Honghong Wang¹, Zhixin Xiong^1,*, Yunchao Hu¹, Zhijian Liu¹, Long Liang²

Journal of Renewable Materials, Vol.11, No.6, pp. 2713-2727, 2023, DOI:10.32604/jrm.2023.025817

Abstract This study aims to realize the sharing of near-infrared analysis models of lignin and holocellulose content in pulp wood on two different batches of spectrometers and proposes a combined algorithm of SPA-DS, MCUVE-DS and SiPLS-DS. The Successive Projection Algorithm (SPA), the Monte-Carlo of Uninformative Variable Elimination (MCUVE) and the Synergy Interval Partial Least Squares (SiPLS) algorithms are respectively used to reduce the adverse effects of redundant information in the transmission process of the full spectrum DS algorithm model. These three algorithms can improve model transfer accuracy and efficiency and reduce the manpower and material consumption required for modeling. These results… More >

Muhammad Aadil Siddiqui^1,*, M. H. Md Khir¹, Zaka Ullah², Muath Al Hasan², Abdul Saboor³, Saeed Ahmed Magsi¹

CMC-Computers, Materials & Continua, Vol.75, No.2, pp. 2859-2871, 2023, DOI:10.32604/cmc.2023.034164

Abstract One of the most pressing concerns for the consumer market is the detection of adulteration in meat products due to their preciousness. The rapid and accurate identification mechanism for lard adulteration in meat products is highly necessary, for developing a mechanism trusted by consumers and that can be used to make a definitive diagnosis. Fourier Transform Infrared Spectroscopy (FTIR) is used in this work to identify lard adulteration in cow, lamb, and chicken samples. A simplified extraction method was implied to obtain the lipids from pure and adulterated meat. Adulterated samples were obtained by mixing lard with chicken, lamb, and… More >

Imran Ali¹, Zohaib Mushtaq², Saad Arif³, Abeer D. Algarni^4,*, Naglaa F. Soliman⁴, Walid El-Shafai^5,6

Computer Systems Science and Engineering, Vol.46, No.1, pp. 303-319, 2023, DOI:10.32604/csse.2023.034374

Abstract Hyperspectral imaging is gaining a significant role in agricultural remote sensing applications. Its data unit is the hyperspectral cube which holds spatial information in two dimensions while spectral band information of each pixel in the third dimension. The classification accuracy of hyperspectral images (HSI) increases significantly by employing both spatial and spectral features. For this work, the data was acquired using an airborne hyperspectral imager system which collected HSI in the visible and near-infrared (VNIR) range of 400 to 1000 nm wavelength within 180 spectral bands. The dataset is collected for nine different crops on agricultural land with a spectral… More >

Ibrahim M. Almanjahie^1,2,*, Omar Fetitah³, Mohammed Kadi Attouch³, Tawfik Benchikh^3,4

CMC-Computers, Materials & Continua, Vol.74, No.3, pp. 6307-6319, 2023, DOI:10.32604/cmc.2023.033441

Abstract Functional statistics is a new technique for dealing with data that can be viewed as curves or images. Parallel to this approach, the Near-Infrared Reflectance (NIR) spectroscopy methodology has been used in modern chemistry as a rapid, low-cost, and exact means of assessing an object’s chemical properties. In this research, we investigate the quality of corn and cookie dough by analyzing the spectroscopic technique using certain cutting-edge statistical models. By analyzing spectral data and applying functional models to it, we could predict the chemical components of corn and cookie dough. Kernel Functional Classical Estimation (KFCE), Kernel Functional Quantile Estimation (KFQE),… More >

Tobias Drieschner^1,2,*, Andreas Kandelbauer¹, Bernd Hitzmann², Karsten Rebner¹

Journal of Renewable Materials, Vol.11, No.4, pp. 1643-1660, 2023, DOI:10.32604/jrm.2023.024429

Abstract For optimization of production processes and product quality, often knowledge of the factors influencing the process outcome is compulsory. Thus, process analytical technology (PAT) that allows deeper insight into the process and results in a mathematical description of the process behavior as a simple function based on the most important process factors can help to achieve higher production efficiency and quality. The present study aims at characterizing a well-known industrial process, the transesterification reaction of rapeseed oil with methanol to produce fatty acid methyl esters (FAME) for usage as biodiesel in a continuous micro reactor set-up. To this end, a… More >

Yuanjia Xia, Fang Zhao^*, Zhizun Li, Zhaogang Cheng, Jianwei Hu

Journal of Renewable Materials, Vol.11, No.2, pp. 921-936, 2023, DOI:10.32604/jrm.2022.022840

Abstract Sn_1−xEr_xO₂ (x = 0%, 8%, 16%, 24%) micro/nanofibers were prepared by electrospinning combined with heat treatment using erbium nitrate, stannous chloride and polyvinylpyrrolidone (PVP) as raw materials. The target products were characterized by thermogravimetric analyzer, X-ray diffrotometer, fourier transform infrared spectrometer, scanning electron microscope, spectrophotometer and infrared emissivity tester, and the effects of Er³⁺ doping on its infrared and laser emissivity were studied. At the same time, the Sn_1−xEr_xO₂ (x = 0%, 16%) doping models were constructed based on the first principles of density functional theory, and the related optoelectronic properties such as their energy band structure, density of states,… More >

Rui Wang, Lanlan Shi, Yurong Wang^*

Journal of Renewable Materials, Vol.10, No.12, pp. 3285-3302, 2022, DOI:10.32604/jrm.2022.020546

Abstract Air-dry density, modulus of rupture (MOR), modulus of elasticity (MOE), compressive strength parallel to grain, and hardness of Catalpa bungei clones were investigated in this study with feasibility of predicting these properties by near-infrared (NIR) spectroscopy. The best candidate ‘Luoqiu 3’ has been selected from three clones based on wood physical and mechanical property indices. Lower values of wood physical and mechanical properties have been found in the corewood compared to the outerwood. There were significant positive correlations between the air-dry density and mechanical properties. Information from cross section for air-dry density, compressive strength parallel to grain, and hardness yielded… More >

Naglaa F. Soliman^1,2, E. A. Alabdulkreem³, Abeer D. Algarni^1,*, Ghada M. El Banby⁴, Fathi E. Abd El-Samie^1,5, Ahmed Sedik⁶

CMC-Computers, Materials & Continua, Vol.72, No.2, pp. 2545-2563, 2022, DOI:10.32604/cmc.2022.020107

Abstract For military warfare purposes, it is necessary to identify the type of a certain weapon through video stream tracking based on infrared (IR) video frames. Computer vision is a visual search trend that is used to identify objects in images or video frames. For military applications, drones take a main role in surveillance tasks, but they cannot be confident for long-time missions. So, there is a need for such a system, which provides a continuous surveillance task to support the drone mission. Such a system can be called a Hybrid Surveillance System (HSS). This system is based on a distributed… More >

Jiancheng Zou¹, Jiaxin Li^1,*, Juncun Wei¹, Zhengzheng Li¹, Xin Yang²

Journal on Artificial Intelligence, Vol.3, No.3, pp. 123-134, 2021, DOI:10.32604/jai.2021.027069

Abstract Facial expression recognition is a research hot spot in the fields of computer vision and pattern recognition. However, the existing facial expression recognition models are mainly concentrated in the visible light environment. They have insufficient generalization ability and low recognition accuracy, and are vulnerable to environmental changes such as illumination and distance. In order to solve these problems, we combine the advantages of the infrared and visible images captured simultaneously by array equipment our developed with two infrared and two visible lens, so that the fused image not only has the texture information of visible image, but also has the… More >

J. Haritha^1,*, R. S. Valarmathi², M. Kalamani³

Intelligent Automation & Soft Computing, Vol.32, No.3, pp. 1867-1880, 2022, DOI:10.32604/iasc.2022.022547

Abstract Urea is the most common fertilizer used by the farmers. In this study, the variation of mid-infrared transmittance spectra with addition of urea in soil was studied for five different concentrations of urea. 150 gm of soil is taken and dried in a hot air oven for 5 h at 80°C and then samples are prepared by adding urea and water to it. The spectral signature of soil with urea is obtained by using an Infrared Spectrometer that reads the spectra in the mid infra-red region. The analysis is done using Partial Least Square Regression and Support Vector Machine algorithms… More >