Yanju Wei^1,*, Shengcai Deng¹, Jie Zhang¹, Yajing Yang², Hao Chen³

Energy Engineering, Vol.118, No.2, pp. 225-235, 2021, DOI:10.32604/EE.2021.012416 - 23 December 2020

Abstract The aerodynamic breakup of the droplet has been intensely studied in this paper. We aim to establish a unified relationship between dimensionless kinematic parameters such as displacement, spreading diameter, Weber number, time, and so on. The breakup characteristics of the acoustic levitated ethanol droplet are experimentally investigated when exposed to an air jet flow. The breakup phenomenons were recorded with a high-speed camera. The breakup characteristics were analyzed, and the physical models of the moving and transforming behaviors were established to explain the breakup mechanisms. We found that the displacement of the windward side of More >

Tawfiq Chekifi^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.5, pp. 545-555, 2019, DOI:10.32604/fdmp.2019.01793

Abstract Numerical simulation using Ansys Fluent code is performed, to investigate droplet generation in cross-junction based VOF method. Droplets of water are generated by the shear stress applied by continuous phase (oil), two configurations of cross-junction are suggested; the first is a simple model no modification is performed at the outer channel, while the second model is characterized by a lateral obstacle. we study the effect of velocity ratio, viscous parameter, interfacial tension, flow condition on droplet size and frequency, the effect of lateral obstacles on droplets generation is also focused and analysed. The numerical simulations… More >

Chekifi. T^1,2, Dennai. B¹, Khelfaoui. R¹

FDMP-Fluid Dynamics & Materials Processing, Vol.11, No.3, pp. 205-220, 2015, DOI:10.3970/fdmp.2015.011.205

Abstract Droplet generation, splitting and sorting are investigated numerically in the framework of a VOF technique for interface tracking and a finite-volume numerical method using the commercial code FLUENT. Droplets of water-in-oil are produced by a flow focusing technique relying on the use of a microchannell equipped with an obstacle to split the droplets. The influence of several parameters potentially affecting this process is investigated parametrically towards the end of identifying "optimal" conditions for droplet breakup. Such parameters include surface tension, the capillary number and the main channel width. We show that the capillary number plays More >