Bo Liu^1,2,*, Jia Xie², Gonghua Chen², Yugang Gong², Hongliang Yao¹, Tiegang Li¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.30, No.4, pp. 1-1, 2024, DOI:10.32604/icces.2024.012904

Abstract Biodegradable metal implants that meet clinical applications require good mechanical properties and an appropriate biodegradation rate. Additively manufactured (AM) biodegradable zinc (Zn) alloys constitute an essential branch of orthopedic implants because of their moderate degradation and bone-mimicking mechanical properties. This paper investigated the microstructural evolution and corrosion mechanisms of zinc-copper (Zn-Cu) alloys prepared by the laser-powder-bed-fusion (L-PBF) additive manufacturing method. Alloying with Cu significantly increases the ultimate tensile strength (UTS) of unalloyed Zn, but the UTS and ductility of unalloyed Zn and Zn-2Cu decrease with increasing laser energy density. Unalloyed Zn has a dendritic microstructure,… More >

Yuanzhen Hou¹, YinBo Zhu¹, Heng-an Wu^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.30, No.4, pp. 1-2, 2024, DOI:10.32604/icces.2024.011353

Abstract Traditional materials are emerging increasingly severe problems such as environmental pollution, non-renewability, and resource waste. As the most abundant natural biomass in nature, nanocellulose materials are expected to become a new generation of green, biodegradable, high-performance structural materials and contribute to sustainable development. Starting from the intrinsic relationship between hydrogen bonding network and microstructure deformation in nanocellulose, we performs the bottom-up multiscale mechanics methods, combing theoretical modeling, experimental characterization and material preparation, to reveal the physical mechanism and key characteristic parameters of the microstructure-regulated mechanical behaviors of nanocellulose materials, further establishing the cross-scale relationship between… More >

Binbin Guo^1,2, Hui Ying Yang^1,*, Jiaming Bai^2,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.29, No.4, pp. 1-1, 2024, DOI:10.32604/icces.2024.012673

Abstract Due to excellent electrical conductivity, stretchability, and biocompatibility, electrically conductive hydrogels have been widely used in flexible wearable strain sensors. Generally, conductive fillers need to be integrated with the hydrogel matrix to impart electrical conductivity. According to the method of composite formation between electronic conductive fillers and hydrogel matrix, conductive hydrogels can be classified into embedded conductive and coated conductive hydrogels. Additionally, due to the intrinsic chemical and physical crosslinking networks, traditional hydrogels are not degradable, resulting in severe environmental pollution problems. Herein, we designed electrically conductive and degradable hydrogels for the epidermal strain sensor… More >

Xingbang Li^1,#, Xuan Zheng^2,#, Bowen Jin¹, Yunyan Li¹, Yongyu Shao¹, Xiaoxian Deng¹, Dingyang Li¹, Shanshan Li¹, Hongmei Zhou¹, Jie Zhang³, Xianya Zhang⁴, Qunshan Shen¹, Gangcheng Zhang^2,*

Congenital Heart Disease, Vol.18, No.4, pp. 489-489, 2023, DOI:10.32604/chd.2023.031413 - 15 September 2023

Abstract This article has no abstract. More >

Xingbang Li^1,#, Xuan Zheng^2,#, Bowen Jin¹, Yunyan Li¹, Yongyu Shao¹, Xiaoxian Deng¹, Dingyang Li¹, Shanshan Li¹, Hongmei Zhou¹, Jie Zhang³, Xianya Zhang⁴, Qunshan Shen¹, Gangcheng Zhang^2,*

Congenital Heart Disease, Vol.18, No.3, pp. 373-385, 2023, DOI:10.32604/chd.2023.028979 - 09 June 2023

Abstract Background: Transcatheter closure of patent foramen ovale (PFO) has been widely accepted as a highly effective way to treat high-risk PFO-related diseases. However, traditional non-degradable occluders made of metal alloys will permanently exist in the body, resulting in thrombosis, valve damage, hemolysis, arrhythmia, or other complications. The biodegradable PFO occluder developed by Shanghai Mallow Medical Instrument Co., Ltd., China can be fully absorbed and degrade into nontoxic ingredients, reducing postoperative complications. Objectives: To study the safety and efficacy of biodegradable PFO occluders in treating PFO. Methods: This single-center clinical trial collected 30 patients treated with a More > Graphic Abstract

Mochamad Chalid^1,*, Gifrandy Gustiraharjo¹, Azizah Intan Pangesty¹, Alyssa Adyandra¹, Yudan Whulanza², Sugeng Supriadi²

Journal of Renewable Materials, Vol.11, No.7, pp. 3043-3056, 2023, DOI:10.32604/jrm.2023.026788 - 05 June 2023

Abstract Polyethylene glycol (PEG) was added at different concentrations to the blend of poly(L-lactic acid) (PLLA) and poly(D,L-lactic acid)(PDLLA) to tailor the properties. The differential scanning calorimetry (DSC) measurement showed that all blends were miscible due to shifting a single glass transition temperature into a lower temperature for increasing PEG content. The DSC, FTIR, and XRD results implied the crystallinity enhancement for PEG content until 8 wt%, then decreased at 12 wt% PEG. The XRD result indicated the homo crystalline phase formation in all blends and no stereocomplex crystal. The in vitro degradation study indicated that… More > Graphic Abstract

Nurul Hanan Taharuddin¹, Ridhwan Jumaidin^2,*, Muhd Ridzuan Mansor¹, Fahmi Asyadi Md Yusof³, Roziela Hanim Alamjuri^4,*

Journal of Renewable Materials, Vol.11, No.1, pp. 131-145, 2023, DOI:10.32604/jrm.2022.021528 - 10 August 2022

Abstract The strict environmental regulations to overcome the drawbacks of consumption and disposal of non-renewable synthetic materials have motivated this investigation. The physical, chemical, morphological, and thermal properties of Hylocereus Polyrhizus peel (HPP) powder obtained from the raw materials were examined in this study. The physical properties analyzes of Hylocereus Polyrhizus peel (HPP) powder discovered that the moisture content, density, and water holding capacity were 9.70%, 0.45 g/cm3 , and 98.60%, respectively. Meanwhile, the chemical composition analysis of Hylocereus Polyrhizus peel (HPP) powder revealed that the powder was significantly high in cellulose contents (34.35%) from other bio-peel wastes. The… More > Graphic Abstract

XINGMIN XU¹, QINGQING SUN², AIRONG XU², XINBAO GUO²

Journal of Polymer Materials, Vol.39, No.1-2, pp. 167-181, 2022, DOI:10.32381/JPM.2022.39.1-2.11

Abstract Silk fibroin (SF) with renewability, biocompatibility and biodegradability shows potential application in various fields including biomedicine, tissue engineering, and wearable electronic devices. Herein, SF is used to exert effective reinforcement of polyvinyl alcohol (PVA) composite film to further improve its practicability. As such, PVA/SF composite films were prepared for the first time using a facile approach. The films were characterized to investigate possible interaction of PVA with SF. Meanwhile, systematic investigations have also been completed to explore the influences of PVA/SF mass ratio on the mechanical properties (tensile strength, elongation at break), biodegradability and biocompatibility, More >

Yongjie Zheng^1,2,3,*, Mingjian Xu¹, Jingzhi Tian¹, Meihong Yu¹, Bin Tan⁴, Hong Zhao^2,3,*, Yin Tang^2,3

Journal of Renewable Materials, Vol.10, No.11, pp. 2949-2959, 2022, DOI:10.32604/jrm.2022.019702 - 29 June 2022

Abstract Fully bio-based and biodegradable starch/polylactic acid blends have received increasing attentions for their biodegradability and potential to offset the use of unsustainable fossil resources, specifically, their application in packaging. Herein, corn starch was first esterified with maleic anhydride and then compounded with polylactide (PLA) to prepare esterified corn starch/polylactic acid blends with starch content up to 35 wt%. The structures, morphologies, thermal and mechanical properties of starch or blends were investigated. The results showed that corn starch was successfully grafted with maleic anhydride, which showed increased crystallinity and particle size than native starch. Esterified corn More >

Mahmood Hameed Majeed^*, Nabeel Kadhem Abd Alsaheb

Journal of Renewable Materials, Vol.10, No.9, pp. 2391-2408, 2022, DOI:10.32604/jrm.2022.019887 - 30 May 2022

Abstract Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease, injury, or congenital disabilities. Tissue engineering now uses artificial supporting structures called scaffolds to restore damaged tissues and organs. These are utilized to attach the right cells and then grow them. Rapid prototyping appears to be the most promising technology due to its high level of precision and control. Bone tissue replacement “scaffolding” is a common theme discussed in this article. The fused deposition technique was used to construct our scaffold, and a polymer called polylactic acids… More > Graphic Abstract