Ida Bagus Alit, I Gede Bawa Susana^*

Frontiers in Heat and Mass Transfer, Vol.17, No.1, pp. 1-7, 2021, DOI:10.5098/hmt.17.15

Abstract Rice husk is a cheap fuel source and it is abundantly available in Indonesia. The heat exchanger mechanism was used in other to, the dried material was not contaminated by the combustion gases. The drying system consists of three components which include the furnace, heat exchanger pipe, and drying chamber. The heat exchanger pipe connects the furnace with the drying chamber and transfers the heat generated from rice husk burning to the drying chamber. The drying chamber was the section for drying the jackfruit dodol. It consists of 4 shelves and is equipped with an exhaust fan. The results showed… More >

Vikas Gulia, Anirban Sur^*

Frontiers in Heat and Mass Transfer, Vol.18, No.1, pp. 1-10, 2022, DOI:10.5098/hmt.18.40

Abstract Over the past few decades, the world is moving towards miniature products owing to the technological developments in variegated industrial domains such as aerospace, biomedical, electronics, etc. This has led to the exponential growth of efficient micro cooling systems which are light in weight and have effective thermal performance. Microchannel Heat Sinks and Microchannel Heat Exchangers are the widely adopted solutions for such efficient micro cooling systems. This paper comprehensively reviews the recent developments in the field of Microchannel Heat Sinks and Microchannel Heat Exchangers. Initially, the concept of microchannel cooling is discussed. Further, a comprehensive review of materials, fabrication… More >

Scott Wahlquist^a, Amir Ali^a,b,*, Su-Jong Yoon^c, Piyush Sabharwall^c

Frontiers in Heat and Mass Transfer, Vol.18, No.1, pp. 1-8, 2022, DOI:10.5098/hmt.18.35

Abstract The heat transfer performance of a novel tube configuration that combines the swirling velocity induced by oval-twisting and secondary flow generated by a helical geometrical flow path is presented. The Nusselt number (Nu) and friction factor (f) are compared for the laminar flow regime (Re = 250- 2000) under isothermal wall conditions. Under the same flow and boundary conditions, the oval-twisted helical tube increased the Nu and slightly increased the f over the circular helical tube. The best performance with the highest Nuand lowest f occurs at the coil curvature ratio (d_h/D) of 0.17. The quantified enhancement performance factor (h)… More >

Ida Bagus Alit, I Gede Bawa Susana^* , I Made Mara

Frontiers in Heat and Mass Transfer, Vol.19, No.1, pp. 1-7, 2022, DOI:10.5098/hmt.19.25

Abstract The study compared solar dryers with hot air from a heat exchanger double furnace during the drying of white turmeric. Solar drying is the process of drying the product in the sun. The hot air dryer consists of two furnaces with heat exchanger pipes and a drying chamber with six vertical shelves. During the test, the use of rice husk energy in a constant amount of 35 kg. Temperature and drying rate are higher in hot air dryers. Tests carried out for 420 minutes resulted in a change in moisture content from 88% to 35.88% and an average temperature of… More >

Peter van den Engel^1,*, Michael Malin², Nikhilesh Kodur Venkatesh¹, Luigi Antonio de Araujo Passos¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.3, pp. 783-805, 2023, DOI:10.32604/fdmp.2022.021962

Abstract This research evaluates the performance of a Phase Change Material (PCM) battery integrated into the climate system of a new transparent meeting center. The main research questions are: a. “Can the performance of the battery be calculated?” and b. “Can the battery reduce the heating and cooling energy demand in a significant way?” The first question is answered in this document. In order to be able to answer the second question, especially the way the heat loading in winter should be improved, then more research is necessary. In addition to the thermal battery, which consists of Phase Change Material plates,… More > Graphic Abstract

Zhaiyk Tokhtarov^1,*, Vitaly Perov², Vitaly Borisov³, Evgeny Tikhomirov⁴, Olga Grunina⁵, Nadezhda Kapustina^5,6, Elmira Cherkasova⁷, Natalya Suray⁵

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.4, pp. 1015-1024, 2022, DOI:10.32604/fdmp.2022.019534

Abstract After conducting a critical survey of the different categories of existing heat exchangers, the results of several experiments about the behaviour of a two-phase current in an open channel are reported. The results confirm the complexity of the problems induced in heat exchangers by flow maldistribution, especially when two-phase flows are considered in multi-channel systems. It is shown that severe misalignment of heat exchangers can lead to a loss of economic performance of more than 25%. Improper distribution of fluid flow causes longer fluid coils to form, and the liquid cochlea can eventually occupy a large space, thereby reducing heat… More >

Fenwicks Shombe Musonye^1,*, Hiram Ndiritu², Robert Kinyua³

Energy Engineering, Vol.118, No.2, pp. 211-224, 2021, DOI:10.32604/EE.2021.013890

Abstract Pinch Analysis is an attractive solution for reduction of thermal energy costs in thermo-chemical industries. In this approach, maximum internally recoverable heat is determined and a heat exchange network is designed to meet the recovery targets. The thermal performance of a heat exchanger over its lifetime is however a concern to industries. Thermal performance of a heat exchanger is affected by many factors which include the physical properties of the shell and tube materials, and the chemical properties of the heat transfer fluid. In this study, thermal performance of shell and tube heat exchangers designed to meet heat recovery targets… More >

Mohamed Salmi^1,2, Younes Menni³, Ali J. Chamkha^4,5,*, Houari Ameur⁶, Rachid Maouedj⁷, Ahmed Youcef⁷

CMES-Computer Modeling in Engineering & Sciences, Vol.126, No.1, pp. 147-173, 2021, DOI:10.32604/cmes.2021.012839

Abstract The hydrothermal behavior of air inside a solar channel heat exchanger equipped with various shaped ribs is analyzed numerically. The bottom wall of the exchanger is kept adiabatic, while a constant value of the temperature is set at the upper wall. The duct is equipped with a flat rectangular fin on the upper wall and an upstream V-shaped baffle on the lower wall. Furthermore, five hot wall-attached rib shapes are considered: trapezoidal, square, triangular pointing upstream (type I), triangular pointing downstream (type II), and equilateral-triangular (type III) cross sections. Effects of the flow rates are also inspected for various Reynolds… More >

Robert Plant^*, M. Ziad Saghir

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.1, pp. 18-18, 2019, DOI:10.32604/icces.2019.04980

Abstract Fluids have been used to maintain operational temperatures for machinery for as long as machines have been developed. Over time different mediums have been explored, such as oils and waxes. These different mediums have had varying impacts on the overall system such as improving the heat capacity but at the cost and strain on the system of requiring more pumping power. Some mediums, while they provide an improvement can also damage to the system itself over time with unwanted interactions such corrosion. In this paper we will examine the implementation and suspension into the working fluid of Micro Encapsulated Phase… More >