G. Hao^*, Z. Chen, R. Xian, W. Yifan

Chalcogenide Letters, Vol.22, No.3, pp. 255-260, 2025, DOI:10.15251/CL.2025.223.255

Abstract In present work, Cu₂BaSnS₄(CBTS) nanoparticles are reported solvothermally synthesized. The formation of single-phase trigonal structure of CBTS nanoparticles is confirmed by XRD and Raman spectroscopic analysis. SEM studies reveal that CBTS exhibits flower shaped structure self-assembling by nanosheets with uniform average thickness 30nm. CBTS materials show abroad absorption in the complete visible range, providing a band-gap value of 1.58eV, indicating potential applications in photocvoltaics. The excellent MB degradation efficiency of 93% under visible light within 100min is achieved, suggesting CBTS is a potential material for effective solar light photocatalytic application. Meanwhile, electrical properties are measured up More >

H. Guan^*, J. X. Xu, Z. Y. Yang, X. Y. Qian, M. Q. Zhao

Chalcogenide Letters, Vol.21, No.2, pp. 169-173, 2024, DOI:10.15251/CL.2024.212.169

Abstract Cu₂MgSnS₄ (CMTS) nanoparticles are successfully prepared via a solvothermal approach. X-ray diffraction (XRD) and Raman reveal that pure zinc-blende CMTS phase is obtained. Scanning electron microscopy (SEM) shows that CMTS nanoparticles exhibit microsphere structure. The band gap of as-obtained CMTS nanoparticles is calculated to be 1.68eV, indicating a potential candidate for tandem solar cells. The degradation rate of methylene blue (MB) with under visible-light irradiation is about 87%, indicating that CMTS can be useful for effective visible-light photocatalyst. More >

Selwin Maria Sekar¹, Rajini Nagarajan^1,*, Ponsuriyaprakash Selvakumar², Ismail Sikiru Oluwarotimi³, Kumar Krishnan⁴, Faruq Mohammad⁵, Mohammed Rafi Shaik⁵, Nadir Ayrilmis^6,*

Journal of Renewable Materials, Vol.12, No.8, pp. 1455-1474, 2024, DOI:10.32604/jrm.2024.052952 - 06 September 2024

Abstract An innovative microcrystalline cellulose (MCC) natural fibre powder-reinforced PLA biocomposite was investigated using the hand lay-up technique. The polymer matrix composite (PMC) samples were prepared by varying the weight percentages (wt.%) of both PLA matrix and MCC reinforcement: pure PLA/100:0, 90:10, 80:20, 70:30, 60:40 and 50:50 wt.%, respectively. From the results obtained, MCC powder, with its impressive aspect ratio, proved to be an ideal reinforcement for the PLA, exhibiting exceptional mechanical properties. It was evident that the 80:20 wt.% biocomposite sample exhibited the maximum improvement in the tensile, flexural, notched impact, compressive strength and hardness… More >