Wenfeng Hao^1,*, Hao Hao², Humaira Kanwal², Shiping Jiang^2,*

Journal of Renewable Materials, Vol.11, No.4, pp. 1687-1697, 2023, DOI:10.32604/jrm.2022.023795

Abstract Microcapsule self-healing technology is one of the effective methods to solve the durability problem of cement-based composites. The evaluation method of the self-healing efficiency of microcapsule self-healing cement-based composites is one of the difficulties that limits the self-healing technology. This paper attempts to characterize the self-healing efficiency of microcapsule self-healing cement-based composites by acoustic emission (AE) parameters, which provides a reference for the evaluation of microcapsule self-healing technology. Firstly, a kind of self-healing microcapsules were prepared, and the microcapsules were added into the cement-based composites to prepare the compression samples. Then, the specimen with certain pre damage was obtained by… More >

Ruixue Wu¹, Tiejun Zhao¹, Peng Zhang¹, Dingyi Yang², Miao Liu², Zhiming Ma^2,*

Journal of Renewable Materials, Vol.9, No.4, pp. 743-765, 2021, DOI:10.32604/jrm.2021.013669

Abstract

This work investigates the feasibility of utilizing reactive recycled powder (RP) from construction and demolition (C&D) waste as supplementary cementitious material (SCM) to achieve a ductile strain hardening cementitious composites (SHCC). The recycled mortar powder (RMP) from mortar waste, recycled concrete powder (RCP) from concrete waste and recycled brick powder (RBP) from clay brick waste were first prepared, and the micro-properties and tensile behavior of SHCC containing various types and replacement ratios of RPs were determined. The incorporated RP promotes pozzolanic and filler effects, while the hydration products in cementitious materials decrease with RP incorporation; therefore, the incorporated RP decreases… More >

Plínio B. Mundim¹, Rondinele A. R. Ferreira¹, Leila A. C. Motta¹, Mariana A. Henrique², Daniel Pasquini^2,*

Journal of Renewable Materials, Vol.8, No.8, pp. 891-903, 2020, DOI:10.32604/jrm.2020.010655

Abstract The objective of this work was to evaluate different superficial treatments of sisal fibres employing lignin, and their use as a reinforcement agent in cementitious composites. The treatments consisted of superficially impregnating sisal fibres (S) with organosolv lignin (LO), organosolv lignin and glutaraldehyde (LOG), Kraft lignin (LK) and Kraft lignin and glutaraldehyde (LKG). The fibre modifications were verified by FTIR-ATR and SEM analyzes, and the presence of lignin on the surface of the fibres was evidenced, confirming the effectiveness of the treatments. The mechanical, thermal (by TGA) and water absorption properties of the fibres before and after the modifications were… More >

Kunhwi Kim, Jong Min Park, John E. Bolander, Yun Mook Lim¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.12, No.1, pp. 5-6, 2009, DOI:10.3970/icces.2009.012.005

Abstract Fiber reinforced cementitious composites (FRCC) are the most recently used materials in the civil engineering field due to their mechanical advantages over the cementitious materials. While, the durability performance of cement-based composites can affect the service life of the structural component or system. Sometimes, incompatible behaviors (e.g. thermal expansion, moisture diffusion) among components cause micro-cracking and further durability problems. Physical experimentations have generally been used for understanding the durability of cementitious composites, but increasingly computational simulations are being used to gain new insights. However, the most of existing simulation models are limited in coupling with micro-cracking due to moisture diffusion… More >