¹, Dian Wu¹, Lei Ren¹

Energy Engineering, Vol.119, No.1, pp. 387-405, 2022, DOI:10.32604/EE.2022.017463 - 22 November 2021

Abstract With the aggravation of energy problems, the development and utilization of new energy has become the focus of all countries. As an effective new energy, the fuel cell has attracted the attention of scholars. However, due to the particularity of proton exchange membrane fuel cell (PEMFC), the performance of traditional PI controlled phase-shifted full-bridge power electronics DC-DC converter cannot meet the needs of practical application. In order to further improve the dynamic performance of the converter, this paper first introduces several main topologies of the current mainstream front-end DC-DC converter, and analyzes their performance in… More >

Lu Wang^1,2, Yulong Guo², Jianbin Liang^3,*, Haitao Tian⁴

Energy Engineering, Vol.117, No.6, pp. 471-480, 2020, DOI:10.32604/EE.2020.011131 - 16 October 2020

Abstract The increasingly severe global energy crisis has brought great challenges to the energy field, and renewable energy power generation system has been widely concerned because of its characteristics of green and inexhaustible. However, renewable energy also has some limitations in its specific application, and affects the grid-connected power generation of new energy. In this paper, based on the background of photovoltaic power station, the intelligent energy storage control method for single inverter is put forward to assist a single inverter, and the DC component of fluctuating power is extracted by using the moving average function; More >

Fecir Duran¹, Mustafa Teke²

Intelligent Automation & Soft Computing, Vol.25, No.3, pp. 441-449, 2019, DOI:10.31209/2018.11006161

Abstract Ultrasonic cleaners are devices that perform ultrasonic cleaning by using ultrasonic converters. Ultrasonic cleaners have been employed to clean dirty and rusty materials such as optic, jewelers, automotive and dental prosthesis sectors. Due to non-identified correctly cleaning time, cavitation erosion has been occurred at some materials, which desire for cleaning. In this study, an intelligent cleaning device that runs autonomously identified cleaning time, saves energy, and makes the cleaning process safely has been designed and implemented. An ultrasonic cleaning time has been adjusted automatically by monitoring of turbidity and conductivity values of liquid that is More >