Xuejun Tian, Jianliang Li, Lihua Luo

Computer Systems Science and Engineering, Vol.33, No.5, pp. 317-326, 2018, DOI:10.32604/csse.2018.33.317

Abstract In this paper, the wireless network communication system based on ZigBee protocol is design using CC2530 chip as the processor together with front-end CC2530. In the system, the temperature and humidity information collected by DHTII temperature and humidity sensor is gathered and processed by CC2530 chip; the data of temperature and humidity sent back by the receiving nodes of main module will be sent to the upper compouter by serial assistant; then the upper computer recieves and displays the data so that users can check them conveniently. The application of the aforementioned ZigBee wireless communication technology in greenhouse is quite… More >

J. Serrano-Arellano¹, J. M. Belman-Flores^2,*, I. Hernández-Pérez³, K. M. Aguilar-Castro³, E. V. Macías-Melo³, F. Elizalde-Blancas², J. M. Riesco-Ávila², F. J. García-Rodríguez⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.123, No.2, pp. 571-602, 2020, DOI:10.32604/cmes.2020.08677

Abstract In the present study, an analysis of the heat and mass transfer in a ventilated cavity in a warm climate zone was carried out to analyze, among others, the temperatures and percentage of relative humidity (RH). The governing equations of the mathematical model were solved through the finite volume method. We used the k-ε turbulence mode to find the results of the variables of interest in seven climate records on a given day. The velocity of the inlet flow of the air-H₂O mixture was varied through the Reynolds number (Re) from 500 to 10000. The outdoor weather conditions considered were… More >

Astiz V¹, LF Hernández^2,3

Phyton-International Journal of Experimental Botany, Vol.82, pp. 297-302, 2013, DOI:10.32604/phyton.2013.82.297

Abstract During microsporogenesis, sunflower florets might be exposed to episodes of day- and night-time temperatures exceeding 30 and 20 °C, respectively, that can affect pollen availability and consequently plant’s yield. The relationship between air temperature and relative humidity during the meiotic phase of microsporogenesis, and the quantity and quality of pollen produced by the flowers, were studied in two sunflower hybrids during two years. The hybrids were grown on irrigated plots in Bahía Blanca (38° 45’ S; 62° 11’ W) in three planting dates (PD) at a density of 5.6 plants/m2. Flowers were consecutively taken as anthesis progressed, sectorizing the capitulum… More >

Q. Chen, K. Kariya

The International Conference on Computational & Experimental Engineering and Sciences, Vol.16, No.1, pp. 3-4, 2011, DOI:10.3970/icces.2011.016.003

Abstract Abstract Al alloys have been widely used as engineering materials in many machines and structures because of their excellent properties such as high specific strength, high resistance to corrosion and easy to recycle. Especially, high strength Al alloys are effective to reduce environment load through achieving low fuel consumption in automobile engines. On the other hand, high strength Al alloys have no definite fatigue limit and their fatigue strengths are very low in comparison with their high static strengths. It is important to know the fatigue strength of high strength Al alloys in the long life region beyond 10⁷ cycles… More >

Dimitri Bigot^1,*, Cyril Ott¹, Stéphane Guichard¹, Bruno Malet-Damour¹

Journal of Renewable Materials, Vol.7, No.6, pp. 505-516, 2019, DOI:10.32604/jrm.2019.04019

Abstract The use of bio-based materials in buildings has become more and more significant last years. In most of the cases, their health properties and natural provenance have made them a great solution to face global climate warming and the new policies to reduce building energy consumption. In many thermal problems, bio-based materials can allow to optimize the building thermal behavior according to its energy consumption and inside comfort conditions. So it is when they are used as an insulation material in the building. However, it is not the case in this paper. In fact, the bio-based matter is rather used… More >

Charlotte Grosse^1,2,*, Marion Noël¹, Marie-France Thévenon³, Lauri Rautkari⁴, Philippe Gérardin²

Journal of Renewable Materials, Vol.6, No.3, pp. 259-269, 2018, DOI:10.7569/JRM.2017.634176

Abstract Impregnation of dry wood with pure lactic acid oligomers (OLAs) followed by heat treatment confers promising properties to wood because of OLA's good diffusion, in-situ polymerization and persistence in cell walls. Treatment provides drastic reduction of the equilibrium moisture content, high dimensional stability and good durability. The presence of water during treatment has been evaluated. Curing of OLA impregnated dry wood in humid atmosphere leads to a strong and global degradation of the material. OLA treatment of wet wood only impacts the water leaching rate negatively. Treatment of dry wood with OLA diluted in water additionally decreases the biological resistance… More >