Boonchai Lertnuwat

Frontiers in Heat and Mass Transfer, Vol.18, pp. 1-9, 2022, DOI:10.5098/hmt.18.1

Abstract The aim of this work is to numerically investigate the effect of mounting winglet vortex generators on different positions in rectangular-duct-type air heaters. The two investigated positions were the absorber plate and the insulation plate, opposite to the absorber plate. Four shapes of winglet vortex generator, i.e. perforated rectangular winglet vortex generators (P-RWVG), rectangular winglet vortex generators (RWVG), perforated trapezoidal winglet vortex generators (P-TWVG) and trapezoidal winglet vortex generators (TWVG), were used. Results showed that heat-transfer capability would be better if the winglet vortex generators were mounted on the opposite insulation plate in the cases of P-RWVG, RWVG and P-TWVG. More >

Alim Al Ayub Ahmed^1,*, Salim Oudah Mezan², Binyamin³, Murtadha Doghiam Abdullah⁴, Elena Tesleva⁵, Linar G. Akhmetov⁶, Rustem Zalilov⁷, Mustafa M. Kadhim^8,9,10, Abduladheem Turki Jalil^11,12

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.1, pp. 15-24, 2023, DOI:10.32604/fdmp.2022.019922

Abstract The utilization of vortex generators to increase heat transfer from cylinders installed inside a duct is investigated. In particular, a channel containing eight cylinders with volumetric heat sources is considered for different values of the Reynolds number. The effective possibility to use vortex generators with different sizes to increase heat transfer and, consequently, reduce the surface temperature of the cylinders is examined. Also, the amount of pressure drop inside the channel due to the presence of vortex generators is considered and compared with the cases without vortex generators. The results show that although the addition of generators increases the pressure… More >

Muhammad Fahad Khan^1,2,*, Khalid Saleem¹, Mohammed Alotaibi³, Mohammad Mazyad Hazzazi⁴, Eid Rehman², Aaqif Afzaal Abbasi², Muhammad Asif Gondal⁵

CMC-Computers, Materials & Continua, Vol.73, No.2, pp. 2679-2696, 2022, DOI:10.32604/cmc.2022.027655

Abstract Internet of Things is an ecosystem of interconnected devices that are accessible through the internet. The recent research focuses on adding more smartness and intelligence to these edge devices. This makes them susceptible to various kinds of security threats. These edge devices rely on cryptographic techniques to encrypt the pre-processed data collected from the sensors deployed in the field. In this regard, block cipher has been one of the most reliable options through which data security is accomplished. The strength of block encryption algorithms against different attacks is dependent on its nonlinear primitive which is called Substitution Boxes. For the… More >

P. Srinivasan^1,*, P. Jagatheeswari²

Intelligent Automation & Soft Computing, Vol.35, No.1, pp. 381-397, 2023, DOI:10.32604/iasc.2023.024179

Abstract Renewable energy production plays a major role in satisfying electricity demand. Wind power conversion is one of the most popular renewable energy sources compared to other sources. Wind energy conversion has two major types of generators such as the Permanent Magnet Synchronous Generator (PMSG) and the Doubly Fed Induction Generator (DFIG). The maximum power tracking algorithm is a crucial controller, a wind energy conversion system for generating maximum power in different wind speed conditions. In this article, the DFIG wind energy conversion system was developed in Matrix Laboratory (MATLAB) and designed a machine learning (ML) algorithm for the rotor and… More >

S. Nithya Devi^1,*, S. Sasipriya²

Computer Systems Science and Engineering, Vol.43, No.2, pp. 423-437, 2022, DOI:10.32604/csse.2022.022280

Abstract In real-time applications, unpredictable random numbers play a major role in providing cryptographic and encryption processes. Most of the existing random number generators are embedded with the complex nature of an amplifier, ring oscillators, or comparators. Hence, this research focused more on implementing a Hybrid Nature of a New Random Number Generator. The key objective of the proposed methodology relies on the utilization of True random number generators. The randomness is unpredictable. The additions of programmable delay lines will reduce the processing time and maintain the quality of randomizing. The performance comparisons are carried out with power, delay, and lookup… More >

S. Marisargunam^1,*, L. Kalaivani², R. V. Maheswari²

Intelligent Automation & Soft Computing, Vol.33, No.3, pp. 1711-1727, 2022, DOI:10.32604/iasc.2022.023643

Abstract Wind Energy Conversion Systems (WECS) are extensively used for connecting directly to grid sources. Permanent magnet synchronous generator (PMSG) based WECS is coupled to both grid and machine through converters. PMSG usually associated rectifiers with converters and voltage source converters at machine side. In this work, PMSG associated rectifiers with converters are considered for analysis of grid stability. The proposed work used Particle Swarm Optimization (PSO) based optimization methods for extraction of maximum power within boundary condition in WECS operation using PMSG. This high-tech optimization has MPPT controller for pitch angle controller (PAC) combines with PSO optimized controllers for converter… More >

Nidal M. Turab¹, Hamza Abu Owida², Jamal I. Al-Nabulsi^2,*, Mwaffaq Abu-Alhaija¹

Computer Systems Science and Engineering, Vol.40, No.1, pp. 167-177, 2022, DOI:10.32604/csse.2022.017973

Abstract The human body contains a near-infinite supply of energy in chemical, thermal, and mechanical forms. However, the majority of implantable and wearable devices are still operated by batteries, whose insufficient capacity and large size limit their lifespan and increase the risk of hazardous material leakage. Such energy can be used to exceed the battery power limits of implantable and wearable devices. Moreover, novel materials and fabrication methods can be used to create various medical therapies and life-enhancing technologies. This review paper focuses on energy-harvesting technologies used in medical and health applications, primarily power collectors from the human body. Current approaches… More >

Dandan Song^1,*, Lianjun Zhou¹, Ziqi Peng², Senhua Luo², Jun Zhu³

Energy Engineering, Vol.118, No.5, pp. 1439-1452, 2021, DOI:10.32604/EE.2021.015011

Abstract The axial flux permanent magnet (AFPM) generator with double-sided internal stator structure is highly suitable for vertical axis wind turbines due to its high power density. The performance of the AFPM generator with double-sided internal stator structure can be improved by the reasonable design of electromagnetic parameters. To further improve the overall performance of the AFPM generator with double-sided internal stator structure, multivariable (coil width ω_c, permanent magnet thickness h, pole arc coefficient α_p and working air gap l_g) and multi-objective (generator efficiency η, total harmonic distortion of the voltage THD and induced electromotive force amplitude EMF) functional relationships are… More >

Hui Wang, Haocheng Xu^*, Wenhui Zhao

Energy Engineering, Vol.118, No.5, pp. 1375-1394, 2021, DOI:10.32604/EE.2021.014641

Abstract Under the background of implementing renewable portfolio standards and the ever-improving tradable green certificate scheme, the increasingly environmentally-friendly preference of power users is leading to changes in electricity demand, which, in turn, is driving changes in the decision-making behaviors of various actors in the power supply chain. Based on this, with the goal of pursuing maximum profit, consumer-power-demand functions have been introduced with some consideration of the factors of consumer preference to establish an optimal profit model for each trading subject in non-cooperative states of the power supply chain, under the constraints of meeting renewable energy portfolio standards. Here, the… More >

Rachid Maouedj¹, Younes Menni², Mustafa Inc^3,4,*, Yu-Ming Chu^5,6,*, Houari Ameur⁷, Giulio Lorenzini⁸

CMES-Computer Modeling in Engineering & Sciences, Vol.126, No.3, pp. 855-889, 2021, DOI:10.32604/cmes.2021.014524

Abstract Re-engineering the channel heat exchangers (CHEs) is the goal of many recent studies, due to their great importance in the scope of energy transport in various industrial and environmental fields. Changing the internal geometry of the CHEs by using extended surfaces, i.e., VGs (vortex generators), is the most common technique to enhance the efficiency of heat exchangers. This work aims to develop a new design of solar collectors to improve the overall energy efficiency. The study presents a new channel design by introducing VGs. The FVM (finite volume method) was adopted as a numerical technique to solve the problem, with… More >