Jiangfeng Guo^1,2,3,*, Hongjie Yu¹

Frontiers in Heat and Mass Transfer, Vol.22, No.6, pp. 1575-1595, 2024, DOI:10.32604/fhmt.2024.058179 - 19 December 2024

Abstract Based on the first and second laws of thermodynamics, the heat transfer and flow (thermohydraulic) characteristics of horizontal supercritical pressure CO₂ (S-CO₂) in a circular pipe under heating conditions were investigated numerically. Heating flows in two different diameters (d) of 4 and 6 mm were simulated in pipes with pressures of 8 MPa, mass fluxes (G) of 300 and 400 kg/(m²·s), and heat fluxes (q) of 50, 75 and 100 kW/m². In the d = 4 mm pipe, the peak heat transfer coefficient (h_b) was about 3 times higher than in the d = 6 mm pipe, while the entropy… More > Graphic Abstract

Cha’o-Kuang Chen¹, Shing-Cheng Chang¹, Szu-Yu Sun¹

CMES-Computer Modeling in Engineering & Sciences, Vol.22, No.3, pp. 203-216, 2007, DOI:10.3970/cmes.2007.022.203

Abstract In this study, the channel flow is discussed by the LBM simulations. In the cases of channel with obstacles inside, the square pillars play the role of causing interruption within the fluid field, and hence change the direction of fluid flow. The recirculation region is formed behind the obstacles and influences the fluid passed through not only in the velocity field but also in the temperature field. Therefore, heat transfer is enhanced in local region.
The field synergy principle is applied in the research to demonstrate that the increased interruption within the fluid increases the More >